Home > Home & Decoration > Lamps > Kichler Lamps > Kichler 10769NILED Avon Lamp

Manual Kichler 10769NILED Avon Lamp

Need a manual for your Kichler 10769NILED Avon Lamp? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Date Issued: 10/12/17 IS-10769LED-CB

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

CAUTION – RISK OF SHOCK –

Disconnect Power at the main circuit breaker panel or main

fusebox before starting and during the installation.

4) Make wire connections. Reference chart below for correct con-

nections and wire accordingly.

5) Carefully push backpan[1] to ceiling, attach backpan[1] to

outlet box[2] by tightening mounting screws[3].

6) Make sure all connections remain secure and wires do not get

pinched.

7) Place diffuser[4] inside diffuser ring[5] and attack to back-

pan[1] using lock-up knobs[6].

WARNING:

This xture is intended for installation in accordance with the

National Electrical Code (NEC) and all local code specications.

If you are not familiar with code requirements, installation by a

certied electrician is recommended.

CLEANING:

Always be certain that electric current is turned off before cleaning.

Only a damp cloth should be used. Harsh cleaning products may

damage the nish.

FCC INFORMATION:

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following mea-

sures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

INSTALLATION:

• Read and understand all instructions and illustrations completely

before proceeding with assembly and installation of xture.

• If you have any doubts about how to install this xture, or if the

xture fails to operate completely, please contact a qualied

electrician.

• All parts must be used as indicated in the instructions. Do not

substitute any parts, leave parts out, or use any parts that are

worn or broken. Failure to obey this instruction could invalidate

the UL listing, C.S.A. certication, and/or ETL listing of this xture.

• Fixture is to be connected to a single branch circuit.

• Mounting surface should be clean, dry, ﬂat and 1/4” larger than

the xture housing surface.

INSTRUCTIONS:

1) Position the backpan[1] over the outlet box[2]. Line up mount-

ing holes in backpan[1] with mounting holes on outlet box[2].

Secure the backpan[1] to the outlet box[2] using mounting

strap screws[3] provided.

2) Loosen mounting screws[3] and remove backpan[1] from

outlet box[2].

3 ) Grounding instructions: (See Illus. A or B).

A) On xtures where mounting strap is provided with a hole

and two raised dimples. Wrap ground wire from outlet box

around green ground screw, and thread into hole.

B) On xtures where a cupped washer is provided. Attach

ground wire from outlet box under cupped washer and

green ground screw, and thread into mounting strap.

If xture is provided with ground wire. Connect xture ground

wire to outlet box ground wire with wire connector. (Not pro-

vided.) After following the above steps. Never connect ground

wire to black or white power supply wires.

GREEN GROUND

SCREW

CUPPED

WASHER

OUTLET BOX

GROUND

FIXTURE

GROUND

DIMPLES

WIRE CONNECTOR

OUTLET BOX

GROUND

GREEN GROUND

SCREW

FIXTURE

GROUND

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

*Parallel cord (round & smooth) *Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

Rating

Let us know what you think about the Kichler 10769NILED Avon Lamp by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Kichler 10769NILED Avon Lamp?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Kichler 10769NILED Avon Lamp. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Kichler 10769NILED Avon Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kichler. They might be able to provide an original manual. Are you looking for the manual of your Kichler 10769NILED Avon Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Kichler
Model	10769NILED Avon
Category	Lamps
File type	PDF
File size	0.17 MB

All manuals for Kichler Lamps
More manuals of Lamps

Frequently Asked Questions about Kichler 10769NILED Avon Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Is all LED lighting dimmable? Verified

No, not all LED lights are dimmable. This is indicated on the packaging or the light itself.

This was helpful (462) Read more

I put a new light in my lamp but it won't turn on, why is that? Verified

Some lamps are made for light sources of a specific wattage. When a light source is inserted that requires a higher wattage than the lamp can provide, the light may not turn on. If the lamp delivers a much higher wattage than what the light source is made for, the light source can burn out.

This was helpful (315) Read more

Why is the colour of light important? Verified

There generally are two kinds of light, warm light and cold light. Cold light keeps you sharp and awake. Warm light has a relaxing effect. The warmth of the light is measured in Kelvin and is indicated on the packaging of the lamp itself.

This was helpful (255) Read more

What is lumen? Verified

Lumen is a measuring unit for the total amount of visible light emitted by a source.

This was helpful (190) Read more

What screw bases exist? Verified

Worldwide there many types of sockets, but most used are those based on the Edison screw, indicated with the letter E. In most countries screw bases E27 and E14 are standard. In the United States E26, E17, E12 and E10 are standard.

This was helpful (142) Read more

What do watts say about my lamp? Verified

Watt is a measuring unit for electricity consumption. Lamps that produce more light, generally use more Watt, but for comparing light output you should always use lumen.

This was helpful (113) Read more