Home > Do-It-Yourself > Table Saws > Clarke Table Saws > Clarke CTS800C Table Saw

Manual Clarke CTS800C Table Saw

Need a manual for your Clarke CTS800C Table Saw? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

When not in use, place the push stick

in its storage clip on the side of the

saw.

Replace a damaged push stick

immediately.

MITRE CUTS

1. Slide the mitre gauge into the

groove in the table.

2. Adjust the mitre gauge to the

required angle.

3. Press the workpiece firmly against

the mitre gauge.

4. Switch on the saw.

5. Push the mitre gauge and the

workpiece toward the blade to

make the cut.

IMPORTANT: Always hold the guided part of the workpiece. Never hold the

part which is to be cut off.

6. Push the mitre gauge forward until the workpiece is cut all the way

through.

7. Switch off and do not remove the offcut until the blade has stopped

turning.

BEVEL CUTS

Bevel cuts must always be made using the parallel fence.

1. Undo the bevel lock levers at

each end of the saw.

2. Set the saw to the desired angle

on the scale.

3. Tighten the bevel locks to lock the

blade at the selected angle.

4. Set the parallel fence.

5. Perform the cut as you would for

a ripping cut.

NOTE: If precision is required, use a protractor between the blade and table.

Rating

Let us know what you think about the Clarke CTS800C Table Saw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CTS800C Table Saw?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CTS800C Table Saw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CTS800C Table Saw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CTS800C Table Saw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.