Home > Do-It-Yourself > Table Saws > Clarke Table Saws > Clarke CTS800C Table Saw

Manual Clarke CTS800C Table Saw

Need a manual for your Clarke CTS800C Table Saw? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

CUTTING TIPS

RIPPING CUTS & CROSS CUTS

Ripping is when you use the saw to cut along the grain of the wood.

The parallel fence must always be used when making ripping cuts.

1. Press one edge of the workpiece

against the parallel fence while

the flat side lies on the saw table.

• The blade guard must always

be lowered over the workpiece

and blade.

• When you make a ripping cut,

never stand in line with the

blade.

2. Set the parallel fence in

accordance with the desired width.

3. Switch on the saw.

4. Place your hands (with fingers closed) flat on the workpiece and push the

workpiece along the parallel fence towards the blade.

5. Guide at the side with your left or right hand (depending on the position of

the parallel fence) only as far as the front edge of the guard hood.

6. Always push the workpiece through to the end of the riving knife using a

push stick.

7. Do not remove the offcut piece until the blade has stopped spinning.

8. Secure long workpieces against falling off at the end of the cut (e.g. with a

roller stand etc).

CUTTING NARROW WORKPIECES

Always use a push stick when the

workpiece is narrow and for holding

the workpiece flat on the table.

IMPORTANT: Take extra care to keep

you thumbs away from the saw

blade when feeding the workpiece

past the blade.

Rating

Let us know what you think about the Clarke CTS800C Table Saw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CTS800C Table Saw?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CTS800C Table Saw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CTS800C Table Saw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CTS800C Table Saw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.