Home > Do-It-Yourself > Compressors > Clarke Compressors > Clarke XEV16-200 Compressor

Manual Clarke XEV16-200 Compressor

Need a manual for your Clarke XEV16-200 Compressor? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

Bleed valve

under pressure

switch blows

whilst

compressor is

running

Non return valve stuck (NRV)

open at junction of the tank and

the pump delivery pipe.

Drain Tank and remove

inspection nut to clean Non

Return valve

Compressor unit

starts, but stops

again after only

a few

revolutions.

Non-return valve leaking

(compressor unit is on load during

start).

Disconnect from the mains supply

and empty air receiver. Clean

or replace

Non-return valve blocked,

possibly frozen up.

Thaw non-return valve out

(Unit must be installed in frost-

free place).

Solenoid valve leaking or

defective (only applies to 10 HP

machines and above).

Contact Clarke Service

Unusual noise

from

compressor

Bolts loose. Tighten Bolts.

V-Belt flywheel or cooling coil

touching belt guard

Find place of contact and

remedy fault.

Flywheel loose. Tighten flywheel.

Unit installed on an unsuitable

base.

Move unit to a more solid

base

Bearings, piston rings or cylinder

worn.

Contact Clarke Service

Valve broken. Contact Clarke Service

Bearings of electric motor worn Contact Clarke Service

Compressor unit

starts and stops

more frequently

than usual.

Large amount of condensation in

air receiver.

Drain off condensation AT

LEAST once a week.

Leaks in control unit or inspection

cover.

Locate leaks (by means of

soapy water) and repair.

Too little pressure differential. Contact Clarke Service

SYMPTOM PROBABLE CAUSE REMEDY

Rating

Let us know what you think about the Clarke XEV16-200 Compressor by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke XEV16-200 Compressor?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke XEV16-200 Compressor. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke XEV16-200 Compressor. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke XEV16-200 Compressor in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.