Home > Household appliances > Fridge-Freezers > Maytag Fridge-Freezers > Maytag MFD2561KES Fridge-Freezer

Manual Maytag MFD2561KES Fridge-Freezer

Need a manual for your Maytag MFD2561KES Fridge-Freezer? Below you can view and download the PDF manual for free in English. This product currently has 16 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Style 2

1. Create a service loop (minimum diameter of 2 ft [61 cm]) with

the copper tubing. Avoid kinks when coiling the copper

tubing.

2. Remove the plastic cap from water valve inlet port. Place a

compression nut and sleeve on the copper tubing.

3. Insert the end of the copper tubing into the water valve inlet

port. Shape tubing slightly so that the tubing feeds straight

into the port to avoid kinks.

4. Slide the compression nut over the sleeve and screw into the

water valve inlet port.

5. Using an adjustable wrench, hold the nut on the plastic water

line to keep it from moving. Then, with a second wrench turn

the compression nut on the copper tubing counterclockwise

to completely tighten. Do not overtighten.

6. Check connection by pulling on copper tubing. Attach copper

tubing to refrigerator cabinet with a “P” clamp. Turn on water

supply to refrigerator and check for leaks. Correct any leaks.

Complete the Installation

1. Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard

the first three batches of ice produced. Allow 3 days to

completely fill the ice container.

Refrigerator Door(s) and Drawer

TOOLS NEEDED: ⁵⁄₁₆", ³⁄₈", ¹⁄₄" hex-head socket wrench, a

#2 Phillips screwdriver, and a flat-blade screwdriver.

IMPORTANT:

■ Your refrigerator may have a standard reversible refrigerator

door (Style 1) with either a freezer door or freezer drawer, or

French doors (Style 2). Follow the instructions specific to the

door style of your model.

■ All graphics referenced in the following instructions are

included later in this section after “Final Steps.” The graphics

shown for the standard door (Style 1) are for a right-hand

swing refrigerator (hinges factory installed on the right).

■ If you only want to remove and replace the doors, see

“Remove Doors and Hinges” and “Replace Doors and

Hinges.”

■ Before you begin, turn the refrigerator control OFF, and

remove food and adjustable door or utility bins from the

doors.

Remove and Replace Refrigerator Door Handles

Style 1–Standard Door

Front Mount Handle

■ To remove the handle, remove the screw attaching the trim to

the upper end of the handle. Using a flat-blade screw driver

wrapped in masking tape, pry the trim piece from the lower

end of the handle. Then, remove the screws attaching the

handle to the door. See Front Mount graphic 2.

■ To replace handle, reverse directions.

Side Mount Handle

■ To remove the handle, remove the four screws attaching the

handle to the side of the door. See Side Mount graphic 2.

■ To replace the handle, align the holes in the handle with the

holes in the door. Then, insert a screw in the upper hole at

each end of the handle. Next, insert a screw in the lower

holes. Tighten the screws. See Side Mount graphic 2.

Style 2–French Doors

Metal Handles

■ Using a ³⁄₃₂" Allen wrench, loosen the two set screws located

on the side of each handle. Pull the handle straight out from

the door. Make sure you keep the screws for reattaching the

handles. See Metal Handle graphic 1.

■ To replace the handles, reverse the directions.

Plastic Handles

■ To remove the handle, grasp the lower part of the handle

firmly, slide the handle up and pull the handle straight out

from the door. See Plastic Handle graphic 1.

■ To replace the handle, position the handle so that the large

holes in the mounting clips are down and align the holes with

the door studs. Rotate the handle so that the mounting clips

are flat against the door and slide the handle down to

engage. See Plastic Handle graphic 1.

A. Plastic water tubing

B. Sleeve

C. Compression nut

D. Copper tubing

A. Plastic water line

B. Water valve inlet port

C. Compression nut

D. Copper tubing

E. “P” clamp

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Rating

Let us know what you think about the Maytag MFD2561KES Fridge-Freezer by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Maytag MFD2561KES Fridge-Freezer?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Maytag MFD2561KES Fridge-Freezer. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Maytag MFD2561KES Fridge-Freezer. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Maytag. They might be able to provide an original manual. Are you looking for the manual of your Maytag MFD2561KES Fridge-Freezer in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Maytag
Model	MFD2561KES
Category	Fridge-Freezers
File type	PDF
File size	5.61 MB

All manuals for Maytag Fridge-Freezers
More manuals of Fridge-Freezers

Frequently Asked Questions about Maytag MFD2561KES Fridge-Freezer

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

If I want my fridge-freezer to be colder, should I choose for a higher or lower setting? Verified

With most fridge-freezers a higher setting means the machine will cool harder. With a lower setting, the machine will cool less hard and the temperature in the fridge-freezer will be higher.

This was helpful (7495) Read more

Can I change the opening direction of the door of my fridge-freezer? Verified

Yes, nearly all standing fridge-freezers offer the option to place the door on the other side. How to do this can generally be found in the manual.

This was helpful (4048) Read more

What is the best temperature setting for a refrigerator? Verified

From a health perspective temperatures between 3℃ and 4℃ are the best. At these temperatures the growth of bacteria and mold is limited.

This was helpful (3317) Read more

The drain hole in my fridge-freezer is dirty/clogged, how do I clean it? Verified

There are special cleaning devices to do this, but it is also possible to remove blockage or dirt with a cotton swab. To keep the drain hole clean and prevent smells it is advisable to put a drop of chlorine bleach in the drain 4 times a year.

This was helpful (3025) Read more

How often should I defrost my freezer? Verified

For optimal use of the freezer it is best to defrost it once every 3-6 months. Ice on the inside of the freezer reduces the available space and increases the use of energy. The thawing process can be accelerated by placing hot water in the drawer or placing bowls of hot water in the freezer.

This was helpful (2423) Read more

My fridge-freezer makes a bubbling sound, is that normal? Verified

Modern fridge-freezers make use of an environmentally friendly cooling agent. During the cooling process this substance turns into a gas, which can cause a bubbling and/or hissing sound. This is perfectly normal.

This was helpful (2173) Read more

I bought a new fridge-freezer, can I turn it on immediately? Verified

No, the fridge-freezer needs to stand in an upright position for at least 4 hours before it can be turned on. This is because the coolant liquid needs to settle.

This was helpful (1459) Read more

Is it normal that water or ice drops are forming on the back wall of my fridge-freezer? Verified

Yes, this a completely normal phenomenom. The moisture that enters the fridge-freezer with warm air or products will settle on the coldest part, being the back wall. Because the back wall can reach temperatures below freezing, the drops will freeze from time to time. When the fridge-freezer is idle the drops will thaw and flow to the drain of the fridge-freezer.

This was helpful (1133) Read more

De door of my fridge-freezer will not close properly, why is that? Verified

The two most common causes are that the fridge-freezer is not level and that the door seal is damaged or has food remains on it. Make sure the fridge-freezer is level and check the door seal. Replace the seal if neccesary.

This was helpful (1001) Read more

How much space should I leave betwee my fridge-freezer and the wall? Verified

To ensure a good ventilation it's best to leave at least 5cm of free space on both sides and the back of the fridge-freezer.

This was helpful (934) Read more

What do the stars on the freezer mean? Verified

The stars indicate the freezing capacity. 1 star indicates a freezing capacity down to -6ºC. This makes the freezer suitable for making ice cubes or storing previously frozen goods for up to two weeks. Fresh food cannot be frozen. 2 stars indicates a freezing capacity down to -12ºC. This makes the freezer suitable for storing previously frozen goods for up to two months. Fresh food cannot be frozen. 3 stars indicates a freezing capacity down to -18ºC. This makes the freezer suitable

This was helpful (720) Read more

How long does it take for my refrigerator to reach the set temperature after I turn it on? Verified

This depends on the size, age and model of the refrigerator. It may take several hours to 24 hours for the refrigerator to reach the set temperature. The process can be accelerated by placing non-perishable goods in the refrigerator. The temperature in the refrigerator cannot be measured properly by feeling the air inside. The best way to tell if the refrigerator has reached the set temperature is to place a glass of water in the refrigerator with a thermometer in it.

This was helpful (622) Read more

There is condensation in my refrigerator, why is that? Verified

There can be several causes. The door gasket can be defective, allowing outside air into the refrigerator. It's also possible that the refrigerator is not level, preventing the door from closing correctly. Another cause is a large difference between the temperature inside the refrigerator and outside while the door is being opened frequently.

This was helpful (524) Read more

There is mold on the rubber seals of my fridge-freezer, what should I do? Verified

The rubber seals are not actually inside the fridge-freezer and are therefore warmer. This allows bacteria to grow and mold to form. Clean the rubbers regularly to prevent this.

This was helpful (467) Read more

Can I put warm food or drinks in my fridge-freezer? Verified

Preferably not. The temperature in your fridge-freezer will rise, which negatively impacts the other items that are stored inside.

This was helpful (466) Read more

What is R-410A? Verified

R-410A is a cooling agent that is used in appliances that cool up to 0°C, like refrigerators and air conditioners. It is the replacement of older cooling agents and does not damage the ozon layer.

This was helpful (465) Read more