Home > Camping & Outdoor > Tents > Eureka Tents > Eureka Headquarters Tent

Manual Eureka Headquarters Tent

Need a manual for your Eureka Headquarters Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Component List: 1 Tent Body 4 Poles 1 Carry Bag,

1 Stake Bag / Stakes 2 Hood Rods,

1 Tent Fly 1 Fly Rod 1 Pole Bag

ASSEMBLY

1. Lay the tent body out on the ground. In windy conditions, the

windward corner of the tent should be staked down. Take all of

the poles out of the carry bag and assemble them to their full

length.

NOTE: Orient the spider at the top of the tent such that the roof

fabric is not twisted and the holes are facing the short sides

of the tent.

2. One end of each frame pole has been reinforced and labeled

"TOP". Insert this end into one of the holes in the spider.

Make sure that it seats securely. Improper ﬁt could cause the

spider to break. See fig.1.

3. Follow the seam from the spider, down to the corner of the tent.

Make sure that the spider is properly oriented, then insert the

pin on the corner ring into the other end of the pole.

5. Connect all clips

to the frame. See fig.3.

6. Stake out the tent through the corner rings. Work by staking

opposite corners while applying tension to remove wrinkles

from the ﬂoor. Stake the side stake loops last.

NOTE: General purpose stakes have been included, sand or

snow may require a more substantial stake.

Purchase these from your Eureka! dealer.

WINDOWS: To help prevent condensation, keep the doors and windows

open.Tuck the window fabric into its pouch at the bottom of the window.

DIVIDER CURTAIN: After pitching the tent, you may install the included divider

curtain. Place the curtain peak toggle into the O-ring on the peak of the tent. Attach

each toggle, on the side of the curtain, to its corresponding ring on the tent.

NOTE: In strong winds, tie extra ropes to the storm loops on the fly and stake down.

TAKE DOWN: Pull up stakes. Release the fly's Velcro™ and buckles. Remove ﬂy and

take out rod. Remove clips from poles and pull posts off of the pins. Collapse the

tent poles/ rod and stow. Fold the tent onto itself and fold the fly and lay it on tent.

Roll up both towards the door and stow.

AVAILABLE OPTIONS: Floor Saver, Gear Loft

4. Insert the next pole into the opposite hole on the spider.

Carefully tension this assembly by placing the corner pin in the

other end of this pole. See fig.2.

7. Lay the ﬂy out on the ground upside down. Place the ends of

the ﬂy rod in the web pockets on the sides of the ﬂy. Fasten

the hook and loop strap around the center of the rod to keep

it in place. See fig.4.

8.Turn the ﬂy right side up and place it on the tent with the ﬂy pole over the

door. Fasten the hook and loop straps around the frame members to keep

the ﬂy in place.

Place hood rods through the sleeves on the ends of the ﬂy. Insert the ends of

the hood rods into the grommets at the corners of the windows.

Fasten the side release buckles at all of the corners and tension until all

wrinkles are gone from the ﬂy. Set the window hoods to the same height.

If the ﬂy has shifted, reattach the hook and loop straps to the frame.

See fig.5.

REV E 4.09

ASSEMBLY INSTRUCTIONS

FOR HEADQUATERS TENT:

YOUR TENT IS

READY FOR USE!

With the assembly on the ground, place a third pole

into the spider and place the corner pin in the other end.

Lift the spider and insert the last pole. Carefully apply tension

by inserting the corner pin into the end of this pole.

figure 4

figure 1

TOP

stake loop

figure 3

figure 2

figure 5

Rating

Let us know what you think about the Eureka Headquarters Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Eureka Headquarters Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Eureka Headquarters Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Eureka Headquarters Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Eureka. They might be able to provide an original manual. Are you looking for the manual of your Eureka Headquarters Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Eureka
Model	Headquarters
Category	Tents
File type	PDF
File size	0.69 MB

All manuals for Eureka Tents
More manuals of Tents

Frequently Asked Questions about Eureka Headquarters Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more