Home > Do-It-Yourself > Generator > Zipper Generator > Zipper ZI-STE1200IV Generator

Manual Zipper ZI-STE1200IV Generator

Name: Zipper ZI-STE1200IV Generator
Brand: Zipper
SKU: ZI-STE1200IV
Rating: 49 (35 reviews)

Need a manual for your Zipper ZI-STE1200IV Generator? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 16 comments and has 35 votes with an average product rating of 49/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Edition: 29.01.2016 – Revision - 00 – CEC - DE/EN

Originalfassung

BETRIEBSANLEITUNG

STROMERZEUGER

Übersetzung / Translation

USER MANUAL

GENERATOR

ACHTUNG: Öl (SF 15W40) kontrollieren!

ATTENTION: Check Oil (SF 15W40)!

ZI-STE1200IV

EAN: 9120039232256

Download manual in English (PDF, 2.76 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Zipper ZI-STE1200IV Generator by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Zipper ZI-STE1200IV Generator?
Yes No

49%

51%

35 votes

Join the conversation about this product

Here you can share what you think about the Zipper ZI-STE1200IV Generator. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

Gerd HEILMANN 28-09-2019
Dear Sir or Madam, my zipper generator 1200 watts does not provide any electricity. It runs but the green LED flashes and there is no power. What can I do. Device was bought, tested, but never used in May 2019.

reply | This was helpful (98) Read more (Translated by Google)

Christian 06-10-2020
Same problem with me. Is there a solution in the meantime?

This was helpful (28) (Translated by Google)

Mario Franzke 12-06-2019
Dear ladies and gentelman In the hope of buying a decent product, I bought a Zipper inverter power generator ZI-STE1200IV 1.2 kW and was immensely vented. After it was really on tour after an hour, the error message Overload there wasn't even a cable in the power generator's socket, the manual doesn't say anything about how to fix this error. is there any possibility at all? Yours sincerely, Mario Franzke

reply | This was helpful (81) Read more (Translated by Google)

Bernd 18-09-2019
same problem

This was helpful (36) (Translated by Google)

Sascha dankwart 24-08-2020
Hello My device zipper zi¬ste 1200 iv But there is no current running Green led flashes

reply | This was helpful (36) Read more (Translated by Google)

Max Kannlesen 22-07-2021
If you set the choke to open, the unit can also produce electricity. It says so in the manual, with cheap products this is often the wrong way to open or close the choke switch.

This was helpful (15) (Translated by Google)

Hees Gilbert 11-09-2019
I'm disappointed always shows a short circuit. Don't know how to fix it

reply | This was helpful (30) Read more (Translated by Google)

Hans 22-07-2021
I would try a ground feed. And check the connected devices.

This was helpful (1) (Translated by Google)

Jens Peter 07-04-2020
Hi there, Device does not start. Candle, air filter checked. No possibility to check the oil level, since according to the description the device will not start if the oil level is too low. No oil filler plug. Drain plug only. To refill oil, if necessary, the device must be turned upside down and petrol will run out. You surely have a workable solution. Kind regards J. Peter

reply | This was helpful (29) Read more (Translated by Google)

Max Kannlesen 22-07-2021
The oil filler plug is just below .. if you read the manual you could also learn how it works.

This was helpful (6) (Translated by Google)

xavier 07-01-2020
if the green light is blinking what is the problem and there is no power?

reply | This was helpful (9) (Translated by Google)

Jan Ertmann 18-09-2021
After less than 10 hours of operation and a subsequent downtime of around 9 months, it will no longer start. Spare parts are. accessible. . The support was pretty bad. When I received a request with a description of the problem, the answer was that I should top up the oil. No sooner said than done, maybe there is a sensor that should prevent it from running dry, but no success, now the exchange of the ignition electronics and the ignition coil and spark plug took place, unfortunately also without success In the meantime

reply | This was helpful (7) (Translated by Google)

Nicolae Serban 30-12-2022
Hello! I have a generator ZIPPER Inverter 1200 W, starts but does not remove the required voltage. only 10 volts. I mention that it stayed unused a year . Thanks! with esteem Serban N, Tulcea.

reply | This was helpful (3)

StevieB 07-04-2022
From new only been run for 30 mins. Now with fresh E5 fuel it still starts easily but refuses to run normally unless choke is set at 90 to 100% closed. Its really almost new but hasn't been used for a while. The tank was emptied and fresh unleaded E5 filled. It seems to me be a mixture richness error, probably too lean. No info in manual how to tune. Anyone help?

reply | This was helpful (1) Read more

StevieB 07-04-2022
I still have a £200 new generator that wont keep running.

This was helpful (1)

Jörg 08-09-2022
Hello, I'm looking for the correct name for the spark plug of the ZI-STE1200IV - power generator. I can't find it in the owner's manual. Thanks in advance for the info.

reply | This was helpful (0) (Translated by Google)

More about this manual

We understand that it’s nice to have a paper manual for your Zipper ZI-STE1200IV Generator. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Zipper. They might be able to provide an original manual. Are you looking for the manual of your Zipper ZI-STE1200IV Generator in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.