Manual Kichler 15295AZ In Lamp

Manual

CAUTION

WHEN INSTALLING KICHLER

®

LANDSCAPE LIGHTING

(LINE VOLTAGE OR LOW VOLTAGE), CARE SHOULD BE

TAKEN TO KEEP CLEAR OF POTENTIALLY COMBUS-

TIBLE MATERIALS.

WHEN MAINTAINING THE FIXTURES, BE SURE TO RE-

MOVE LEAVES, PINE NEEDLES, GRASS CLIPPINGS,

MULCH, OR ANY DEBRIS THAT HAS ACCUMULATED ON

THE LIGHT BULB, LENS, OR BODY OF THE FIXTURE.

ASSEMBLY AND INSTALLATION

• Installation should be done by a qualied electrician in accordance with

local, state and national electric codes.

• Excavation for conduit and conduit runs should be completed before proceeding.

• If installing xture in concrete using Kichler pour kit 15608AZ (sold separately)

follow directions included with pour kit and skip steps 3,5 and 6.

1) Turn off power.

2) Remove retaining ring, glass and yoke assembly.

3) At desired location, dig hole approximately 3” larger in diameter and

depth then well light.

4) Attach conduit to bottom of well light. To avoid water from entering well

light, thread sealant should be used. NOTE: Bottom of well light has two

holes for connection of conduit. Hole not being used should be plugged

using plug provided.

5) Fill bottom of hole with approximately 3” of pea gravel or equivalent

granular material. Top edge of well light should be at or slightly above

nish grade. Adjust by adding or removing material.

6) Back ll area between well light and hole with pea gravel or equivalent

granular material.

7) Completely seal conduit connections inside well light using provided gel

encapsulate.

8) Connect supply wires to socket wires (connectors not provided).

Reference chart for correct connections and wire accordingly.

9) Adjust angle for bulb by loosening wing nuts inside yoke assembly and

adjust bottom end of yoke. Once at desired angle tighten wing nuts.

10) Slip yoke assembly into well light and secure in place with screws.

11) Insert recommended lamp. Keep bare hands from touching glass of

lamp. Oil from skin create excessive heating of lamp resulting in shorter

lamp life.

12) Insure that all gasket seating surfaces and screw holes are free and

clear of debris. If screw holes are not clear blow debris out or clear with

#10-32 tap.

13) Slip glass with gasket into well light.

14) Slip screws previously removed in step 2 through holes in retaining ring.

15) Align screws with holes in well light and tighten using an alternating

torque sequence at 20-30 inch-lbs. (SEE ILLUST. – Numbers indicate

order in which to tighten screws.)

For warranty information please visit: http://www.landscapelighting.com/portal/warranty_page

Para informacion de la garantia por favor visite: www.landscapelighting.com/portal/warranty_page

SCREW

RETAINING RING

GLASS

YOKE ASSEMBLY

1

8

4

5

3

7

2

6

Date Issued: 12/2/11

IS-15295-US

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Kichler 15295AZ In Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kichler. They might be able to provide an original manual. Are you looking for the manual of your Kichler 15295AZ In Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Kichler Lamps
More manuals of Lamps

Frequently Asked Questions about Kichler 15295AZ In Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.