Home > Do-It-Yourself > Table Saws > Clarke Table Saws > Clarke CTS800C Table Saw

Manual Clarke CTS800C Table Saw

Need a manual for your Clarke CTS800C Table Saw? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ADJUSTMENTS

After every new adjustment, we recommend you to make a trial cut in order

to check the new settings.

PARALLEL FENCE

The parallel fence can be mounted on either side of the table. If you change

the side, you will need to fit the fence the other way round.

1. Engage the parallel fence over

the ends of the table.

2. Use the scale on the table to set

the parallel fence to the required

distance from the blade.

3. Lock the parallel fence in the

required position by tightening the

knob at each end.

MITRE GAUGE

1. Insert the guide bar into the

groove in the table top.

2. Loosen the knob to set the angle

required.

3. Rotate until the pointer points to

the angle on the scale you want.

4. Retighten the knob.

• If required you can remove the

fence from the mitre assembly using the 2 locking knobs, or slide it in

either direction to suit the task before re-tightening.

SETTING THE BLADE ANGLE

1. Release the bevel locking handle.

2. Tilt the saw blade and motor

assembly until the saw blade is at

the desired angle.

3. Tighten the bevel lock to lock the

blade at the required angle

shown on the scale.

Rating

Let us know what you think about the Clarke CTS800C Table Saw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CTS800C Table Saw?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CTS800C Table Saw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CTS800C Table Saw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CTS800C Table Saw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.