Manual Toshiba TDP-T98 Projector

Manual

23

Operations

22

1

Turn on the power.

Tu rn on the power by following the instructions in “Turning the power on”

p.21

.

2

Select the language and the lamp power (When using the

first time).

When the projector is used for the first time after purchase, menu for language and

lamp power selection and configuration is displayed in English. (If the screen is out of

focus, adjust it according to the step

6

.)

q Use the or button to select the

desired language and press the

button.

Message for setup confirmation is displayed in a

selected language.

Then, the menu for lamp power selection and

configuration is displayed. It is automatically set as

Standard. To change the setting, follow the step w.

w Using the or button, select Low or

Standard for the lamp power (menu item)

and press the

button.

The lamp power, if selected, will be toggled without

pressing the

button. The display automatically

disappears in a few seconds.

Notes

• When the projector is turned on the next time, the Language and Lamp power

menus do not appear upon startup. However, if “Reset all” is executed from the

Default setting menu

p.31

, the Language and Lamp power menus will be

displayed the next time when the power is turned on.

• The language can also be set via the Display setting menu

p.30

and Lamp power

via the Default setting menu

p.31

.

• This owner’s manual assumes that English has been selected.

3

Activate the connected device.

Tu rn on and start the connected device such as a computer.

4

Press the INPUT button.

An image of the connected equipment is projected.

Each time you press the INPUT button, it switches to the input of the connected

equipment.

Basic operations

Notes

• When [Auto input search] is set to [On] in the default setting menu

p.31

, the image of

the equipment which is connected and turned on is projected.

•Moving pictures generated with the DVD software for computers may appear unnatural if

it is projected with this projector, but it is not a malfunction.

English

French

German

Italian

Spanish

Portuguese

Russian

Swedish

Tur kish

Japanese

Chinese (simplified)

Chinese (traditional)

Korean

Notes

• The start-up screen will disappear after a moment. You can dismiss the start-up screen

before this by performing any operation. You can also configure the start-up screen not to

appear via the Display setting menu

p.30

.

• The first time you use the projector after purchase, after the start-up screen disappears,

the Language menu is displayed

p.23

.

■ Turning the power off

1

Press the ON/STANDBY button.

A message appears on the screen, confirming that you wish to shut off the power. This

message will disappear after a moment. (This operation is no longer valid after the

message disappears.)

2

Press the ON/STANDBY button again.

The screen turns off, but the internal cooling fan continues to operate for a short while.

Then, the projector goes into standby mode.

When cooling lamp During internal cooling After cooling complete

A B C

(Orange) (Orange)

(Green) (Green)

(Off)

(Orange)

Flashing

(Green)

(Off)

(Off)

A

During cooling, the LAMP indicator flashes. In this state, the power cannot be

turned back on.

B

After the LAMP indicator goes off, the cooling fan continues to operate for a

short while, in order to expel excess internal heat. If you are in a hurry, there is

no problem with unplugging the power cord or turning off the main power switch

in this state.

C

In standby mode

Note

• The projector consumes about 12W of power in standby. We recommend that you unplug

the power cord or turn off the main power switch if you will not be using the projector for

an extended period.

PRECAUTION

• If the power cord is unplugged before cooling is complete, give the lamp time (about 5

minutes) to cool before plugging it back in. If the lamp overheats, it may fail to light, and

its lifetime will be shortened.

Turning the power on and off (Continued)

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Toshiba TDP-T98 Projector. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Toshiba. They might be able to provide an original manual. Are you looking for the manual of your Toshiba TDP-T98 Projector in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Toshiba Projectors
More manuals of Projectors

Frequently Asked Questions about Toshiba TDP-T98 Projector

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Toshiba TLP-T60M Projector

Manual

Toshiba TLP-781U Projector

Manual

Toshiba TLP-XE30 Projector

Manual

Toshiba TLP-470U Projector

Manual

Toshiba TLP-680U Projector

Manual

Toshiba TLP-451U Projector

Manual

Toshiba TLP-MT3E Projector

Manual

Toshiba TDP-SC25 Projector

Related categories