Home > Household appliances > Cooker Hoods > Zanussi Cooker Hoods > Zanussi ZHP612WM Cooker Hood

Manual Zanussi ZHP612WM Cooker Hood

Need a manual for your Zanussi ZHP612WM Cooker Hood? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Part 1 - INSTALLATION INSTRUCTIONS

1 - GENERAL INFORMATION

This cooker hood is designed to be fitted into the bottom of a cabinet positioned over a cooking area.

It must be connected to a remote blower, which may be positioned either inside or outside the home.

Before starting the installation, consideration should be given to the difficulties to be found during

installation. The installation work must be undertaken by a qualified and competent person in

conformity to the rules concerning the evacuation of contaminated air.

The manufacturer disclaims all liability for any damage or injury caused as a result of not following

the instructions for installation contained in the following text.

2 - SAFETY WARNINGS

2.1- When used in the extraction mode, the cooker hood ducting must not be connected to a

flue which is used for exhausting fumes from appliances supplied with energy other than

electric, such as a central heating flue or water heating flue.

2.2- Before connecting to the mains supply ensure that the mains voltage corresponds with

the voltage on the rating plate inside the hood.

2.3- Connect the cooker hood to the mains via a bipolar switch which has 3 mm clearance

between the contacts.

2.4- The appliance must be earthed.

2.5- When installed, the hood must be positioned at least 65 cm above the hotplate.

2.6- Never do flambé cooking under this cooker hood.

2.7- Never leave frying pans unattended during use as overheated fat and oil may catch fire.

2.8- Before carrying out any kind of maintenance or cleaning, disconnect the hood from the

mains supply.

2.9- If the room where the cooker hood is to be used contains a fuel burning appliance such

as a central heating boiler then this must be of the room sealed or balanced flue type. If

other types of flue or appliance are fitted, ensure that there is an adequate supply of air

into the room. When the cooker hood is used in conjunction with appliances supplied

with energy other than electric, the negative pressure in the room must not exceed 0,04

mbar to prevent fumes being drawn back into the room by the cooker hood.

3 - INSTALLATION

3.1 - Installation with screws

1 - The bottom of the cabinet must be placed at 135mm from the lower edges (fig. 1).

2 - The installer may choose one of the two sets of pre-drilled holes on the upper part of the canopy

hood (fig. 2).

3 - Drill 4.5mm Ø holes on the bottom of the cabinet in line with the chosen set of holes.

4 - Fix the cooker hood by using 4,2x44,4 four screws supplied (fig. 3).

Rating

Let us know what you think about the Zanussi ZHP612WM Cooker Hood by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Zanussi ZHP612WM Cooker Hood?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Zanussi ZHP612WM Cooker Hood. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Zanussi ZHP612WM Cooker Hood. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Zanussi. They might be able to provide an original manual. Are you looking for the manual of your Zanussi ZHP612WM Cooker Hood in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Zanussi
Model	ZHP612WM
Category	Cooker Hoods
File type	PDF
File size	0.16 MB

All manuals for Zanussi Cooker Hoods
More manuals of Cooker Hoods

Frequently Asked Questions about Zanussi ZHP612WM Cooker Hood

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How much distance should there be between my cooker hood and my hob? Verified

This can very a bit depending on the brand, but in general a cooker hood should be placed at least 65 centimeter above a gas hob and at least 50 centimeter above an electric or induction hob. This is to improve fire safety

This was helpful (1213) Read more

Do I need a cooker hood with or without motor? Verified

Cooker Hoods with motor are meant for when the air is moved directly outside. A cooker hood without motor is meant for when there is a central ventilation system. Never connect a cooker hood with motor to a central ventilation system!

This was helpful (635) Read more