Home > Do-It-Yourself > Compressors > Clarke Compressors > Clarke XEV16-200 Compressor

Manual Clarke XEV16-200 Compressor

Need a manual for your Clarke XEV16-200 Compressor? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

TROUBLESHOOTING CHART

IMPORTANT!

1. Any remedial work that may be required must be carried out by a qualified

electrician/engineer.

2. Disconnect from the mains supply before removing any parts from the

compressor.

3. Empty Air Receiver of Air before dismantling any part of the compressor

unit’s pressure system.

4. If your compressor develops a fault do not use until the fault has been

rectified.

SYMPTOM PROBABLE CAUSE REMEDY

Compressor will

not start

automatically

Fault in electrical installation Let an electrician check

electrical installation.

Current supply failure.

Voltage drop.

Motor starter faulty.

Motor incorrectly connected or

faulty

Starter overload has tripped

out.

Reset by depressing button.

Pressure switch defective. Have pressure switch

changed by an electrician.

Fuse blown. Check fuse rating - replace.

Compressor unit

will not stop

automatically.

Pressure switch defective. Contact Clarke Service

Fuses keep

blowing.

Inadequate size fuse installed. Replace with reference to

chart See page 6.

Fault in motor. Contact Clarke Service

Bleed valve

under pressure

switch blows

whilst

compressor is

not running

Non-return valve leaking. Clean non-return valve or

replace.

Rating

Let us know what you think about the Clarke XEV16-200 Compressor by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke XEV16-200 Compressor?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke XEV16-200 Compressor. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke XEV16-200 Compressor. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke XEV16-200 Compressor in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.