Home > Household appliances > Fridge-Freezers > Whirlpool Fridge-Freezers > Whirlpool WRT313CZLZ Fridge-Freezer

Manual Whirlpool WRT313CZLZ Fridge-Freezer

Need a manual for your Whirlpool WRT313CZLZ Fridge-Freezer? Below you can view and download the PDF manual for free in English. This product currently has 18 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Location Requirements

IMPORTANT: This refrigerator is designed for indoor, household

use only.

To ensure proper ventilation for your refrigerator, it is

recommended to allow a 1/2" (1.25 cm) space on each side.

Allow 1½" (3.81 cm) of space between overhead cabinets and

refrigerator top. Allow at least 1" (2.54 cm) between back of

cabinet and the wall (consider the condenser as back in case

is present). If your refrigerator has an ice maker, make sure you

leave extra space at the back for the water line connections.

If you are installing your refrigerator next to a fixed wall, leave

enough space on the hinge side to allow the door to swing open.

NOTE: This refrigerator is intended for use in a location where

the temperature ranges from a minimum of 55°F (13°C) to a

maximum of 110°F (43°C). The preferred room temperature

range for optimum performance, which reduces electricity usage

and provides superior cooling, is between 60°F (15°C) and 90°F

(32°C). It is recommended that you do not install the refrigerator

near a heat source, such as an oven or radiator.

Electrical Requirements

Before you move your refrigerator into its final location, it is

important to make sure you have the proper electrical

connection.

Recommended Grounding Method

A 115 V, 60 Hz, AC only, 15A or 20A fused, grounded

electrical supply is required. It is recommended that a separate

circuit serving only your refrigerator be provided. Use an outlet

that cannot be turned off by a switch. Do not use an extension

cord.

NOTE: Before performing any type of installation or cleaning, or

removing a light bulb, turn cooling off or turn the control

(Thermostat, Refrigerator or Freezer Control depending on the

model) to OFF, and then disconnect the refrigerator from the

electrical source. When you are finished, reconnect the

refrigerator to the electrical source, and turn cooling on or reset

the control (Thermostat, Refrigerator or Freezer Control,

depending on the model) to the desired setting. See “Using the

Controls” in the User Instructions, User Guide, or Use & Care

Guide.

Water Supply Requirements

Read all directions before you begin.

IMPORTANT:

■ Connect to potable water supply only.

Do not use with water that is microbiologically unsafe or of

unknown quality without adequate disinfection before or after

the system. Systems certified for cyst reduction may be used on

disinfected waters that may contain filterable cysts.

■ If you turn the refrigerator on before the water line is

connected, turn the ice maker off.

■ All installations must meet local plumbing code

requirements.

■ Use copper tubing and check for leaks. Install copper tubing

only in areas where the household temperatures will remain

above freezing.

TOOLS NEEDED: Flat-blade screwdriver, 7/16" and 1/2"

open-end wrenches or 2 adjustable wrenches, 1/4" nut driver

and drill bit, cordless drill. Gather the required tools and parts

before starting installation. Read and follow the instructions

provided with any tools listed.

NOTE: Your refrigerator dealer has a kit available with a

½" (6.35 mm) saddle-type shutoff valve, a union, and copper

tubing. Before purchasing, make sure a saddle-type valve

complies with your local plumbing codes. Do not use a

piercing-type or 3/16" (4.76 mm) saddle valve which reduces

water flow and clogs more easily.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

1" (2.54 cm)

1½" (3.81 cm)

1/2" (1.25 cm)

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Rating

Let us know what you think about the Whirlpool WRT313CZLZ Fridge-Freezer by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Whirlpool WRT313CZLZ Fridge-Freezer?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Whirlpool WRT313CZLZ Fridge-Freezer. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Whirlpool WRT313CZLZ Fridge-Freezer. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Whirlpool. They might be able to provide an original manual. Are you looking for the manual of your Whirlpool WRT313CZLZ Fridge-Freezer in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Whirlpool
Model	WRT313CZLZ
Category	Fridge-Freezers
File type	PDF
File size	2.71 MB

All manuals for Whirlpool Fridge-Freezers
More manuals of Fridge-Freezers

Frequently Asked Questions about Whirlpool WRT313CZLZ Fridge-Freezer

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

If I want my fridge-freezer to be colder, should I choose for a higher or lower setting? Verified

With most fridge-freezers a higher setting means the machine will cool harder. With a lower setting, the machine will cool less hard and the temperature in the fridge-freezer will be higher.

This was helpful (7560) Read more

Can I change the opening direction of the door of my fridge-freezer? Verified

Yes, nearly all standing fridge-freezers offer the option to place the door on the other side. How to do this can generally be found in the manual.

This was helpful (4090) Read more

What is the best temperature setting for a refrigerator? Verified

From a health perspective temperatures between 3℃ and 4℃ are the best. At these temperatures the growth of bacteria and mold is limited.

This was helpful (3362) Read more

The drain hole in my fridge-freezer is dirty/clogged, how do I clean it? Verified

There are special cleaning devices to do this, but it is also possible to remove blockage or dirt with a cotton swab. To keep the drain hole clean and prevent smells it is advisable to put a drop of chlorine bleach in the drain 4 times a year.

This was helpful (3066) Read more

How often should I defrost my freezer? Verified

For optimal use of the freezer it is best to defrost it once every 3-6 months. Ice on the inside of the freezer reduces the available space and increases the use of energy. The thawing process can be accelerated by placing hot water in the drawer or placing bowls of hot water in the freezer.

This was helpful (2439) Read more

My fridge-freezer makes a bubbling sound, is that normal? Verified

Modern fridge-freezers make use of an environmentally friendly cooling agent. During the cooling process this substance turns into a gas, which can cause a bubbling and/or hissing sound. This is perfectly normal.

This was helpful (2181) Read more

I bought a new fridge-freezer, can I turn it on immediately? Verified

No, the fridge-freezer needs to stand in an upright position for at least 4 hours before it can be turned on. This is because the coolant liquid needs to settle.

This was helpful (1477) Read more

Is it normal that water or ice drops are forming on the back wall of my fridge-freezer? Verified

Yes, this a completely normal phenomenom. The moisture that enters the fridge-freezer with warm air or products will settle on the coldest part, being the back wall. Because the back wall can reach temperatures below freezing, the drops will freeze from time to time. When the fridge-freezer is idle the drops will thaw and flow to the drain of the fridge-freezer.

This was helpful (1155) Read more

De door of my fridge-freezer will not close properly, why is that? Verified

The two most common causes are that the fridge-freezer is not level and that the door seal is damaged or has food remains on it. Make sure the fridge-freezer is level and check the door seal. Replace the seal if neccesary.

This was helpful (1008) Read more

How much space should I leave betwee my fridge-freezer and the wall? Verified

To ensure a good ventilation it's best to leave at least 5cm of free space on both sides and the back of the fridge-freezer.

This was helpful (942) Read more

What does '6th Sense' mean? Verified

Whirlpool appliances that are equipped with 6th Sense technology have sensors that ensure optimal operation of the machine. For example in dryers, these sensors measure the moisture left in the wash and stops the machine when everything is completely dry.

This was helpful (802) Read more

What do the stars on the freezer mean? Verified

The stars indicate the freezing capacity. 1 star indicates a freezing capacity down to -6ºC. This makes the freezer suitable for making ice cubes or storing previously frozen goods for up to two weeks. Fresh food cannot be frozen. 2 stars indicates a freezing capacity down to -12ºC. This makes the freezer suitable for storing previously frozen goods for up to two months. Fresh food cannot be frozen. 3 stars indicates a freezing capacity down to -18ºC. This makes the freezer suitable

This was helpful (732) Read more

How long does it take for my refrigerator to reach the set temperature after I turn it on? Verified

This depends on the size, age and model of the refrigerator. It may take several hours to 24 hours for the refrigerator to reach the set temperature. The process can be accelerated by placing non-perishable goods in the refrigerator. The temperature in the refrigerator cannot be measured properly by feeling the air inside. The best way to tell if the refrigerator has reached the set temperature is to place a glass of water in the refrigerator with a thermometer in it.

This was helpful (631) Read more

There is condensation in my refrigerator, why is that? Verified

There can be several causes. The door gasket can be defective, allowing outside air into the refrigerator. It's also possible that the refrigerator is not level, preventing the door from closing correctly. Another cause is a large difference between the temperature inside the refrigerator and outside while the door is being opened frequently.

This was helpful (528) Read more

There is mold on the rubber seals of my fridge-freezer, what should I do? Verified

The rubber seals are not actually inside the fridge-freezer and are therefore warmer. This allows bacteria to grow and mold to form. Clean the rubbers regularly to prevent this.

This was helpful (473) Read more

What is R-410A? Verified

R-410A is a cooling agent that is used in appliances that cool up to 0°C, like refrigerators and air conditioners. It is the replacement of older cooling agents and does not damage the ozon layer.

This was helpful (472) Read more