Manual Whirlpool AWOE 1040 Washing Machine

Manual

5019 301 06653

Whirlpool is a registered trademark of Whirlpool USA

Load the laundry, close the door and turn the programme selector

to the desired programme; the “Start/Pause” indicator blinks.

The temperature and spin speed shown on the display can

be altered by pressing the “Temperature” key or the

“Spin” key . If you do not use the “Dosing Aid” , add

detergent now.

If the combination programme/option or option/option is not

possible, the indicator switches off automatically and a signal

sounds. To activate options around the display, just press the key

until the relevant symbol on the display lights up.

“Colours 15°” button

Saves energy used for water heating while maintaining a good

wash result.

Supports colour maintenance when washing coloured laundry.

Recommendable for lightly soiled laundry without stains.

Make sure that your detergent is suitable for cold wash

temperatures (15 or 20 °C).

Not selectable for Cotton 70 - 95°C.

“Rapid” button

Enables quicker washing by shortening the programme duration.

Recommendable for only lightly soiled laundry.

Not selectable for Cotton 70 - 95°C.

“Prewash” key

Adds a prewash cycle to the wash programme selected; prolongs

the programme by about a quarter of an hour.

Recommended for heavily soiled laundry (e.g. containing sand or

granular dirt).

“Intensive rinse” key

More water is added and rinse cycle is prolonged.

Particularly suitable for areas with very soft water or for washing

baby linen, and helps people with allergies.

“Soil level” key

Adapts the programme duration to the soil level of your laundry

(small = lightly, medium = normally, big = heavily soiled). Also

influences the detergent quantity recommendation when using

the “Dosing Aid” button.

Not all soil levels are selectable for each programme.

“Spin” key (incl. “Rinse Hold” )

Press the key to change the predefined spin speed. If you select

spin speed “0”, the final spinning is cancelled and the water is

drained out only. However, intermediate spin phases remain

during the rinse.

If you select “Rinse hold” , the laundry remains in the last

rinse water without progressing to the final spin cycle, to avoid

creasing and prevent colours from changing. To activate the

“Rinse hold”, press the “Spin” key repeatedly until the “Rinse

hold” symbol on the display lights up.

- The programme stops to “Rinse hold” when on the

display blinks; the “Start/Pause” indicator blinks as well.

- To terminate the “Rinse hold” by spinning the laundry, press

“Start/Pause” - the laundry will be spun with the default spin

speed. You can also select another spin speed with the “Spin”

button before you start the spin cycle with “Start/Pause”.

- To terminate the “Rinse hold” by draining the water without

spinning, press the “Spin” button until spin speed “0” appears

on the display; then press “Start/Pause” to start the draining.

- Do not leave the laundry to soak for too long in the “Rinse

hold” (especially silk!).

You can postpone your programme to complete at a later time:

press the key to select in how many hours the programme shall

be finished. Thus, it allows you to have your laundry ready at a

particular time and to profit from more favourable energy rates

during the night, for example.

• The time until the “Cycle end” can be selected in full hour time

segments (1 to 24 h). When you press the key, the shortest

possible time will be displayed; keep on pressing the key to

loop through all the available times. To remove it again, keep

on pressing the key until you see the value “0:00”.

• When you have selected the desired time until the “Cycle end”,

press “Start/Pause” - the countdown will begin.

CONSUMPTION DATA

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme Duration (hours : minutes)

without “Rapid” with “Rapid”

Mixed 40 6.0 65 0.65 1:00 —

Cotton 95 10.0 90** 2.80 2:30 —

Cotton 60 10.0 70 1.70 2:20 1:35

Cotton 40 10.0 90 0.95 2:05 1:15

Easy Care (Synthetics) 60 3.5 48** 0.95 1:35 1:10

Easy Care (Synthetics) 40 3.5 45 0.55 1:20 0:55

Delicates 40 2.5 60 0.65 0:50 —

Wool/Handwash 40 2.0 45 0.60 0:40 —

White 40 10.0 85 1.00 2:20 —

Light colours 40 6.0 70 0.50 1:20 —

Dark 40 6.0 49 0.60 1:40 1:15

EcoCotton* 60 10.0 66 1.00 4:00 —

EcoCotton* 60 5.0 43 0.65 3:30*** —

EcoCotton* 40 5.0 43 0.55 3:00*** —

AquaEco 40 3.0 19 0.45 1:00 —

Speed 15 30 3.0 30 0.20 0:15 —

Big Items 40 3.0 70 0.75 1:30 —

Bedlinen 60 3.5 60 1.30 2:00 —

Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual

water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx.

15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water

supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature.

Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options

or changing the spin speed will also change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also

“Troubleshooting Guide” in your Instructions for Use).

** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.

*** Automatic adaptation of programme duration after detection of wash load.

* Reference programmes for Energy Label.

LOAD LAUNDRY AND SELECT PROGRAMME

SELECT ANY DESIRED OPTION

SET CYCLE END

• During the countdown, you can still modify the programme

setting (select or deselect options, change spin speed etc.). If

the modifications prolong the programme duration so that it

overruns the originally set time until the “Cycle end”, the

programme will start immediately.

• Sometimes the programme may finish before the selected

time until the “Cycle end” has expired (e.g. for small loads). In

this case, the washing machine will tumble the laundry

regularly to keep it fresh, until the selected “Cycle end” time

has expired. During tumbling, the display will show an

animation. The tumbling phase can be stopped at any time

either by pressing any button or by rotating the programme

selector; the animation will stop and the door will unlock in

about 1 minute as indicated on the display.

With the “Dosing Aid”, you can make your washing machine

indicate you the recommended detergent quantity for your wash

load, depending on the soil level selected and the size of the load.

• Helps to save detergent and protect the environment and also

sensitive skin by avoiding detergent overdosing.

• Before you use this function, you must adapt the washing

machine to the dosing amounts which are recommended for

the detergents you use. Also check if your region’s water

hardness corresponds with the water hardness level “soft” of

your washing machine - if not adapt it.

• Select programme and options and set cycle end before

activating the “Dosing Aid”.

For any details, refer to the separate “Dosing Aid” Instructions for Use.

If there is a programme setting which you use frequently, the

appliance offers the possibility to save one setting for each

programme so that it can be used again by just pressing the

“Favourites” key .

• Select the desired programme, temperature, spin speed and

option(s), press and hold the “Favourites” key for at least 3

seconds. The heart symbol on the display shortly blinks

and then lights up - the programme setting is saved.

Next time you want to use your individual programme setting,

select the programme, shortly press the “Favourites” key

and start by pressing “Start (Pause)” .

If you want to replace the saved programme setting by another one:

• Proceed as already described above - the previously saved

programme setting will be replaced by the new one.

Before starting a programme, the indicator lights to show that the

door can be opened. As long as a wash programme is running, the

door remains locked and must on no account be forced open. In

case you have an urgent need to open it during a running

programme, refer to “Reset a running programme before the end”.

The “Eco monitor” gives you a rough feedback about the power

consumption of the programme setting you selected.

As soon as you turn the programme selector to any programme,

the “Eco monitor” is on.

The indicator on the left is to show that the “Eco monitor” is active.

The four indicators next to it show the degree of consumption: the

less power your programme setting is forecasted to consume, the

less indicators will light up. This depends on the programme,

temperature and options selected, and also on the size of the wash

load. For that reason, the forecasted degree of power consumption

may adapt when the washing machine detects the wash load.

When you select a programme, the drum light will slowly go on

to assure a good visibility during laundry loading.

After starting your programme with “Start/Pause”, the drum

light will fade on and off while the washing machine detects the

laundry load. Subsequently, it will go off.

When the programme is finished, the light goes on again for a short

time; afterwards it will go off automatically to save energy. If you

want to switch it on again for unloading your laundry, just press any

option button or turn the programme selector (but not to “Off/O”).

The drum light will blink fast when a failure is detected.

Open the tap and press the “Start/Pause” button . The “Start/

Pause” indicator lights up. The display shows the remaining

programme time. During detection of the laundry load and new

calculation of the programme time, an animation appears on the display.

Prevents children from starting a wash cycle or changing the

settings of a running programme. Cannot be activated or

deactivated when the programme selector is in the “Off/O”

position. To activate the child lock:

• Turn the programme selector to a programme position, or run

a programme as usual.

• Press and hold the 2 buttons marked with the key symbol

simultaneously for a few seconds. A key symbol will

appear on the display to indicate that the child lock is active.

Any time you try to change a programme setting with active child

lock, a signal will sound; it cannot be changed anymore. The only

change possible is to switch the washer off by turning the programme

selector to the “Off/O” position. To deactivate the child lock, proceed

in the same way as for activating it (signal will sound twice).

Press and hold the marked buttons simultaneously for a few

seconds to switch off the peep sound of the buttons and at the

end of the programme; a long signal sounds. To switch it on again,

proceed in the same way; a short signal sounds twice.

If one of the failure indicators lights up, or in case of any malfunction,

consult the “Troubleshooting Guide” in your Instructions for Use.

Spin speed on display blinks: Unbalance during spinning.

• The “Programme finished” indicator lights up. The display

shows “End”.

• Turn the programme selector to the “Off/O” position.

21.Close the water tap.

22.Open the door and unload the machine.

23.Leave the door ajar to allow the drum to dry.

The symbol will light up at the end of the programme if you used

too much detergent. Use less detergent next time.

1.Press the “Start/Pause” button to pause the programme.

The indicator blinks.

2.Select the new programme, temperature, any options and

another spin speed if you want.

3.Press the “Start/Pause” button again. The new

programme continues at the same position where the

previous programme was interrupted. Do not add detergent

for this programme.

The “Reset/Drain” button cancels a programme before the end.

• Press and hold the “Reset/Drain” button for a few seconds;

an animation appears on the display. The water is drained out; it

may last some time until you can open the door.

DETERGENT DOSING RECOMMENDATION

SAVE YOUR FAVOURITE PROGRAMMES

“DOOR OPEN” INDICATOR

ECO MONITOR

DRUM LIGHT

PROGRAMME START

CHILD LOCK

SOUND OFF

FAILURE INDICATORS

PROGRAMME END

DETERGENT OVERDOSAGE INDICATOR

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

RESET A RUNNING PROGRAMME BEFORE

THE END

- the sensor technology adapts water, energy and programme duration to the size of your wash load

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Whirlpool AWOE 1040 Washing Machine. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Whirlpool. They might be able to provide an original manual. Are you looking for the manual of your Whirlpool AWOE 1040 Washing Machine in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Whirlpool Washing Machines
More manuals of Washing Machines

Frequently Asked Questions about Whirlpool AWOE 1040 Washing Machine

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Whirlpool AWE 9633 Washing Machine

Manual

Whirlpool FFB 8258 SBV SP Washing Machine

Manual

Whirlpool FFD 9469 BV EE Washing Machine

Manual

Whirlpool WTW7120HW Washing Machine

Manual

Whirlpool FFB 7259 WV EE Washing Machine

Manual

Whirlpool TDLR 65241BS BE Washing Machine

Manual

Whirlpool TDLR 6251BS FN Washing Machine

Manual

Whirlpool FFB 8258 WV EE Washing Machine

Related categories