Home > Garden & Terrace > Hedgecutters > Makita Hedgecutters > Makita DUH507 Hedgecutter

Manual Makita DUH507 Hedgecutter

Need a manual for your Makita DUH507 Hedgecutter? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

13 ENGLISH

3. Remove the bolts and the shear blades from the

tool. Then remove the dust guard, the metal sleeves



Fig.7: 1. Bolt 2. Shear blades 3. Dust guard

4. Metal sleeve 5. Flat washer

NOTICE:

Be careful not to lose the bolts, the dust

 These

parts are needed again when installing new shear blades.

4. Check if the resin sleeve remains on the machine,

and if so, remove the resin sleeve.

Fig.8: 1. Resin sleeve

NOTE: Old resin sleeves are not need to be stored.

The new shear blades include the new resin sleeves.

5. Remove the blade cover, and then attach it to the

new shear blades.

Fig.9: 1. Blade cover



Fig.10: 1. Gear

7. Make sure the resin sleeves are attached on the

shear blades.

Fig.11: 1. Resin sleeve

8. Apply some grease provided with the new shear

blades as illustrated.

Fig.12: 1. Grease

9. Hold the guide bar, and then slide out the shear



Fig.13: 1. Guide bar 2. Shear blades

10. Attach the dust guard to the shear blades.

Fig.14: 1. Dust guard

11. Place the new shear blades on the tool so that



󰀨

the holes in the gear beforehand.

Fig.15: 1. Shear blades 2. Resin sleeve 3. Hole

12. 

Fig.16

13. 

tighten the bolts.

Fig.17: 1. Metal sleeve 2. Flat washer 3. Bolt

14. Attach the cover, and then tighten 6 screws.

Fig.18: 1. Screw 2. Cover

Installing or removing the chip receiver

Optional accessory

CAUTION: When installing or removing the

chip receiver, always wear gloves so that your

hands do not directly contact the shear blades.

NOTICE: The blade cover cannot be installed if

the chip receiver is installed on the tool. Before

carrying or storing the tool, uninstall the chip

receiver, and then install the blade cover to avoid

exposure of the shear blades.

NOTICE: Be sure to remove the blade cover

before installing the chip receiver.

The chip receiver gathers discarded leaves and makes

clean-up afterward much easier. It can be installed on

either side of the tool.

1. Align the holes on the chip receiver with the

screws on the shear blades.

Fig.19: 1. Screw

2. Hook the claws of the chip receiver to the groove

on the shear blades.

Fig.20: 1. Claw 2. Groove

3. Press the levers on the chip receiver, and then

hook the claws on the other side to the groove on the

shear blades.

Make sure that all the claws are hocked in the groove of



Fig.21: 1. Lever 2. Claw

To remove the chip receiver, press the levers to release

the claws.

Fig.22: 1. Lever

NOTICE: Never try to remove the chip receiver

by an excessive force with its hooks locked to the

shear blades.

OPERATION

WARNING: Keep hands away from shear

blades.

CAUTION: Avoid operating the tool in very

hot weather as much as practicable. When operat-

ing the tool, be careful of your physical condition.

CAUTION: Be careful not to accidentally

contact a metal fence or other hard objects while

trimming. The shear blades may break and cause



CAUTION: Be careful not to allow the shear

blades to contact the ground. The tool may recoil



CAUTION: Overreaching with a hedge trim-

mer, particularly from a ladder, is extremely

dangerous. Do not work while standing on anything



NOTICE: Do not attempt to cut branches thicker

than 10 mm in diameter with the tool. Cut branches

to 10 cm lower than the cutting height using branch

cutters before using the tool.

Fig.23: (1) Cutting height (2) 10 cm

NOTICE: Do not cut down dead trees or similar

hard objects. Doing so may damage the tool.

NOTICE: Do not trim the grass or weeds while

using the shear blades. The shear blades may

become tangled in the grass or weeds.

Hold the tool with both hands, hold the front handle

while pressing the switch lever and pull the switch trig-

ger, and then move the tool forward.

Fig.24

Download manual in English (PDF, 15.47 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Makita DUH507 Hedgecutter by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Makita DUH507 Hedgecutter?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Makita DUH507 Hedgecutter. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Makita DUH507 Hedgecutter. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Makita. They might be able to provide an original manual. Are you looking for the manual of your Makita DUH507 Hedgecutter in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Makita
Model	DUH507
Category	Hedgecutters
File type	PDF
File size	15.47 MB

All manuals for Makita Hedgecutters
More manuals of Hedgecutters

Frequently Asked Questions about Makita DUH507 Hedgecutter

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How do I know my hedgecutter is blunt? Verified

When branches are being pulled instead of cut, the hedgecutter is blunt and needs to be sharpened.

This was helpful (346) Read more

How do I sharpen my hedgecutter blades? Verified

Sharpening your hedgecutter blades is important for maintaining the performance and efficiency of the tool. To sharpen the blades, you will need a file or sharpening stone specifically designed for the type of blade on your hedgecutter.

This was helpful (299) Read more

How do I lubricate my hedgecutter blades? Verified

Lubricating your hedgecutter blades will help to reduce friction and wear, prolonging the life of the tool. Use a high-quality lubricating oil specifically designed for hedgecutters and apply a small amount to the blades after each use.

This was helpful (147) Read more

How can I prevent rust from forming on my hedgecutter blades? Verified

Rust can cause damage to your hedgecutter blades, reducing their performance and lifespan. To prevent rust, clean and dry the blades thoroughly after each use and store them in a dry, clean place. You can also consider applying a protective coating, such as oil or a rust inhibitor, to the blades before storing them.

This was helpful (90) Read more