Home > Home & Decoration > Lamps > Kichler Lamps > Kichler 3797CH Eileen Lamp

Manual Kichler 3797CH Eileen Lamp

Need a manual for your Kichler 3797CH Eileen Lamp? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Date Issued: 04/11/17 IS-3797-CB

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

CAUTION – RISK OF SHOCK –

Disconnect power at the main circuit breaker panel or main fuse

box before starting and during the installation.

CHAIN DROP

1) Screw loop to threaded pipe on top of ﬁxture.

2) Pass screws through holes from inside ﬁxture. Thread

threaded balls onto screws.

3) Turn off power.

4) Find the appropriate threaded holes on mounting strap. As-

semble mounting screws into threaded holes.

5) Attach mounting strap to outlet box. (Screws not provided).

Mounting strap can be adjusted to suit position of ﬁxture.

6) Grounding instructions: (See Illus. A or B).

A) On ﬁxtures where mounting strap is provided with a hole

and two raise dimples. Wrap ground wire from outlet box

around green ground screw, and thread into hole.

B) On ﬁxtures where a cupped washer is provided. Put

ground wire from outlet box under cupped washer and

green ground screw and thread screw into hole in mounting

strap.

If ﬁxture is provided with ground wire. Connect ﬁxture

ground wire to outlet box ground wire with wire connector,

(not provided) after following the above steps. Never con-

nect ground wire to black or white power supply wires.

7) Make wire connections (connectors not provided.) Refer-

ence chart below for correct connections and wire accord-

ingly.

8) Push ﬁxture to ceiling, carefully passing mounting screws

through holes in canopy.

9) Secure ﬁxture to ceiling with threaded balls.

10) Screw end of threaded pipe with hexnut already installed

into bottom of socket cluster.

11) Slip cupped washer over threaded pipe.

12) Raise glass up to ﬁxture carefully passing threaded pipe

through hole in glass. Secure glass in place with rubber

washer, ﬂat washer and hexnut.(DO NOT over tighten.)

13) Screw trim onto end of threaded pipe. (DO NOT over

tighten.)

GREEN GROUND

SCREW

CUPPED

WASHER

OUTLET BOX

GROUND

FIXTURE

GROUND

DIMPLES

WIRE CONNECTOR

OUTLET BOX

GROUND

GREEN GROUND

SCREW

FIXTURE

GROUND

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

*Parallel cord (round & smooth) *Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

CAUTION – RISK OF SHOCK –

Disconnect power at the main circuit breaker panel or main fuse

box before starting and during the installation.

SEMI-FLUSH MOUNT

1) Remove loop from top of canopy.

2) Remove threaded balls from canopy. DO NOT discard

threaded balls.

3) Turn off power.

4) Find the appropriate threaded holes on mounting strap. As-

semble mounting screws into threaded holes.

5) Attach mounting strap to outlet box. (Screws not provided).

Mounting strap can be adjusted to suit position of ﬁxture.

6) Grounding instructions: (See Illus. A or B).

A) On ﬁxtures where mounting strap is provided with a hole

and two raise dimples. Wrap ground wire from outlet box

around green ground screw, and thread into hole.

B) On ﬁxtures where a cupped washer is provided. Put

ground wire from outlet box under cupped washer and

green ground screw and thread screw into hole in mounting

strap.

If ﬁxture is provided with ground wire. Connect ﬁxture

ground wire to outlet box ground wire with wire connector,

(not provided) after following the above steps. Never con-

nect ground wire to black or white power supply wires.

7) Make wire connections (connectors not provided.) Refer-

ence chart below for correct connections and wire accord-

ingly.

8) Push ﬁxture to ceiling, carefully passing mounting screws

through holes.

9) Secure ﬁxture to ceiling with threaded balls.

10) Screw end of threaded pipe with hexnut already installed

into bottom of socket cluster.

11) Slip cupped washer over threaded pipe.

12) Raise glass up to ﬁxture carefully passing threaded pipe

through hole in glass. Secure glass in place with rubber

washer, ﬂat washer and hexnut.(DO NOT over tighten.)

13) Screw trim onto end of threaded pipe.

(DO NOT over tighten.)

GREEN GROUND

SCREW

CUPPED

WASHER

OUTLET BOX

GROUND

FIXTURE

GROUND

DIMPLES

WIRE CONNECTOR

OUTLET BOX

GROUND

GREEN GROUND

SCREW

FIXTURE

GROUND

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

*Parallel cord (round & smooth) *Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

MOUNTING STRAP

CANOPY

THREADED BALL

LOOP

SCREW FIXTURE

FIXTURE

THREADED PIPE

THREADED BALL

GLASS

TRIM

HEXNUT

RUBBER WASHER

FLAT WASHER

CUPPED

WASHER

SEE OTHER SIDE FOR CANADIAN FRENCH TRANSLATIONS.

VOIR L’AUTRE CÔTÉ POUR LES CANADIENS TRADUCTIONS EN FRANÇAIS.

Rating

Let us know what you think about the Kichler 3797CH Eileen Lamp by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Kichler 3797CH Eileen Lamp?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Kichler 3797CH Eileen Lamp. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Kichler 3797CH Eileen Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kichler. They might be able to provide an original manual. Are you looking for the manual of your Kichler 3797CH Eileen Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Kichler
Model	3797CH Eileen
Category	Lamps
File type	PDF
File size	0.26 MB

All manuals for Kichler Lamps
More manuals of Lamps

Frequently Asked Questions about Kichler 3797CH Eileen Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Is all LED lighting dimmable? Verified

No, not all LED lights are dimmable. This is indicated on the packaging or the light itself.

This was helpful (462) Read more

I put a new light in my lamp but it won't turn on, why is that? Verified

Some lamps are made for light sources of a specific wattage. When a light source is inserted that requires a higher wattage than the lamp can provide, the light may not turn on. If the lamp delivers a much higher wattage than what the light source is made for, the light source can burn out.

This was helpful (315) Read more

Why is the colour of light important? Verified

There generally are two kinds of light, warm light and cold light. Cold light keeps you sharp and awake. Warm light has a relaxing effect. The warmth of the light is measured in Kelvin and is indicated on the packaging of the lamp itself.

This was helpful (255) Read more

What is lumen? Verified

Lumen is a measuring unit for the total amount of visible light emitted by a source.

This was helpful (190) Read more

What screw bases exist? Verified

Worldwide there many types of sockets, but most used are those based on the Edison screw, indicated with the letter E. In most countries screw bases E27 and E14 are standard. In the United States E26, E17, E12 and E10 are standard.

This was helpful (142) Read more

What do watts say about my lamp? Verified

Watt is a measuring unit for electricity consumption. Lamps that produce more light, generally use more Watt, but for comparing light output you should always use lumen.

This was helpful (113) Read more