Manual Whirlpool AWCH 6522 Washing Machine

Manual

1.

PREPARATION OF THE WASH CYCLE

Load the machine, close the drum doors and check that

they are properly locked.

2. Add detergent and eventual additives as described on

the front page and in your Instructions for Use.

3. Close the lid.

4. Turn the programme selector to the desired

programme and temperature. The lamp next to the

“Start/Pause” button blinks. The indication lamp of

the predefined spin speed lights up. If you do not start

the programe soon after having made your choice,

the washing machine will switch off automatically after

about a quarter of an hour. Switch on the washing

machine again by turning the programe selector back to

“O” and then to the desired programe.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective

indication lights up. When the combination of programme

and additional option(s) is not possible, the indication lights

switch off automatically. Unsuitable combinations of options

are deselected automatically.

“Colours 15°” button

• Saves energy used for water heating while maintaining a

good wash result.

• Supports colour maintenance when washing coloured

laundry.

• Recommendable for lightly soiled laundry without stains.

• Make sure that your detergent is suitable for cold wash

temperatures.

• Not selectable for Cotton 95°C.

“Fresh care” button

• Select this option if you cannot unload the laundry

soon after programme end, or if you tend to forget the

laundry in your washing machine. It will help to keep

your laundry fresh.

• The washing machine will start to tumble the laundry

periodically after programme end.

• The light of the “Fresh care” button will blink while

this function is active, and the display will show an

animation.

• The periodic tumbling will last up to approximately

6 hours after the end of your wash programme, and

you can stop it at any time by pressing the “Fresh care”

button. It will last a while until you can open the door.

• After the “Fresh care” period has run out, the display

indicates “End”.

“Rapid” button

• Enables quicker washing by shortening the programme

duration.

• Recommendable for small loads or only lightly soiled

laundry.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular

dirt). Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when

activating the Prewash option.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very

soft water, washing baby linen and helping people with

allergies.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during the

rinse. The water is drained out only.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently,

the appliance offers the possibility to save one setting for

each programme so that it can be used again by just pushing

one button.

• Select the desired programme, temperature, spin speed

and option(s), push and hold the “Favourites” button

for at least 3 seconds. The lamp next to “Favourites”

shortly flashes and then lights up - the programme

settings is saved.

Next time you want to use your individual programme

settings, select the programme, push the “Favourites”

button and start by pushing “Start/Pause”.

If you want to replace the saved programme setting

by another one:

• Select programme temperature, spin speed and options

as desired and then press and hold the “Favourites”

button for at least 3 seconds.The previously saved

programme setting will be replaced by the new one.

START DELAY

The “Start delay” button allows the user to run the machine

at his convenience, for example at night when electricity is

cheaper.

• Do not use liquid detergent when activating this function.

• Select programme, spin speed and options.

• Press the “Start delay” button several times to select a

delay time by 1 to 24 hours.

• Start the programme (see “Programme Start”). The

indication lamp over the “Start delay” button lights up

and goes off when the programme starts.

• Once having pressed the “Start/Pause” button,

the countdown of the time delay begins. The time

delay indication on the display disappears when the

programme starts and is replaced by the remaining time.

• After the “Start/Pause” button has been pressed,

the number of hours preselected can be reduced by

pressing again the “Start delay” button.

To cancel the “Start delay”

..before you press the “Start/Pause” button:

• Turn the programme selector to another position or

press the “Reset/Drain” button.

..after having pressed the “Start/Pause” button:

• Press the “Reset/Drain” button for at least 3 second.

The start delay indicator light goes off.

PROGRAMME START

Open the tap and press the “Start/Pause” button. The

indication lamp next to the “Start/Pause” button lights up.

The display shows the remaining programme time.

Due to variations in load and temperature of inlet

water, the remaining time is newly calculated in certain

programme phases. If this is the case, an animation

appears on the time display.

“LID OPEN” INDICATION

Before starting and after end of a programme, the lamp

lights to show the the lid can be opened. As long as a wash

programme is running, the lid remains locked and must

on no account be forced open. In case you have an urgent

need to open it during a running programme, refer to

“Cancel a running programme before the end”.

CHILD LOCK BUTTONS

You can lock the buttons of the control panel against

improper use (e.g. by children).

• Press both of the child lock buttons simultaneously and

hold them for at least 3 seconds. The key symbol on the

display lights up.

• To unlock the buttons again: proceed in the same way.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the

“Troubleshooting Guide” in your Instructions for Use.

“Water tap closed”:

No or not sufficient inlet water.

“Service”:

Failure or malfunction of an electrical component.

“Clean pump”:

Waste water is not pumped out.

Spin speed on display blinks: unbalance during spinning

•

PROGRAMME END

The “Lid open” indicator lights up, and the display

shows “End”. After about a quarter of an hour, the

washing machine will switch off completely to save

energy.

1. Turn the programme selector to the “O” position.

2. Close the water tap.

3. Open lid and drum and unload the machine.

4. Leave the lid open for some time to allow the interior of

the machine to dry.

•

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

Press the “Start/Pause” button to pause the

programme. The light blinks.

• Select the new programme, temperature, any options

and another spin speed if you want.

• Press the “Start/Pause” button again. The new

programme continues at the same position where the

previous programme was interrupted. Do not add

detergent for this programme.

CANCEL A RUNNING PROGRAMME

BEFORE THE END

The “Reset/Drain” button cancels a programme before

the end.

• Press the “Reset/Drain” button for at least 3 seconds.

Any existing water is drained out before the door can

be opened.

CONSUMPTION DATA

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect

to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the

default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also

“Troubleshooting Guide” in your Instructions for Use).

* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

** Standard Cotton programme and basis for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.

*** After programme and spinning with maximum selectable spin speed, in default programme setting.

Power consumption in off-mode 0.11 W / in left-on mode 0.11 W

- the sensor technology adapts water, energy and programme duration to your wash load.

Programme

Tempe-

rature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

without “Rapid”

Approx. Programme Duration

(hrs : min)

Approx. remaining

moisture content (%)***

without “Rapid” with “Rapid”

1000 rpm 1200 rpm

Cotton 95 6.0 55* 1.90 2:00 1:50

64 57

Cotton 60 6.0 48 1.14 2:30 1:45

Cotton 40 6.0 61 0.97 3:00 1:30

Cotton 30 6.0 61 0.52 3:00 1:30

Synthetics 60 3.0 54* 0.89 2:05 1:14

47 40

Synthetics 40 3.0 50 0.56 1:50 0:59

Delicates 30 1.5 50 0.50 0:45 –

Daily load 40 3.0 40 0.45 1:00 – 68 61

Colours 40 4.0 70 0.55 1:20 1:00

Wool cold 1.0 40 0.10 0:35 -

eCotton **

60 6.0 46 0.78 3:30 –

62 53

eCotton **

60 3.0 32 0.71 2:45 –

eCotton **

40 3.0 32 0.53 2:00 –

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Whirlpool AWCH 6522 Washing Machine. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Whirlpool. They might be able to provide an original manual. Are you looking for the manual of your Whirlpool AWCH 6522 Washing Machine in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Whirlpool Washing Machines
More manuals of Washing Machines

Frequently Asked Questions about Whirlpool AWCH 6522 Washing Machine

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Whirlpool FFB 10658 BEV F Washing Machine

Manual

Whirlpool W8 W946SR SPT Washing Machine

Manual

Whirlpool BI WMWG 81485 UK Washing Machine

Manual

Whirlpool FFD 11469E BCV BE Washing Machine

Manual

Whirlpool W8 W946WR UK Washing Machine

Manual

Whirlpool TDLR 6240SS EU/N Washing Machine

Manual

Whirlpool WTW6157PW Washing Machine

Manual

Whirlpool Arizona 1200 Washing Machine

Related categories