Home > Household appliances > Washing Machines > Indesit Washing Machines > Indesit BWE 71283X WS EE N Washing Machine

Manual Indesit BWE 71283X WS EE N Washing Machine

Need a manual for your Indesit BWE 71283X WS EE N Washing Machine? Below you can view and download the PDF manual for free in English. This product currently has 12 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

TROUBLESHOOTING

Your machine could occasionally fail to work. Before contacting the Technical Assistance Service, make sure that the problem cannot be easily solved using the following list.

Anomalies Possible causes / Solution

The machine does not switch on.

The appliance is not plugged into the socket fully, or not enough to make contact.

There is no power to the socket, or the fuse has blown in the mains plug.

The wash cycle does not start.

The door is not closed properly.

The ON/OFF button has not been pressed.

The START/PAUSE button has not been pressed.

The water tap has not been turned on to allow water to ow into the machine.

A delayed start has been set.

The machine does not ll with water

(“H2O” appears on the display).

The water inlet hose is kinked.

The water inlet hose is not connected to the water supply.

The water pressure is too low.

The water tap has not been turned on to allow water to ow into the machine.

There is no water supply to the house.

The inlet valve lter is blocked.

The START/PAUSE button has not been pressed.

The machine continuously lls with water

and continually drains away or Water left

in the drum or Stuck on wash.

The top of the drain hose is too low - It must be tted at a height between 65 and 100 cm from the oor.

The drain hose is connected incorrectly to the sink trap allowing water to run into the machine, the drain hose

must be positioned higher than the bottom of the sink to prevent water owing down the drain hose.

The end of the drain hose has been pushed too far down the standpipe, the ‘U’ bracket should be tted 100

mm from the end of the drain hose.

The machine does not drain or spin - (error

lights ashing).

The Pump lter is blocked.

The drain hose is kinked.

New Installation - The blanking cap or spigot has not been removed if connected under a sink.

The drain hose or sink trap is blocked.

The machine does spin.

The ‘Spin’ Speed is set to “OFF”.

The machine does not heat or poor wash results.

The ‘Temperature’ is set to “OFF”.

The programme takes too long.

Programme times will vary due to water pressure, the incoming water temperature and if the wash load

goes out of balance. This will increase the programme times accordingly.

The Display sticks at one ‘time to end’

for more than 1 Minute or the Display

changes the estimated ‘Time to End’

during the programme.

The display time is for guidance only - it is not a precise time to nish and may vary.

The washing machine vibrates a lot during

the spin cycle.

The feet have not been adjusted, enabling the machine to rock.

New Installation - Either the Transit Bolts including the plastic spacers, or the Polystyrene Packaging have not

been removed when installing the machine.

The machine is trapped between cabinets and/or walls.

The load is in a slight out of balance condition and machine is spinning, but at a lower speed.

The machine is noisy.

There will always be some motor, pump and drum noise during spin.

The machine leaks from the

dispenser.

The dispenser drawer is blocked with detergent and requires cleaning.

The water pressure is too high and requires turning down - turn down the tap on the water supply pipe slightly and try again.

The machine is tilting forwards - It must be level when in its nal position.

The “Options” and START/PAUSE

indicator lights ash rapidly and the display

visualises an error code (e.g.: F-01, F-...).

Switch o the machine and unplug it, wait for approximately 1 minute and then switch back on again. If the

problem persists contact Technical Assistance Centre.

The machine smells. The machine requires a service wash. Run a auto clean wash cycle with detergent and no laundry.

The water level is too low when the

machine is washing.

The water level is correct if it can be seen at the bottom of the door.

There is too much foam.

The detergent is not suitable for machine washing (it should display the text

‘for washing machines’ or ‘hand and machine wash’ or the like).

General.

Your washing machine contains sensors that monitor progress during the wash cycle (eg: Water Levels,

Temperatures, Out of Balance loads, Wash time/progress). Normally, if your machine successfully

completes the cycle, there is unlikely to be anything wrong!

The PUSH & GO option does not activate.

After switching on the machine, a control other than PUSH & GO was activated. Switch the machine o

and press the PUSH & GO button.

You can download the Safety Instructions, Product Fiche and Energy data by:

• Visiting our website - http://docs.indesit.eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product’s identication plate.

• For User’s Repair & Maintenance Information visit www.indesit .com

The model information can be retrieved using the QR-Code reported in the energy label. The label also includes

the model identier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu

xxxxxxxxxxxx

xxxx

Download manual in English (PDF, 0.44 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Indesit BWE 71283X WS EE N Washing Machine by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Indesit BWE 71283X WS EE N Washing Machine?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Indesit BWE 71283X WS EE N Washing Machine. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Indesit BWE 71283X WS EE N Washing Machine. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Indesit. They might be able to provide an original manual. Are you looking for the manual of your Indesit BWE 71283X WS EE N Washing Machine in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Indesit
Model	BWE 71283X WS EE N
Category	Washing Machines
File type	PDF
File size	0.44 MB

All manuals for Indesit Washing Machines
More manuals of Washing Machines

Frequently Asked Questions about Indesit BWE 71283X WS EE N Washing Machine

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

My washing machine won't start when I press the start-button, what can I do? Verified

In many cases the door of the washing machine hasn't closed properly. Open and close the door and try again.

This was helpful (25310) Read more

My washing machine won’t drain, what can I do? Verified

The main reason a washing machine won’t drain is because of blockage in either the pump or the drain hose. If your washing machine has access to these parts, try to remove any blockage. If this does not solve the problem or if you don’t have access to these parts you should contact a mechanic or the manufacturer.

This was helpful (24072) Read more

There is no water coming into my washing machine, what can I do? Verified

Check if the water inlet is open and if there aren't any kinks in the hose of the water inlet. If this doesn't solve the problem you should contact the manufacturer.

This was helpful (9777) Read more

The door of my washing machine won't open, what can I do? Verified

There can be several causes. The most common cause is the filter being clogged. Unplug the appliance and check the filter. Remove any blockage if necessary. The location of the filter is different depening on the model. It is also possible that there is a special lever to open the door. If these options don't help, the last option is unplug the appliance for a period of 30-60 minutes and try to open the door after that. If this doesn't work, contact the manufacturer or a mechanic.

This was helpful (8353) Read more

My washing machine makes a lot of noice and/or vibrates loudly, what can I do about that? Verified

It's possible that the washing machine has not been leveled. You can do this by adjusting the feet to make it perfectly level. The problem can also be caused by inserting to much clothes in the machine. If these are not the cause of your problem you should contact the manufacturer.

This was helpful (6958) Read more

In which compartment should the detergent go? Verified

Most washing machines have 3 compartments for detergent. These compartments are often marked with I, II and * to show where the detergent goes. Compartment I is used for a pre-wash cycle, II is for the main wash cycle and * is for fabric softener. Compartment II is used most often.

This was helpful (5114) Read more

My washing machine smells, what can I do about it? Verified

There are washing machines with self-cleaning features. If these features are not available it's possible to add 100ml of white vinegar or 100gr of soda crystals and have the washing machine run a 90 ℃ program.

This was helpful (4268) Read more

Can I connect my washing machine to a warm water outlet? Verified

Although washing machines can probably handle water intake up to 65°C, this is not recommended by most manufacturers. There are wash cycles that specifically make use of cold water. In those cases warm water can harm the results of your wash cycle. Also, many washing machines are designed to be connected to a cold water outlet.

This was helpful (3048) Read more

What should I pay attention to when moving a washing machine? Verified

When moving a washing machine, you should secure the drum. You can use the transit bolt which come with every washing machine and will prevent the drum from moving around inside the machine. You also need to drain all the water.

This was helpful (1600) Read more

Can I stack my dryer and washing machine? Verified

In general it is possible to directly stack a dryer and washing machine directly on top of each other. This only works with front loading models. However, it is advisable to use a fitting accessory to do so. This will prevent the machines from vibrating and falling off and also prevents damage to the bottom machine.

This was helpful (1356) Read more

Can I connect a washing machine to an extension cord? Verified

Appliances that require large amounts of power, like a washing machine, can not be connected to all extension cords. See what the power usage of the washing machine is, which is indicated in Watt, and check if the extension cord can handle this. There are extension cords with thicker cables that are made to handle larger appliances.

This was helpful (1323) Read more

What is the difference in usage between a washer-dryer and a separate washing machine and dryer? Verified

The biggest advantage of a washer-dryer is that it takes less space. However, a separate dryer will be able to dry more than a washer-dryer. A washer-dryer also uses relatively more energy and requires more time.

This was helpful (1323) Read more