Home > Home & Decoration > Lamps > Kichler Lamps > Kichler 15194AZ Enclosed Lamp

Manual Kichler 15194AZ Enclosed Lamp

Need a manual for your Kichler 15194AZ Enclosed Lamp? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

INSTRUCTIONS PERTAINING TO A RISK OF FIRE,OR INJURY TO PERSONS

IMPORTANT SAFETY INSTRUCTIONS

Lighted lamp is HOT!

WARNING — To reduce the risk of FIRE OR INJURY TO PERSONS.

1) Turn off / unplug and allow to cool before replacing lamp.

2) Lamp gets HOT quickly! Contact only switch / plug when turning on.

3) Do not touch hot lens or cowl.

4) Do not remain in light if skin feels warm. (Light is intense, it may cause “sunburn”.)

5) Do not look directly at lighted lamp.

6) Keep lamp away from materials that may burn.

7) Use only with wattage and lamp marked on ﬁxture.

8) Do not touch the inner glass envelope of the lamp at any time. Use a soft cloth. Oil from skin may damage lamp.

9) Do not operate the ﬁxture with a damaged or missing lens.

SAFETY INSTRUCTIONS

READ THIS FIRST

KEEP THESE INSTRUCTIONS

This ﬁxture is intended for installation in accordance with the National

Electric Code (NEC) and Local code speciﬁcations. Failure to adhere to

these codes and instructions may result in serious injury and/or property damage and will void the warranty.

1) WARNING: This ﬁxture is not to be installed within 10 feet (3M) of a pool, spa or fountain.

2) This ﬁxture is to be used only with a power unit (transformer) rated a maximum of 300 W (25 AMPS) 15 volts.

3) According to the requirements of the National Electric Code (NEC), direct

burial rated wire is to be buried a minimum of 6" [152mm] beneath the surface of the ground.

NOTE: If additional Direct Burial wire is needed, contact your local Kichler

landscape distributor.

 •8GAwirecanbepurchasedinlengthof250’(76M),15503-BK.

 •10GAwirecanbepurchasedinlengthof250’(76M),15504-BK.

 •12GAwirecanbepurchasedinlengthsof100’(30M),15501-BK;250’(76M),15502-BK;500’(152M),15505-BK;and1000’ 

  (304M),15506-BK.

4) Fixture shall not use a tungsten halogen lamp unless the ﬁxture is marked for use with such lamps.

5) Wiring connections must be made with approved/listed wire connection device(s) suitable for the application. Do not exceed

 manufacturers’wiringcombinationspecicationsforsizeandquantityofconductors.

CAUTION

WHEN INSTALLING KICHLER LANDSCAPE LIGHTING (LINE VOLTAGE OR LOW VOLTAGE), CARE SHOULD BE TAKEN TO KEEP CLEAR OF POTENTIALLY

COMBUSTIBLE MATERIALS.

WHEN MAINTAINING THE FIXTURES, BE SURE TO REMOVE LEAVES, PINE NEEDLES, GRASS CLIPPINGS, MULCH, OR ANY DEBRIS THAT HAS ACCUMULATED

ON THE LIGHT BULB, LENS, OR BODY OF THE FIXTURE.

ASSEMBLY AND INSTALLATION

1) Determine desired location for xture and dig hole. Hole should be approximately 6" (152mm) in diameter and 10" (254mm) deep.

2) Fill bottom of hole with approximately 3" (76mm) of pea gravel.

3) Remove screws from top of xture then remove cap, glass and yoke assembly.

4) For installation of incandescent lamp: Assemble rubber clips to yoke with groove at top facing center. Rubber clips should be

equally spaced.

For installation of LED lamp: Assemble rubber clips to yoke. The thicker end of each rubber clip should be facing up. This will

allow for proper seating of the LED lamp. Rubber clips should be equally spaced.

5) Connect wires to contacts on back of bulb and snap bulb into rubber clips.

6) Insert yoke assembly with bulb into xture. Gasket around top of yoke assembly should be inspected to insure it is clean and free

of debris.

7) Place glass and cap on top of xture and secure in place with screws.

8) Lay xture in hole and backll around the xture with soil.

9) Make wire connections using supplied Kichler

Pro Series Wire Connectors following instructions included, or using other

approved wiring connection method (not supplied.)

Date Issued: 2/20/15 IS-15194-US

For warranty information please visit: http://www.landscapelighting.com/portal/warranty_page

Para informacion de la garantia por favor visite: www.landscapelighting.com/portal/warranty_page

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

Rating

Let us know what you think about the Kichler 15194AZ Enclosed Lamp by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Kichler 15194AZ Enclosed Lamp?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Kichler 15194AZ Enclosed Lamp. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Kichler 15194AZ Enclosed Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kichler. They might be able to provide an original manual. Are you looking for the manual of your Kichler 15194AZ Enclosed Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Kichler
Model	15194AZ Enclosed
Category	Lamps
File type	PDF
File size	0.29 MB

All manuals for Kichler Lamps
More manuals of Lamps

Frequently Asked Questions about Kichler 15194AZ Enclosed Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Is all LED lighting dimmable? Verified

No, not all LED lights are dimmable. This is indicated on the packaging or the light itself.

This was helpful (495) Read more

I put a new light in my lamp but it won't turn on, why is that? Verified

Some lamps are made for light sources of a specific wattage. When a light source is inserted that requires a higher wattage than the lamp can provide, the light may not turn on. If the lamp delivers a much higher wattage than what the light source is made for, the light source can burn out.

This was helpful (355) Read more

Why is the colour of light important? Verified

There generally are two kinds of light, warm light and cold light. Cold light keeps you sharp and awake. Warm light has a relaxing effect. The warmth of the light is measured in Kelvin and is indicated on the packaging of the lamp itself.

This was helpful (288) Read more

What is lumen? Verified

Lumen is a measuring unit for the total amount of visible light emitted by a source.

This was helpful (228) Read more

What screw bases exist? Verified

Worldwide there many types of sockets, but most used are those based on the Edison screw, indicated with the letter E. In most countries screw bases E27 and E14 are standard. In the United States E26, E17, E12 and E10 are standard.

This was helpful (172) Read more

What do watts say about my lamp? Verified

Watt is a measuring unit for electricity consumption. Lamps that produce more light, generally use more Watt, but for comparing light output you should always use lumen.

This was helpful (149) Read more