Home > Telecommunication > Mobile Phones > ZTE Mobile Phones > ZTE AC30 Mobile Phone

Manual ZTE AC30 Mobile Phone

Need a manual for your ZTE AC30 Mobile Phone? Below you can view and download the PDF manual for free in English. This product currently has 15 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Indicator Status Description

Battery

indication

RED glittering Please charge

RED bright Voltage of battery is low

Green glittering Charging

Green bright Voltage of battery is high

LED off No battery.

Signal

strength

indication

Red bright

ERROR or NO signal or NO

network service or NO SIM

GREEN glittering Signal is ok

Green bright Signal is good

LED off Low power mode

Wi-Fi

indication

LED off

WIFI is inactive or low power

mode

BLUE bright WPS is active

Blue bright Wi-Fi is active

Network

indication

RED glittering 2G Modem data transferring

RED bright Register on 2G network

GREEN glittering 3G Modem data transferring

GREEN bright Register on 3G network

LED off

ERROR or NO signal or NO

network service or NO SIM

Notes:

* The battery LED will be GREEN bright once the battery is fully

charged when power on.

* The battery LED will be turn off once the battery is fully charged

when power off.

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China

Postcode: 518057 Tel: +86-755-26779999

URL: http://www.zte.com.cn E-mail: [email protected]

ZTE AC30

Quick Start Guide

2 4 5 6 73 8

LEGAL INFORMATION

No part of this publication may be excerpted, reproduced, translated

or utilized in any form or by any means, electronic or mechanical,

including photocopying and microfilm, without the prior written

permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to

make modications on print errors or update specications without prior

notice.

Version No.: R1.0

Edition Time: July-2011

Manual No.: 079584503492

Introduction

ZTE AC30 is a 3G/2G mobile hotspot device, working in CDMA/1X/

EVDO network. The client devices could connect to it via USB or Wi-Fi

interface. The device supports data and SMS services, enabling you to

communicate anytime and anywhere.

This quick guide provides instructions on how to install and get started

with the product. For information about connection of services, please

consult your service provider.

Specication

Data Service

CDMA EVDO: DL 3.1 Mbps

UL 1.8 Mbps

Weight 80 g

Dimensions (W×H×D): 99.7 mm*53.7 mm*13.9 mm

Power Adapter +5V (DC), 0.7 A Max

Battery 1500 mAh

*Standby time 100 hours

*Working time 4 hours

Operate system

Windows 7, Windows Vista, Windows XP (SP2 or

later), MAC 10.4 or later

Web Browser

Windows 7, Windows Vista (64bit or 32bit),

Windows XP (SP2 and later), MAC (10.4 later)

Notes:

The device’s standby and working time are only for your reference, and

based on ideal working environment.

Switching On/Off Your Device

Press and hold the Power Key for three seconds to switch the device

on or off.

When you turn the device on, the signal icon is lit.

Charging Your Device

Notes:

• Charge at least 5 hours to ensure a full initial charge.

• Charging is only possible within a temperature range of 0°C to 45°C.

1. Connect the Mini USB end of the AC wall charger to the Mini USB

port on the device.

2. Plug the other end of the AC wall charger into the appropriate

electrical outlet.

Working Mode

Your device supports three working modes. For the client, we only use

PC or laptop as the example in this document.

USB Mode: Connect to the device with the USB cable.

Wi-Fi Mode: Connect to the device via Wi-Fi.

Mixed Mode: Connect to the device with the above two connection

methods.

Notes:

If you want to connect to the Internet by using Wi-Fi mode, make sure

that the client supports the Wi-Fi function.

The following picture is the application example. All of the client devices

can surf on the Internet at the same time.

Getting to Know Your Device

The following gure shows the appearance of the device, it is only for

your reference. The actual device may be different.

Interface and Buttons

1. Power

Hold the Power button to switch on/off the

device

2. Indicator It indicates your device’s status.

3. Charger/USB port

•

Charge your device

•

Connect the client to your device via USB

cable

Notes:

* Continuously press the Power button ve times within 5 seconds,

the device will restart automatically and restore to the factory

default settings.

LED Indicator

It indicates the status of your device.

Hardware Installation

Inserting (U)SIM Card and Battery

1. Use the thumb catch at the bottom of the device to open the battery

cover.

2. Insert (U)SIM Card into the slot.

Warning:

Please power off the device and remove the external power adapter

before removing or inserting the (U)SIM card, if not, the device or (U)SIM

card may be damaged.

3. Insert the battery as shown with the contacts located against the

gold springs.

4. Press the battery down ush into the case.

5. Once the battery is secure, place the battery cover back on the

device until it locks into place.

Establishing a Connection Between Your Device and the Client

Via USB Cable

1. Connect your device and the client with the USB cable.

2. Power on your device.

3. Follow the system prompts to complete the software installation:

Notes:

• If the system does not launch installation automatically, you can run

the installation program in path of My Computer > Mobile Hotspot

> AutoRun.exe.

• The driver of your device will be installed at the same time.

4. After the installation, the system will create a shortcut icon on

your desktop and a Mobile Hotspot program group in the Start

> Programs menu. The connection between your device and the

client will be established successfully a moment later.

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initialize,

and then Wi-Fi LED is blinking.

2. Use your normal Wi-Fi application on the client to search the

available wireless network.

Notes:

You need to check your Wireless

Network Connection. Set the

client to obtain an IP address

automatically in the Internet

protocol (TCP/IP) properties, and

the client will get an IP address

like “192.168.0.100”.

3. Sele c t th e SSID of y o ur

d e v i c e , a n d th e n c l i c k

Connect.

Rating

Let us know what you think about the ZTE AC30 Mobile Phone by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the ZTE AC30 Mobile Phone?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the ZTE AC30 Mobile Phone. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your ZTE AC30 Mobile Phone. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact ZTE. They might be able to provide an original manual. Are you looking for the manual of your ZTE AC30 Mobile Phone in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	ZTE
Model	AC30
Category	Mobile Phones
File type	PDF
File size	1.13 MB

All manuals for ZTE Mobile Phones
More manuals of Mobile Phones

Frequently Asked Questions about ZTE AC30 Mobile Phone

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

My SIM card doesn't fit my mobile phone, why is that? Verified

There are several SIM card sizes, regular, micro and nano. It is possible to use an adapter or to have the SIM card made smaller.

This was helpful (1350) Read more

Can I use my mobile phone while charging it? Verified

Yes, you can use your mobiele phone while charging it. The charging process will go slower when you do this.

This was helpful (1233) Read more

What is a PUK code? Verified

PUK stands for Personal Unblocking Code and is needed to unblock your phone after entering an incorrect PIN code three times. If the PUK is no longer available it can often be requested from the provider.

This was helpful (644) Read more

My phone is in good condition, but when I call people the have trouble hearing me, why is that? Verified

It is possible that dirt has amassed in the grid of the microphone, muting the sound. The best way to clean this is with compressed air. When in doubt, have this done by a professional.

This was helpful (550) Read more

Is it necessary to drain my lithium-ion battery before recharging it again? Verified

No, this is not necessary. With older batteries this was the case. Lithium-ion batteries can be charged after use and be taken off the charger when needed.

This was helpful (308) Read more

When I connect my device to the charger it charges bad or not at all, why is that? Verified

It is possible that dirt has amassed in the opening where the charger is connected, preventing it from making proper contact. The best way to clean this is with compressed air. When in doubt, have this done by a professional.

This was helpful (295) Read more

What does IMEI stand for? Verified

IMEI stands for International Mobile Equipment Identity and is a (often) unique number that is used to identify mobile devices such as tablets and smartphones and protect them against theft.

This was helpful (273) Read more

When I connect a headphone to my device it doesn't work properly, what can I do? Verified

It is possible that dirt has amassed in the opening where the headphone is connected, preventing it from making proper contact. The best way to clean this is with compressed air. When in doubt, have this done by a professional.

This was helpful (240) Read more

The battery of my phone runs out quickly when I am outside, why is that? Verified

Lithium-ion batteries can't handle low temperatures. If the outside temperatures are close to freezing, the battery will get depleted faster than normal, even without using the phone. When the phone has returned to room temperature, it will probably show a battery percentage close to what it was.

This was helpful (227) Read more

Does bluetooth work through walls and ceilings? Verified

A bluetooth signal will work through walls and ceiling, unless these are made from metal. Depending on the thickness and the material of the wall the signal can lose in strength.

This was helpful (216) Read more

What can I best use to clean the screen of my mobile device? Verified

It's best to use a microfiber cloth, possibly with a specialized detergent. Never use kitchen towels or other paper cloths, these will leave scratches!

This was helpful (205) Read more

Under what conditions will my lithium-ion battery function optimally? Verified

Lithium-ion batteries function optimally at a temperature between 5 and 45 degrees Celcius. With very cold or warm weather you may notice that the battery will drain quicker. Charging is not recommended at temperatures lower than 5 or higher than 45 degrees Celcius.

This was helpful (201) Read more

What is the best way to store a lithium-ion battery for a long period? Verified

The best way to store a lithium-ion battery is at a temperature between 5 and 45 degrees Celcius. It's also a good idea make sure the battery is about 67% charged before it is stored away.

This was helpful (200) Read more