Home > Home & Decoration > Lamps > Kichler Lamps > Kichler 16094CBR VLO Lamp

Manual Kichler 16094CBR VLO Lamp

Need a manual for your Kichler 16094CBR VLO Lamp? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

For warranty information please visit: kichler.com/customer-care/warranty-information/landscape-warranty

Pour de plus amples informations sur la garantie, cliquez sur le lien ci-dessous : kichler.com/customer-care/warranty-information/landscape-warranty

IS-16093-CB

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

OUTDOOR USE ONLY

DOM ETRE INSTALLE A L’EXTERIEUR

INSTRUCTIONS

For Assembling and Installing Fixtures in Canada

Pour L’assemblage et L’installation Au Canada

Nous sommes là pour vous aider 866-558-5706

Heures : du lundi au vendredi, de 9h à 17h (heure de l’Est)

SAFETY INSTRUCTIONS

READ THIS FIRST

KEEP THESE INSTRUCTIONS

CAUTION – RISK OF SHOCK –

Disconnect Power at the main circuit breaker panel or main fusebox

before starting and during the installation.

This xture is intended for installation in accordance with the

National Electric Code (NEC) and Local code specications. Failure

to adhere to these codes and instructions may result in serious injury

and/or property damage and will void the warranty. If you are not

familiar with code requirements, installation by a certied electrician

is recommended.

Instructions for adding the Side Fire Trim Ring Part No. 16093CBR or 4

Way Trim Ring Part No. 16094CBR to the In-Ground Fixtures

16023CBR27, 16023CBR30, 16024CBR27, 16034CBR30, 16025CBR27

and 16025CBR30.

INSTALLATION

1) Determine the orientation of the Side Fire Trim Ring or 4 Way Trim

 Ringshouldfacefordesiredlightinge󰀨ect.TheSideFireTrimring 

or 4 Way Trim Ring can be oriented in 45° increments.

2) Removethe(8)originalcoverscrewsfromthextureandremove 

the existing trim ring and glass lens and discard (see Fig. 1).

3) Ifrequired,whiletrimringandlensareo󰀨,usemagnettoadjust 

 thelumenlevel.Refertostandardxtureinstructionsheet.Light 

engine module is pointed straight up from the factory. Ensure that

light engine is pointed straight up before assembling (see Fig. 1).

4) Placeplasticlensonxtureovergasketring.NextplaceSideFire 

Trim Ring or 4 Way Trim Ring over the plastic lens and secure to

 thextureusingthescrewsremovedpreviously.Careshouldbe 

 takentopreventdirt,mulchanddebrisfromaccumulatingonthe 

 lens,gasketormatingsurfacesofthehousing(seeFig.2).

5) Tighten screws in sequence, per Fig. 3, torque each screw

to 20-25 in/lbs (2.3-2.8 N-m).

CONSIGNES DE SÉCURITÉ

À LIRE EN PREMIER

CONSERVER CES CONSIGNES

ATTENTION – RISQUE DE DÉCHARGES ÉLECTRIQUES –

Couper le courant au niveau du panneau du disjoncteur du circuit

principal ou de la boîte à fusibles principale avant de procéder à

l’installation.

Cet appareil est prévu pour l’installation conformément au Code

électrique National (NEC) et les spécications du code Local. Ne

pas respecter ces codes et instructions peut entraîner des blessures

graves et/ou des dommages matériels et annulera la garantie. Si

vous ne connaissez pas les exigences de ces codes, il est

recommandé de coner l’installation à un électricien certié.

Instructions pour l’addition de l’anneau de garniture pour éclairage latéral

simple (Side Fire Trim Ring, pièce no 16093CBR) ou de l’anneau de

garniture pour éclairage latéral à 4 faisceaux (4 Way Trim Ring, pièce no

16094CBR) aux luminaires enterrés (pièce no 16023CBR27, pièce no

16023CBR30, pièce no 16024CBR27, pièce no 16034CBR30, pièce no

16025CBR27 et pièce no 16025CBR30).

INSTALLATION

1) Déterminer l’orientation requise de l’anneau de garniture pour

éclairage latéral simple ou de l’anneau de garniture pour éclairage latéral à 4

 faisceauxpourobtenirl’e󰀨etd’éclairagedésiré.L’orientationdel’anneaude 

garniture pour éclairage latéral simple ou de l’anneau de garniture pour

éclairage latéral à 4 faisceaux peut être réglée en incréments de 45°.

2) Retirer les huit (8) vis originales du couvercle du luminaire et retirer l’anneau de

 garnitureetlecouvercledeverreexistantsetendisposer(consulterlagure1).

3) Au besoin, pendant que l’anneau de garniture et le couvercle de verre sont

enlevés, utiliser l’aimant pour régler le niveau de lumens. Vous référer à la feuille

d’instruction du luminaire standard. À sa sortie de l’usine, le module moteur

lumière est pointé à la verticale. Vous assurer que le module moteur lumière est

 pointéàlaverticaleavantdepoursuivrel’assemblage(consulterlagure1).

4) Placerlalentilledeplasticsurleluminairepar-dessusl’anneaudejoint.Placer

ensuite l’anneau de garniture pour éclairage latéral simple ou l’anneau de

garniture pour éclairage latéral à 4 faisceaux par-dessus la lentille de plastic et le

 xersurleluminaireenutilisantlesvisprécédemmentretirées.Prendresoinde

 prévenirl’accumulationdeterre,depaillisetdedébrissurlalentille,lejoint 

 d’étanchéitéouunesurfacedejointementduboîtier.(consulterlagure2).

5) Serrerlesvisdansl’ordreindiquéàlagure3,àuncouplede20à25lb/po²

(2,3 – 2,8 Nm).

FIXTURE

DISPOSITIF

START

DÉMARRAGE

Fig. 3

Fig. 1

SCREWS

VIS

TRIM RING

ANNEAU DE

GARNITURE

Fig. 2

GLASS LENS

LENTILLE DE VERRE

LIGHT ENGINE

MOTEUR LUMIÈRE

SCREWS

VIS

SIDE FIRE TRIM RING

ANNEAU DE GARNITURE POUR

ÉCLAIRAGE LATÉRAL SIMPLE

4 WAY TRIM RING

ANNEAU DE GARNITURE

POUR ÉCLAIRAGE

LATÉRAL À 4 FAISCEAUX

PLASTIC LENS

LENTILLE DE PLASTIC

GASKET

JOINT D’ÈTANCHÉITÉ

Rating

Let us know what you think about the Kichler 16094CBR VLO Lamp by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Kichler 16094CBR VLO Lamp?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Kichler 16094CBR VLO Lamp. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Kichler 16094CBR VLO Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kichler. They might be able to provide an original manual. Are you looking for the manual of your Kichler 16094CBR VLO Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Kichler
Model	16094CBR VLO
Category	Lamps
File type	PDF
File size	1.2 MB

All manuals for Kichler Lamps
More manuals of Lamps

Frequently Asked Questions about Kichler 16094CBR VLO Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Is all LED lighting dimmable? Verified

No, not all LED lights are dimmable. This is indicated on the packaging or the light itself.

This was helpful (462) Read more

I put a new light in my lamp but it won't turn on, why is that? Verified

Some lamps are made for light sources of a specific wattage. When a light source is inserted that requires a higher wattage than the lamp can provide, the light may not turn on. If the lamp delivers a much higher wattage than what the light source is made for, the light source can burn out.

This was helpful (315) Read more

Why is the colour of light important? Verified

There generally are two kinds of light, warm light and cold light. Cold light keeps you sharp and awake. Warm light has a relaxing effect. The warmth of the light is measured in Kelvin and is indicated on the packaging of the lamp itself.

This was helpful (255) Read more

What is lumen? Verified

Lumen is a measuring unit for the total amount of visible light emitted by a source.

This was helpful (190) Read more

What screw bases exist? Verified

Worldwide there many types of sockets, but most used are those based on the Edison screw, indicated with the letter E. In most countries screw bases E27 and E14 are standard. In the United States E26, E17, E12 and E10 are standard.

This was helpful (142) Read more

What do watts say about my lamp? Verified

Watt is a measuring unit for electricity consumption. Lamps that produce more light, generally use more Watt, but for comparing light output you should always use lumen.

This was helpful (113) Read more