Manual Ignis LEI 1270 Washing Machine

Need a manual for your Ignis LEI 1270 Washing Machine? Below you can view and download the PDF manual for free in English. This product currently has 12 frequently asked questions, 44 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

GB 1
DEFINITION OF USE
This washing machine is exclusively destined to
wash and spin machine washable laundry in
quantities which are usual for private households.
Observe the instructions given in these Instructions
for Use, the Installation Guide and the Programme
Chart when using the washing machine.
Keep these Instructions for Use, the Programme
Chart and the Installation Guide; if you pass on the
washing machine to another person, also give him/
her Instructions for Use, Programme Chart and
Installation Guide.
BEFORE USING THE WASHING MACHINE
1.Removing the packaging and inspection
After unpacking, make sure that the washing
machine is undamaged. If in doubt, do not use the
washing machine. Contact After-Sales Service or
your local retailer.
Keep the packaging materials (plastic bags,
polystyrene parts, etc.) out of reach of children,
as they are potentially dangerous.
If the appliance was exposed to the cold prior to
delivery, keep it at room temperature for a few
hours before operating.
2.Remove the transport bolts
The washing machine is fitted with transport
bolts to avoid any possible damage to the interior
during transport. Before using the machine, it is
imperative that the transport bolts are removed.
After their removal, cover the openings with the
4 enclosed plastic caps.
3.Install the washing machine
Remove the protective film from the control panel
(if available on your model).
Move the appliance without lifting it by the worktop.
Install the appliance on a solid and level floor
surface, preferably in a corner of the room.
Make sure that all four feet are stable and resting
on the floor and then check that the washing
machine is perfectly level (use a spirit level).
In case of wooden or so-called “floating floors”
(for instance certain parquet or laminate floors),
place the appliance on a 60 x 60 cm sheet of
plywood at least 3 cm in thickness which is
secured to the floor.
Make sure that the ventilation openings in the
base of your washing machine (if available on
your model) are not obstructed by a carpet or
other material.
4.Water inlet
Connect the water inlet hose(s) to the drinking
water supply in accordance with the regulations
of your local water company.
For models with one inlet valve: cold water
For models with two inlet valves: cold AND hot
water, or cold water only (see separate
Installation Guide).
Water tap: 3/4” threaded hose
connector
Water pressure
(flow pressure): 100-1000 kPa (1-10 bar).
Use only new hoses to connect the washing
machine to the water supply. Used hoses must
not be used and should be discarded.
For models with hot fill: the hot water inlet
temperature must not exceed 60°C.
5.Drain
Connect the drain hose to the siphon or hook it
over the edge of a sink by means of the “U” bend
supplied.
If the washing machine is connected to an
integrated drainage system, ensure the latter is
equipped with a vent to avoid simultaneous
loading and draining of water (siphoning effect).
6.Electrical connection
Electrical connections must be carried out by a
qualified technician in compliance with the
manufacturer’s instructions and current standard
safety regulations.
Data regarding voltage, power consumption and
protection requirements is given on the inside of
the door.
The appliance must be connected to the mains by
means of a socket with an earth connection in
accordance with current regulations. The
washing machine must be earthed by law. The
manufacturer declines all liability for damage to
property or injury to persons or animals due to
non-compliance with the directions given above.
Do not use extension leads or multiple sockets.
Before any maintenance on the washing machine
disconnect it from the mains supply.
After installation, access to the mains plug or to
disconnection from mains supply must be
ensured at all times via a double-pole switch.
Do not operate the washing machine if it has
been damaged during transport. Inform the
After-Sales Service.
Mains cable replacement is only to be carried out
by After-Sales Service.
The appliance must only be used in the
household for the prescribed uses.
Minimum housing dimensions:
Width: 600 mm
Height: 850 mm
Depth: 600 mm
Download manual in English (PDF, 0.2 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Ignis LEI 1270 Washing Machine by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Ignis LEI 1270 Washing Machine?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Ignis LEI 1270 Washing Machine. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

Sara 13-07-2019
Good evening, I would like to know what the red light on the tap means and why does the washing machine stop when it turns on?

reply | This was helpful (77) Read more (Translated by Google)
Isabella Picone 06-02-2020
Can I have the answer too?

This was helpful (14) (Translated by Google)
Andrea 18-05-2020
I would like to know too

This was helpful (8) (Translated by Google)
salvatore dattolo 15-12-2019
the washing machine does not start the key light at the top right is on

reply | This was helpful (76) Read more (Translated by Google)
Marieta 01-02-2021
Did you get an answer because I too have the same problem for 2 days ???

This was helpful (10) (Translated by Google)
Francesco 22-01-2022
When I press the start button, the washing machine does not start, I have to press it several times before it starts, what should I do?

This was helpful (5) (Translated by Google)
Giulietta 19-04-2019
The message f: 08 flashes on the display, what it means.

reply | This was helpful (40) (Translated by Google)
edoardo tobaldo 19-10-2019
the washing machine gives error f06. what does it mean? Thank you Edward

reply | This was helpful (27) (Translated by Google)
Valeria 02-07-2019
The display shows f23, I'd like to know what it means. Can you help me?

reply | This was helpful (22) (Translated by Google)

Loading…

umberto ragi 07-05-2020
15 minutes program, starts, loads water, but when there are 7 minutes left, it stops, the red filter light comes on and does not end the program. I would like to know if in addition to the front filter (VERY CLEAN) there is another one perhaps inside before or after the drain pump: thanks

reply | This was helpful (21) (Translated by Google)
Marilena 07-08-2019
Error f05 what does it mean

reply | This was helpful (16) (Translated by Google)
PAOLA ROLFO 17-10-2019
OFTEN THE LAUNDRY SMELLS OF PUTRID, HOWEVER THE CARE WASHING MACHINE WASHES ARE PERIODICALLY CARRIED OUT AS WELL AS THE CLEANING OF THE FILTER. THANKS PAOLA

reply | This was helpful (16) (Translated by Google)
Raffaella Quaranta 03-10-2019
My washing machine flashes with the writing f 27 what does it mean?

reply | This was helpful (15) (Translated by Google)
Riccardo Lattanzi 01-05-2020
hi in my ignis washing machine every time a wash finishes and I open the tray it finds water in the compartment where the softener goes ... I state that the filter I clean it monthly and the drain hose is clean ... thanks in advance

reply | This was helpful (15) (Translated by Google)
salvatore dattolo 15-12-2019
the washing machine does not start the key light at the top right is on

reply | This was helpful (10) Read more (Translated by Google)
Domenico Catanzaro 26-01-2020
I too have the same problem, the key light on and the play button continues to flash, what should I do? Many thanks in advance

This was helpful (29) (Translated by Google)
Lorenzo Falcone 16-12-2021
Did you get an answer?

This was helpful (0) (Translated by Google)
Sabri 12-05-2020
Hello in my washing machine with latinity to stay on the key light, while the play button flashes and the washing machine does not start what can I do. Many thanks in advance

reply | This was helpful (9) (Translated by Google)
Claudia 29-03-2021
Good morning, The washing phase was interrupted by mistake! Now the message C: 16 appears on the display of my washing machine. What is it about? In addition, the filter cleaning indicator lights up ”. What should I do? The washing machine is 3 years old

reply | This was helpful (8) (Translated by Google)
Isabella Mingione 15-05-2020
Good evening My washing machine is no longer spinning The minutes for the spin cycle appear on the display .. Is there anything I can do ?

reply | This was helpful (5) (Translated by Google)
Simona 10-04-2021
My washing machine does not start the key light is on and I also tried to open and close the door what can I do

reply | This was helpful (3) Read more (Translated by Google)
Maria Teresa 29-08-2021
It happened to me too, I found the solution by pushing the basket door handle several times immediately after pressing the "Start" button.

This was helpful (0) (Translated by Google)
Anna Cortenova 04-01-2022
My washing machine does not spin

reply | This was helpful (3) (Translated by Google)
Corso severino 19-04-2020
Lei 1270 start light flashes when the start button is pressed, the door does not open, no error code.

reply | This was helpful (2) (Translated by Google)
Giuseppina 02-01-2020
The washing machine does not start even though the start light is on.

reply | This was helpful (0) (Translated by Google)
Domenico Catanzaro 26-01-2020
Hello in my washing machine with latinity to stay on the key light, while the play button flashes and the washing machine does not start what can I do. Many thanks in advance

reply | This was helpful (0) (Translated by Google)
Giorgia Carrozzo 21-02-2020
I set a finished program, I immediately set another without pressing cancel. The door does not open anymore. I've run other programs letting them finish but it won't open

reply | This was helpful (0) (Translated by Google)
Thomas Zago 27-02-2020
The key light on and the play button continues to flash what should I do to start the washing machine? Many thanks in advance.

reply | This was helpful (0) (Translated by Google)
Corso severino 19-04-2020
Lei 1270 start light flashes and pressing the start button no error code starts.

reply | This was helpful (0) (Translated by Google)
valentina minculescu 14-05-2020
F8 lights up what happens? thanks p

reply | This was helpful (0) (Translated by Google)
Cristina Lepri 18-11-2020
After setting the program, I press the start button but it does not start and the light on the top right (door opening) stays on.

reply | This was helpful (0) (Translated by Google)
Catalina 05-01-2021
Where is the exhaust located? MY WASHING MACHINE IS ATTACHED TO THE WHOLE KITCHEN.

reply | This was helpful (0) (Translated by Google)
Marieta 01-02-2021
If my washing machine ignis lei 1270 does not switch on, the door LED remains on and normally it should have flashed

reply | This was helpful (0) (Translated by Google)
Salvatore 18-03-2021
My washing machine does not turn on

reply | This was helpful (0) (Translated by Google)
enrico 08-05-2021
I can know why the red light on the washing machine lights up of the key what does it mean?

reply | This was helpful (0) (Translated by Google)
Betty Bassani 09-09-2021
I have an Ignis washing machine loaded from above and the light with the padlock always turns on and the start does not start

reply | This was helpful (0) (Translated by Google)
Michela pendenza 21-09-2021
How is this washing machine turned on?

reply | This was helpful (0) (Translated by Google)
Viola 23-04-2022
I put the washing machine (ignis) in operation to wash it receives the detergent and takes the water, turns the spin cycle for washing and then the mechanical key light comes on? Please can you help me (the filter is clean) thanks to those who can help me !!!

reply | This was helpful (0) (Translated by Google)
Luciano circelli 25-05-2022
I don't get the fabric softener.

reply | This was helpful (0) (Translated by Google)
Souad 11-06-2022
My washing machine if you take Aqua in the first few laps and then it stopped by itself with a flashing red in place of the faucet drawing?

reply | This was helpful (0) (Translated by Google)
Patrizia 09-08-2022
My Lei 1279 also turns on the tap light. All right, faucet hose, I don't understand what it is

reply | This was helpful (0) (Translated by Google)
Manuela 26-01-2023
The washing machine has been giving problems since yesterday the red light on the wrench let's say when I want to start it. I put the program after a while both the light and the flashing light come on and it doesn't start. I tried to clean the filter and the situation does not change. What could it be??

reply | This was helpful (0) (Translated by Google)
Klaus 20-06-2023
My washing machine has the lock button on, the start button flashes and I can't get it to start. What do I have to do?

reply | This was helpful (0) (Translated by Google)
Andrea Roli 13-09-2023
After an hour it stops, with a red light and green writing "F 06". What should I do???

reply | This was helpful (0) (Translated by Google)

More about this manual

We understand that it’s nice to have a paper manual for your Ignis LEI 1270 Washing Machine. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Ignis. They might be able to provide an original manual. Are you looking for the manual of your Ignis LEI 1270 Washing Machine in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Ignis
Model LEI 1270
Category Washing Machines
File type PDF
File size 0.2 MB

All manuals for Ignis Washing Machines
More manuals of Washing Machines

Frequently Asked Questions about Ignis LEI 1270 Washing Machine

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

My washing machine won't start when I press the start-button, what can I do? Verified

In many cases the door of the washing machine hasn't closed properly. Open and close the door and try again.

This was helpful (23037) Read more

My washing machine won’t drain, what can I do? Verified

The main reason a washing machine won’t drain is because of blockage in either the pump or the drain hose. If your washing machine has access to these parts, try to remove any blockage. If this does not solve the problem or if you don’t have access to these parts you should contact a mechanic or the manufacturer.

This was helpful (22447) Read more

There is no water coming into my washing machine, what can I do? Verified

Check if the water inlet is open and if there aren't any kinks in the hose of the water inlet. If this doesn't solve the problem you should contact the manufacturer.

This was helpful (8863) Read more

The door of my washing machine won't open, what can I do? Verified

There can be several causes. The most common cause is the filter being clogged. Unplug the appliance and check the filter. Remove any blockage if necessary. The location of the filter is different depening on the model. It is also possible that there is a special lever to open the door. If these options don't help, the last option is unplug the appliance for a period of 30-60 minutes and try to open the door after that. If this doesn't work, contact the manufacturer or a mechanic.

This was helpful (7345) Read more

My washing machine makes a lot of noice and/or vibrates loudly, what can I do about that? Verified

It's possible that the washing machine has not been leveled. You can do this by adjusting the feet to make it perfectly level. The problem can also be caused by inserting to much clothes in the machine. If these are not the cause of your problem you should contact the manufacturer.

This was helpful (6357) Read more

In which compartment should the detergent go? Verified

Most washing machines have 3 compartments for detergent. These compartments are often marked with I, II and * to show where the detergent goes. Compartment I is used for a pre-wash cycle, II is for the main wash cycle and * is for fabric softener. Compartment II is used most often.

This was helpful (4334) Read more

My washing machine smells, what can I do about it? Verified

There are washing machines with self-cleaning features. If these features are not available it's possible to add 100ml of white vinegar or 100gr of soda crystals and have the washing machine run a 90 ℃ program.

This was helpful (3547) Read more

Can I connect my washing machine to a warm water outlet? Verified

Although washing machines can probably handle water intake up to 65°C, this is not recommended by most manufacturers. There are wash cycles that specifically make use of cold water. In those cases warm water can harm the results of your wash cycle. Also, many washing machines are designed to be connected to a cold water outlet.

This was helpful (2832) Read more

What should I pay attention to when moving a washing machine? Verified

When moving a washing machine, you should secure the drum. You can use the transit bolt which come with every washing machine and will prevent the drum from moving around inside the machine. You also need to drain all the water.

This was helpful (1391) Read more

What is the difference in usage between a washer-dryer and a separate washing machine and dryer? Verified

The biggest advantage of a washer-dryer is that it takes less space. However, a separate dryer will be able to dry more than a washer-dryer. A washer-dryer also uses relatively more energy and requires more time.

This was helpful (1096) Read more

Can I stack my dryer and washing machine? Verified

In general it is possible to directly stack a dryer and washing machine directly on top of each other. This only works with front loading models. However, it is advisable to use a fitting accessory to do so. This will prevent the machines from vibrating and falling off and also prevents damage to the bottom machine.

This was helpful (1094) Read more

Can I connect a washing machine to an extension cord? Verified

Appliances that require large amounts of power, like a washing machine, can not be connected to all extension cords. See what the power usage of the washing machine is, which is indicated in Watt, and check if the extension cord can handle this. There are extension cords with thicker cables that are made to handle larger appliances.

This was helpful (1093) Read more
Manual Ignis LEI 1270 Washing Machine

Related products

Related categories