Manual Kichler 10769NILED Avon Lamp

Need a manual for your Kichler 10769NILED Avon Lamp? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

Date Issued: 10/12/17 IS-10769LED-CB
INSTRUCTIONS
For Assembling and Installing Fixtures in Canada
Pour L’assemblage et L’installation Au Canada
Nous sommes là pour vous aider 866-558-5706
Heures : du lundi au vendredi, de 9h à 17h (heure de l’Est)
ATTENTION – RISQUE DE DÉCHARGES ÉLECTRIQUES -
Couper le courant au niveau du panneau du disjoncteur du
circuit principal ou de la boîte à fusibles principale avant de
procéder à l’installation.
WARNING:
Ce luminaire doit être installé conformément aux codes d’électricité
nationaux (NEC) et satisfaire toutes les spécications des codes
locaux. Si vous ne connaissez pas les exigences de ces codes, il
est recommandé de coner l’installation à un électricien certié.
NETTOYAGE:
Toujours veiller à ce que le courant électrique soit coupé avant de
nettoyer. Utiliser uniquement un chiffon doux humidié. Les produits
de nettoyage trop puissants peuvent endommager la nition.
FCC INFORMATION:
Cet appareil est conforme à la section 15 de la réglementation de la
FCC. L’exploitation est soumise aux deux conditions suivantes :
(1) Cet équipement ne doit pas causer d’interférences
nuisibles, et
(2) cet équipement doit accepter toute interférence reçue, y
compris les interférences risquant d’engendrer un fonc-
tionnement indésirable.
Remarque: Des tests ont conrmé que ce matériel respecte les
limites d’un dispositif numérique de catégorie B, en vertu de la sec-
tion 15 de la réglementation de la FCC. Ces limites ont été conçues
pour fournir une protection raisonnable contre le brouillage nuisible
d’une installation résidentielle. Cet équipement génère, utilise et
peut rayonner de l’énergie radiofréquence et, s’il n’est pas installé
et utilisé selon les instructions, peut causer de l’interférence nuis-
ible aux communications de radio. Cependant, il est néanmoins
possible qu’il y ait de l’interférence dans une installation en particu-
lier. Si cet équipement cause du brouillage nuisible à la réception
du signal de radio ou de télévision, ce qui peut être déterminé en
éteignant puis en rallumant l’appareil, l’usager peut essayer de cor-
riger l’interférence en appliquant une des mesures suivantes :
Réorienter l’antenne de réception ou changer son emplace-
ment.
Augmenter la distance séparant l’équipement et le récepteur.
Brancher le matériel dans la prise de courant d’un circuit dif-
férent de celui auquel le récepteur est branché.
Consulter le revendeur ou un technicien radio/télé
d’expérience.
INSTALLATION:
Read and understand all instructions and illustrations com-
pletely before proceeding with assembly and installation of
xture.
If you have any doubts about how to install this xture, or if the
xture fails to operate completely, please contact a qualied
electrician.
All parts must be used as indicated in the instructions. Do not
substitute any parts, leave parts out, or use any parts that are
worn or broken. Failure to obey this instruction could invalidate
the UL listing, C.S.A. certication, and/or ETL listing of this
xture.
Fixture is to be connected to a single branch circuit.
Mounting surface should be clean, dry, flat and 1/4” larger than
the xture housing surface.
Instructions
1) Placez l’arrière-plan[1] sur la boîte de sortie[2]. Line up mount-
ing holes in backpan[1] with mounting holes on outlet box[2].
Fixez l’arrière-plan[1] à la boîte de sortie[2] en utilisant les vis
de sangle de montage[3] fournies.
2) Loosen mounting screws[3] and remove backpan[1] from
outlet box[2].
3) Connecter les ls. Se porter au tableau ci-dessous pour faire
les connexions.
3) Pousser prudemment l’arrière-plan[4] au plafond, xer la
protection[4] à la sangle de xation[1] à l’aide des vis de xa-
tion[5].
4) Assurez-vous que toutes les connexions restent sécurisées et
que les ls ne sont pas pincés.
5) Placer le diffuseur[4] à l’intérieur du diffuseur[5] et attaquer à
l’arrière[1] à l’aide des boutons de verrouillage[6].
Connecter le fil noir ou
rouge de la boite
Connecter le fil blanc de la boîte
A Noir A Blanc
*Au cordon parallèle (rond et lisse)
*Au cordon parallele (à angles droits el strié)
Au bransparent, doré, marron, ou
noir sans fil distinctif
Au transparent, doré, marron, ou
noir avec un til distinctif
Fil isolé (sauf fil vert) avec
conducteur en cuivre
Fil isolé (sauf fil vert) avec
conducteur en argent
*Remarque: Avec emploi d’un fil paralléle
(SPT I et SPT II). Le fil neutre est á angles
droits ou strié et l’autre fil doit étre rond ou
lisse (Voir le schéma).
Fil Neutre
2
1
3
4
5
6
Download manual in English (PDF, 0.17 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Kichler 10769NILED Avon Lamp by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Kichler 10769NILED Avon Lamp?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Kichler 10769NILED Avon Lamp. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Kichler 10769NILED Avon Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Kichler. They might be able to provide an original manual. Are you looking for the manual of your Kichler 10769NILED Avon Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Kichler
Model 10769NILED Avon
Category Lamps
File type PDF
File size 0.17 MB

All manuals for Kichler Lamps
More manuals of Lamps

Frequently Asked Questions about Kichler 10769NILED Avon Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Is all LED lighting dimmable? Verified

No, not all LED lights are dimmable. This is indicated on the packaging or the light itself.

This was helpful (492) Read more

I put a new light in my lamp but it won't turn on, why is that? Verified

Some lamps are made for light sources of a specific wattage. When a light source is inserted that requires a higher wattage than the lamp can provide, the light may not turn on. If the lamp delivers a much higher wattage than what the light source is made for, the light source can burn out.

This was helpful (347) Read more

Why is the colour of light important? Verified

There generally are two kinds of light, warm light and cold light. Cold light keeps you sharp and awake. Warm light has a relaxing effect. The warmth of the light is measured in Kelvin and is indicated on the packaging of the lamp itself.

This was helpful (283) Read more

What is lumen? Verified

Lumen is a measuring unit for the total amount of visible light emitted by a source.

This was helpful (228) Read more

What screw bases exist? Verified

Worldwide there many types of sockets, but most used are those based on the Edison screw, indicated with the letter E. In most countries screw bases E27 and E14 are standard. In the United States E26, E17, E12 and E10 are standard.

This was helpful (172) Read more

What do watts say about my lamp? Verified

Watt is a measuring unit for electricity consumption. Lamps that produce more light, generally use more Watt, but for comparing light output you should always use lumen.

This was helpful (147) Read more

What is LED? Verified

LED stands for Light-Emitting Diode. By running power through a semiconductor in the right direction, light is emitted.

This was helpful (127) Read more
Manual Kichler 10769NILED Avon Lamp

Related products

Related categories