Home > Do-It-Yourself > Compressors > Clarke Compressors > Clarke XEV16-200 Compressor

Manual Clarke XEV16-200 Compressor

Need a manual for your Clarke XEV16-200 Compressor? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

Compressor’s oil

consumption

rising.

Too much oil in compressor. Check oil level 2 or 3 minutes

after stopping.

Leaks around crank case. Contact Clarke Service

Working temperature of

compressor too high because of

insufficient cooling.

Increase ventilation to air

compressor.

Unit too small in proportion to air

consumption.

Connect supplementary.

Semi-automatic unit Load too

small.

Convert to fully automatic

operation.

Cylinder worn Contact Clarke Service

Intake air filter blocked. Clean / Change air filter.

Compressor

runs

continuously

and can’t

attain the

working

pressure

required.

Suction filter blocked. Change filter.

V-belt too slack (not applicable

to direct drive machines).

Tighten V-Belt.

Leak between compressor block

and air receiver/ leaks in or near

air receiver.

Tighten connection and repair

leak or Contact Clarke Service

RPM too low because of

incorrectly connected electric

motor.

Contact Clarke Service

Valves blocked by dirt, paint, dust

or coked up.

Contact Clarke Service

Inspection cover or plug leaking Empty air receiver and

change seal or Contact

Clarke Service

Suction rendered difficult or

impossible at suction intake or the

air being taken in is too warm.

Ensure unobstructed air flow

around the unit.

Pressure gauge defective.

Unit too small in relation to air

consumption of connected

equipment

Install a larger compressor

Compressor worn. Have compressor overhauled

or replace it.

Compressor unit

starts when no

air is being

used.

Leaks in pipework system Locate and repair leaks.

SYMPTOM PROBABLE CAUSE REMEDY

Rating

Let us know what you think about the Clarke XEV16-200 Compressor by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke XEV16-200 Compressor?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke XEV16-200 Compressor. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke XEV16-200 Compressor. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke XEV16-200 Compressor in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.