Home > Household appliances > Fridge-Freezers > Maytag Fridge-Freezers > Maytag MRT711BZDH Fridge-Freezer

Manual Maytag MRT711BZDH Fridge-Freezer

Need a manual for your Maytag MRT711BZDH Fridge-Freezer? Below you can view and download the PDF manual for free in English. This product currently has 16 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Water Pressure

IMPORTANT: A cold water supply with water pressure between

30 and 120 psi (207 and 827 kPa) is required to operate the ice

maker.

NOTE: If the water pressure is less than what is required, ice

cubes could be hollow or irregular shaped.

If you have questions about your water pressure, call a licensed,

qualified plumber.

Reverse Osmosis Water Supply

If a reverse osmosis water filtration system is connected to your

cold water supply, the water pressure to the reverse osmosis

system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the ice maker is still not operating properly:

■ Check to see whether the sediment filter in the reverse

osmosis system is blocked. Replace the filter if necessary.

■ Allow the storage tank on the reverse osmosis system to refill

after heavy usage.

Connect the Water Supply

Read all directions before you begin.

IMPORTANT: If you turn ON the refrigerator before the water line

is connected, turn OFF the ice maker.

Connect to Water Line

1. Unplug refrigerator or disconnect power.

2. Turn OFF main water supply. Turn ON nearest faucet long

enough to clear line of water.

3. Locate a ½" to 1¹⁄₄" (1.25 cm to 3.18 cm) vertical cold water

pipe near the refrigerator.

IMPORTANT:

■ Make sure it is a cold water pipe.

■ Horizontal pipe will work, but drill on the top side of the

pipe, not the bottom. This will help keep water away from

the drill and normal sediment from collecting in the valve.

4. Determine the length of copper tubing you need. Measure

from the connection on the lower left rear of refrigerator to the

water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄"

(6.35 mm) O.D. (outside diameter) copper tubing. Be sure both

ends of copper tubing are cut square.

5. Using a cordless drill, drill a ¹⁄₄" hole in the cold water pipe you

have selected.

6. Fasten the shutoff valve to the cold water pipe with the pipe

clamp. Be sure the outlet end is solidly in the ¹⁄₄" drilled hole in

the water pipe and that the washer is under the pipe clamp.

Tighten the packing nut. Tighten the pipe clamp screws slowly

and evenly so washer makes a watertight seal. Do not

overtighten or you may crush the copper tubing.

7. Slip the compression sleeve and compression nut on the

copper tubing as shown. Insert the end of the tubing into the

outlet end squarely as far as it will go. Screw compression nut

onto outlet end with adjustable wrench. Do not overtighten.

8. Place the free end of the tubing in a container or sink, and turn

ON the main water supply. Flush the tubing until water is clear.

Turn OFF the shutoff valve on the water pipe. Coil the copper

tubing.

Connect to Refrigerator

1. Unplug refrigerator or disconnect power.

2. Attach the copper tubing to the valve inlet using a

compression nut and sleeve as shown. Tighten the

compression nut. Do not overtighten.

3. Use the tube clamp on the back of the refrigerator to secure

the tubing to the refrigerator as shown. This will help avoid

damage to the tubing when the refrigerator is pushed back

against the wall.

4. Turn shutoff valve ON.

5. Check for leaks. Tighten any connections (including

connections at the valve) or nuts that leak.

6. The ice maker is equipped with a built-in water strainer. If your

water conditions require a second water strainer, install it in

the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain

a water strainer from your nearest appliance dealer.

Complete the Installation

1. Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard

the first three batches of ice produced. Allow 3 days to completely

fill ice container.

A. Cold water pipe

B. Pipe clamp

C. Copper tubing

D. Compression nut

E. Compression sleeve

F. Shutoff valve

G. Packing nut

DEF

A. Tube clamp

B. Tube clamp screw

C. Copper tubing

D. Compression nut

E. Valve inlet

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Rating

Let us know what you think about the Maytag MRT711BZDH Fridge-Freezer by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Maytag MRT711BZDH Fridge-Freezer?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Maytag MRT711BZDH Fridge-Freezer. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Maytag MRT711BZDH Fridge-Freezer. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Maytag. They might be able to provide an original manual. Are you looking for the manual of your Maytag MRT711BZDH Fridge-Freezer in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Maytag
Model	MRT711BZDH
Category	Fridge-Freezers
File type	PDF
File size	2.15 MB

All manuals for Maytag Fridge-Freezers
More manuals of Fridge-Freezers

Frequently Asked Questions about Maytag MRT711BZDH Fridge-Freezer

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

If I want my fridge-freezer to be colder, should I choose for a higher or lower setting? Verified

With most fridge-freezers a higher setting means the machine will cool harder. With a lower setting, the machine will cool less hard and the temperature in the fridge-freezer will be higher.

This was helpful (7495) Read more

Can I change the opening direction of the door of my fridge-freezer? Verified

Yes, nearly all standing fridge-freezers offer the option to place the door on the other side. How to do this can generally be found in the manual.

This was helpful (4048) Read more

What is the best temperature setting for a refrigerator? Verified

From a health perspective temperatures between 3℃ and 4℃ are the best. At these temperatures the growth of bacteria and mold is limited.

This was helpful (3317) Read more

The drain hole in my fridge-freezer is dirty/clogged, how do I clean it? Verified

There are special cleaning devices to do this, but it is also possible to remove blockage or dirt with a cotton swab. To keep the drain hole clean and prevent smells it is advisable to put a drop of chlorine bleach in the drain 4 times a year.

This was helpful (3025) Read more

How often should I defrost my freezer? Verified

For optimal use of the freezer it is best to defrost it once every 3-6 months. Ice on the inside of the freezer reduces the available space and increases the use of energy. The thawing process can be accelerated by placing hot water in the drawer or placing bowls of hot water in the freezer.

This was helpful (2423) Read more

My fridge-freezer makes a bubbling sound, is that normal? Verified

Modern fridge-freezers make use of an environmentally friendly cooling agent. During the cooling process this substance turns into a gas, which can cause a bubbling and/or hissing sound. This is perfectly normal.

This was helpful (2173) Read more

I bought a new fridge-freezer, can I turn it on immediately? Verified

No, the fridge-freezer needs to stand in an upright position for at least 4 hours before it can be turned on. This is because the coolant liquid needs to settle.

This was helpful (1459) Read more

Is it normal that water or ice drops are forming on the back wall of my fridge-freezer? Verified

Yes, this a completely normal phenomenom. The moisture that enters the fridge-freezer with warm air or products will settle on the coldest part, being the back wall. Because the back wall can reach temperatures below freezing, the drops will freeze from time to time. When the fridge-freezer is idle the drops will thaw and flow to the drain of the fridge-freezer.

This was helpful (1133) Read more

De door of my fridge-freezer will not close properly, why is that? Verified

The two most common causes are that the fridge-freezer is not level and that the door seal is damaged or has food remains on it. Make sure the fridge-freezer is level and check the door seal. Replace the seal if neccesary.

This was helpful (1001) Read more

How much space should I leave betwee my fridge-freezer and the wall? Verified

To ensure a good ventilation it's best to leave at least 5cm of free space on both sides and the back of the fridge-freezer.

This was helpful (934) Read more

What do the stars on the freezer mean? Verified

The stars indicate the freezing capacity. 1 star indicates a freezing capacity down to -6ºC. This makes the freezer suitable for making ice cubes or storing previously frozen goods for up to two weeks. Fresh food cannot be frozen. 2 stars indicates a freezing capacity down to -12ºC. This makes the freezer suitable for storing previously frozen goods for up to two months. Fresh food cannot be frozen. 3 stars indicates a freezing capacity down to -18ºC. This makes the freezer suitable

This was helpful (720) Read more

How long does it take for my refrigerator to reach the set temperature after I turn it on? Verified

This depends on the size, age and model of the refrigerator. It may take several hours to 24 hours for the refrigerator to reach the set temperature. The process can be accelerated by placing non-perishable goods in the refrigerator. The temperature in the refrigerator cannot be measured properly by feeling the air inside. The best way to tell if the refrigerator has reached the set temperature is to place a glass of water in the refrigerator with a thermometer in it.

This was helpful (622) Read more

There is condensation in my refrigerator, why is that? Verified

There can be several causes. The door gasket can be defective, allowing outside air into the refrigerator. It's also possible that the refrigerator is not level, preventing the door from closing correctly. Another cause is a large difference between the temperature inside the refrigerator and outside while the door is being opened frequently.

This was helpful (525) Read more

There is mold on the rubber seals of my fridge-freezer, what should I do? Verified

The rubber seals are not actually inside the fridge-freezer and are therefore warmer. This allows bacteria to grow and mold to form. Clean the rubbers regularly to prevent this.

This was helpful (467) Read more

Can I put warm food or drinks in my fridge-freezer? Verified

Preferably not. The temperature in your fridge-freezer will rise, which negatively impacts the other items that are stored inside.

This was helpful (466) Read more

What is R-410A? Verified

R-410A is a cooling agent that is used in appliances that cool up to 0°C, like refrigerators and air conditioners. It is the replacement of older cooling agents and does not damage the ozon layer.

This was helpful (465) Read more