Home > Household appliances > Washer-Dryers > Zanussi-Electrolux Washer-Dryers > Zanussi-Electrolux ZWD1470W Washer-Dryer

Manual Zanussi-Electrolux ZWD1470W Washer-Dryer

Need a manual for your Zanussi-Electrolux ZWD1470W Washer-Dryer? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Water inlet

Connect the hose supplied with the machine to a tap

with a 3/4” thread.

Do not use already employed hoses.

Installation should comply with local water authority

and building regulations’ requirements.

The appliance must be connected to a cold water

supply only.

A minimum water pressure of 50 kPa (0.5 bar) is

required for safe operation of the appliance.

If you cannot make the cold water connection direct

from the rising mains, you may be able to operate the

appliance from your cold water storage system.

There should be a minimum distance of 5.02m

(161/2 ft) between the appliance’s inlet and the bottom

of the water storage tank.

Set the hose correctly by loosening the ring nut. After

positioning the inlet hose, be sure to tighten the ring nut

again to prevent leaks.

Water drainage

This appliance is designed to be permanently plumbed

into your home's drainage system using one of the

following methods.

1. Into a drainage standpipe.

Firstly form a hook in the end of the drain hose using

the “U” piece” supplied.

P0021

P1088

Place the drain hose into your standpipe, which should

have an internal diameter of approximately 38mm thus

ensuring there is an air break between the drain hose

and standpipe.

When discharging into a standpipe ensure that the top of

the standpipe is no more than 90cm (35.4'') and no less

than 60cm (23.6'') above floor level.

The drain hose may be extended to a maximum of 4

metres. An additional drain hose and joining piece is

available from your local Service Force Centre.

The joining piece must have an internal diameter of

18mm.

2. Onto a sink outlet spigot.

If the outlet spigot has not been used before, remove

any blanking plug that may be in place.

P1197

P1201

3 pin

Min. 60 cm (23.6)

Max. 90 cm (35.4)

P1200

30 cm (12")

38 mm (11.2)

standpipe

diameter

U piece

supplied

P1199

Rating

Let us know what you think about the Zanussi-Electrolux ZWD1470W Washer-Dryer by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Zanussi-Electrolux ZWD1470W Washer-Dryer?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Zanussi-Electrolux ZWD1470W Washer-Dryer. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Zanussi-Electrolux ZWD1470W Washer-Dryer. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Zanussi-Electrolux. They might be able to provide an original manual. Are you looking for the manual of your Zanussi-Electrolux ZWD1470W Washer-Dryer in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Zanussi-Electrolux
Model	ZWD1470W
Category	Washer-Dryers
File type	PDF
File size	0.55 MB

All manuals for Zanussi-Electrolux Washer-Dryers
More manuals of Washer-Dryers

Frequently Asked Questions about Zanussi-Electrolux ZWD1470W Washer-Dryer

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

My washer-dryer makes a lot of noice and/or vibrates loudly, what can I do about that? Verified

It's possible that the washer-dryer has not been leveled. You can do this by adjusting the feet to make it perfectly level. The problem can also be caused by inserting to much clothes in the machine. If these are not the cause of your problem you should contact the manufacturer.

This was helpful (1313) Read more

My washer-dryer smells, what can I do about it? Verified

There are washer-dryers with self-cleaning features. If these features are not available it's possible to add 100ml of white vinegar or 100gr of soda crystals and have the washer-dryer run a 90 ℃ program.

This was helpful (608) Read more

What is the difference in usage between a washer-dryer and a separate washing machine and dryer? Verified

The biggest advantage of a washer-dryer is that it takes less space. However, a separate dryer will be able to dry more than a washer-dryer. A washer-dryer also uses relatively more energy and requires more time.

This was helpful (347) Read more

Can I connect a washer-dryer to an extension cord? Verified

Appliances that require large amounts of power, like a washer-dryer, can not be connected to all extension cords. See what the power usage of the washer-dryer is, which is indicated in Watt, and check if the extension cord can handle this. There are extension cords with thicker cables that are made to handle larger appliances.

This was helpful (296) Read more