Manual Wynnster Shrike 6 Tent

Need a manual for your Wynnster Shrike 6 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

ASSEMBLY INSTRUCTIONS:
SHRIKE 6
Please read the General Information before starting and famil-
iarise yourself with each of the component parts. Please refer to
the diagrams as you proceed.
Your tent comprises the following parts: (As you unpack
the component parts make a mental note of how the tent was
packed in the carry bag as this will help you when you come to
repack it.)
TAKE EXTRA CARE AND PRECAUTIONS ON WINDY
DAYS SO THAT THE TENT DOES NOT BECOME DAM-
AGED.
COMPONENT PARTS
1. The ysheet, which is the PU coated shell of the tent that
features the pole sleeves, clip on storm cap that protects the top
mesh ventilation panels, attached guy ropes etc.
2. The inner tent or sleeping compartment, which has an inte-
gral groundsheet & a “D”, shaped door with secondary mesh in-
sect proof ventilation panel. Attached to the inner is an “apron”
style ground sheet for the entrance to the tent.
3. A pole bag that contains 3 breglass poles that are strung
in sections on elasticated shock cord; the mid section of each
pole is
colour coded to match with coloured taping on its correct pole
sleeve.
4. A peg bag that contains sufcient pegs to erect the tent.
5. An emergency Repair Kit that contains fabric cuttings, seam
sealant, spare pegs & guy rope, peg point elastic and an emer-
gency pole repair sleeve.
AS THE ASSEMBLY PROCESS REQUIRES THE POLES
AND OTHER COMPONENT PARTS TO BE PUT UNDER
TENSION, CARE MUST BE TAKEN AT ALL TIMES TO
PREVENT PERSONAL INJURY OR HARM TO OTHERS.
ASSEMBLY INSTRUCTIONS
1.Having selected your site, unfold the ysheet ensuring the
doors are zipped closed and orientate it so that where possible
they face away from the prevailing wind.
2. Unfold the breglass pole sections and gently slot them to-
gether to form 3 complete poles that are all the same length.
3. Taking the assembled poles in turn, gently PUSH them thro
ugh the pole sleeves in the
ysheet with the same colour
taping as the mid section of
the pole (see Figure 1). The
storm cap that is attached to
the main diagonal pole sleeves
on the ysheet may need to be
unfastened so that the poles
may be readily installed. Re-
member to re-clip the storm cap before proceeding. Where pos-
sible avoid standing on the ysheet, as this will damage it. Do
not continue until all the poles have been pushed through the
sleeves in the ysheet.
Always push the poles, never pull them otherwise the sections
will come apart and the elastic shock cord will break.
4. Starting with the crossing
diagonal poles, insert one end
into the eyelet in the webbing
tab at the base of and nearest
to the ysheet (the other is for
the peg) and repeat with the
other end, by grasping the web-
bing tab rmly and pushing the
pole through the sleeve (see gure 2). To achieve this the pole
sleeves must be eased over the poles, especially over the metal
joints or ferrules and this process would be greatly eased if the
ysheet is lifted and supported from inside. Repeat with the
remaining poles.
5. Before starting to put in the pegs, check that the tent’s posi-
tion is acceptable, adjusting if necessary. Initially only a few
pegs should be put in, enough to give the tent it’s rough shape
and none under any great tension. This will signicantly ease
the installation of the inner sleeping compartment.
6. Gather up the inner
tent, ensuring its doors are
closed, and take it inside
the ysheet. Start at the
rear edge of the inner and
clip the hooks that are on
the corners of the ground-
sheet to the “D” rings
located on the edge of the
ysheet (see gure 5).
7. Then, working systemati-
cally, using the hooks attach
the inner to the eyelets lo-
cated on a fabric tabs sewn to
the inside of the ysheet (see
gure 3).
8. The apron style ground-
sheet that is sewn to the front
edge of the inner sleeping compartment attaches to “D” rings on
the ysheet using clips along its edge.
9. Once the inner has been suspended, re-adjust the tension on
the pegs already in position followed by the remaining pegs.
Remember to angle the pegs away from the tent. This must be
done systematically so that the tent ends up being symmetri-
cally pitched, taking care to balance the tension at each point so
that the tents fabric is stretched evenly.
10. Unravel the guy ropes
and loosely peg out each
one ensuring that they are
all pegged directly in line
with the seam or pole to
which they will apply ten-
sion and support. Once this
is achieved tighten the ad-
justers so that equal tension
is applied to each guy point
(see gure 4).
11. The doors may be rolled back and secured using the con-
veniently located ties.
HOW TO TAKE DOWN YOUR TENT
1. For your convenience if you are simply moving site the in-
ner sleeping compartment can remain in place and the tent re-
pitched “as one” to save time.
2. Please note that the pegs should be extracted by either using a
tent peg extractor or more simply by using another peg. Do not
pull them out by using the guy rope or the elastic.
AGAIN TAKING EXTRA CARE AND PRECAUTIONS ON
WINDY DAYS SO THAT THE TENT DOES NOT BECOME
DAMAGED.
3. Unclip the communal apron ground sheet and then unclip and
remove the inner sleeping compartment.
4. Unpeg the guy ropes, slide the adjuster up to the ysheet and
neatly tie them up to prevent them becoming tangled.
5. Unpeg the ysheet and remove the pole ends from the eyelets
taking great care, as these will be under tension. Keep them
away from your face and children at a safe distance.
6. Gently PUSH the poles through the sleeves in the ysheet.
7. Remove the ends of the other poles from the eyelets again
taking great care, as these will be under tension. Keep them
away from your face and children at a safe distance.
8. Gently PUSH the poles through the pole sleeves in both the
ysheet.
9. To pack the poles away, simply pull each of their sections
apart and fold up and store them in their carry bag. Collect the
pegs together, cleaning them as you go, and put them in their
storage bag.
10. Ensuring that the tent is thoroughly dry if it is to be stored
for some time, pack the tent away into its carry bag. The easiest
way to achieve this is to individually fold the inner tent and the
ysheet to the rough width of the carry bag and lay them on
top of each other. Then slowly roll them up around the poles,
ensuring that as much of the trapped air as possible is squeezed
out. The more slowly & tightly this is done the easier it will be
to get it back into the carry bag.
11. If the tent is wet or dirty when you temporarily pack it away
remember to fold “wet to wet” and “dry to dry”, as this will help
reduce the soiling of the inner tent etc.
GENERAL INFORMATION
The following tips and information may help make your trip
more enjoyable.
BEFORE USING YOUR TENT.
1. Get to know your tent before your trip by practising pitch-
ing and familiarising yourself with its component parts and
features. This will also double check that it is complete and
undamaged and will not spoil your holiday.
2. Whilst there is a small repair kit included with the tent, it con-
tains only basic items so it may be worth considering taking a
more comprehensive kit; such spares are available through your
local Wynnster stockist. It is also advisable to assemble a spares
and tool kit so that should any accidental breakage occur then
this will enable the repair to be effected without delay. Items
that should be considered are: additional pegs (to cover varying
soil types such as very hard ground or even loose sandy soils);
extra/spare guy ropes (to cover losses or to be used in adverse
weather conditions to strengthen the structure); extra seam
sealer (as whilst every effort has been taken to ensure that they
are adequately taped, leakage may develop during heavy or pro-
longed rainfall); spare pole sections; shock cord elastic etc.
3. A multi tool of some description (or pliers, a pen knife and
a junior hack saw), plus a roll of water proof tape and some
quick drying, multi-purpose glue will get you out of most dif-
culties.
4. A rubber mallet will help you cope with very hard ground
plus a tent peg extractor for the end of your holiday.
5. We suggest that you have some form of insurance cover
against theft, accidental or storm damage.
Should you have any queries then in all instances these must be
directed to the retailer from whom the tent was purchased.
CHOOSING A SITE.
1. Ideally this should be as at as possible for both your comfort
and the stability of the tent.
2. Avoid low lying ground or other such areas that may ood
in heavy rain, the presence of long green grass will help you
spot these places.
3. It should also be clear of any object that may puncture the
ground sheet or give you discomfort in the night.
4. Avoid pitching under trees as they may drip sap or water
(long after the rain has stopped falling) and aim for sites that
are in shadow at the height of the day as you may wish for some
shade during the hotter months. For extended use it is advisable
to seek a shady site, as most tent materials will be weakened
by prolonged exposure to strong sunlight; this is manifested in
a fading of colour and a weakening of the fabric. The amount
of fading in not an indicator of the degree of weakening. The
polyester fabric used in the manufacture of this tent as opposed
to nylon will deteriorate is signicantly more resistant to the
affects of ultraviolet light.
5. Make use of natural windbreaks such as walls and hedges etc,
avoiding exposed and or high level site that may cause prob-
lems in the event of high winds, as a tent of this size offers a
very large prole to the wind.
6. For Fire Safety it is advisable to site your tent at least 6 me-
tres from adjacent tents.
ERECTING YOUR TENT.
1. Whenever possible try to pitch the tail or the lowest part of
the tent into the wind as this will help the wind blow over the
structure more easily, and with the door facing away from the
wind so that rain cannot be blown inside.
2. As the assembly process requires the poles and other com-
ponent parts to be put under tension, care must be taken at all
times.
3. If pitching the tent in windy conditions then extra care and
precautions must be taken to guard against personal injury and
to ensure the tent does not become damaged. Whilst the poles
are being installed the ysheet may need to be pegged down
so that it is not blown away. The most critical point when most
damage occurs is when the poles have been fully installed but
before the pegs have been fully put in; emergency but tempo-
rary guying and pegging may be required at this stage. Try and
enlist the help of fellow campers if you are having difculties.
4. Pitch with all zips closed and drive all pegs in at an angle
(ideally of 45° or less to the horizontal) and in line with the
seams. Do not overstretch the elasticated peg loops but apply
sufcient pressure to tension the fabric; spend a little time to
make sure all are correctly positioned. Do not peg the ground
sheet down too tightly and if possible lay a polythene sheet (or
similar such as Damp Proof Membrane material available from
builders merchants) underneath, as this will extend the life of
the tent’s groundsheet and help keep it clean. Furthermore this
will help alleviate the build up of condensation by blocking the
evaporation of moisture from the ground.
IN USE.
1. Keep the exit(s) clear and free from obstruction to prevent
accidental damage to you and the tent, especially in an emer-
gency.
2. To help keep the doors closed, cross over the peg points at the
base of zips on the ysheet. Avoid treading on the zips and keep
them free from dirt, as this will maintain their smooth opera-
tion. Should the zips become difcult to operate: do not force
them but adjust the pegging/guying of the tent to ease the pres-
sure on them and lubricate with a silicon or similar lubricant to
maintain their smooth operation. Specialist products are avail-
able from your Camping retailer.
3. Even though the tent’s outer fabric has been coated to provide
protection from the weather it will stop moisture vapour that is
inside from escaping. This may result in water droplets appear-
ing on its inner surface as condensation.
Condensation may come from moisture contained in the ground
or expired from the occupants of the tent and held in the air as
humidity, and it is most likely to appear upon the onset of rain,
as this will rapidly chill the ysheet fabric. This may also hap-
pen at night time when the outside air temperature drops. These
droplets may fall from the ysheet and this cannot altogether be
avoided but it can certainly be alleviated.
To help prevent this, increase ventilation as much as possible
by opening vents and zips and promoting a ow of air under
the ysheet. Cooking and lighting are also sources of conden-
sation particularly if using fossil fuels such as gas, petrol or
parafn; therefore it is obviously best to cook outside when the
weather allows or in an alternative structure (and also from a
safety point of view). Condensation should not be confused
with leakage.
4. Periodically check each peg point and re adjust as necessary,
especially during/after stormy weather. In adverse weather con-
ditions extra precautions will need to be taken; more guy lines
may be needed to strengthen the structure; more or alternative
types or sizes of pegs may be required especially if the ground
is soft or becomes saturated, double pegging some points as
necessary; the communal area groundsheet may need to be un-
clipped in the doorways and folded back to prevent rainwater
running back into the tent.
5. FIRE WARNING: The Fire Retardant fabrics that are used
for the groundsheet, inner, mesh ventilation panels and ysheet
of this tent will signicantly reduce the rate of ame propaga-
tion, but the tent is still ammable.
• Keep naked ames and other heat sources well away from all
the tent’s fabrics.
Do not rell stoves or change fuel cartridges inside or near
to the tent.
• Never leave heating, lighting or cooking appliances unat-
tended in the vicinity of the tent.
- Think safety rst –
STORAGE & MAINTENANCE.
1. NEVER store the tent unless it is completely dry. Storing
when damp allows the formation of mildew which will damage
the tent. Clean all components and store seperately.
2. Light soiling may be removed either by the gentle use of a
soft brush or a soft, dampened cloth. Never use detergents or
wash in a washing machine, as this will damage the waterproof
coatings.
3. Should the tent show signs of leakage along any of the y-
sheet seams, the inner tent suspension points, lantern loops etc,
seam sealant should be applied. A tube may be found in the
repair kit with replacements readily available from your Out-
door Leisure retailer.
4.Tears and holes from accidental damage or otherwise may be
repaired. Please contact your local Camping retailer from your
nearest specialist repairer.
Download manual in English (PDF, 0.76 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Wynnster Shrike 6 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Wynnster Shrike 6 Tent?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Wynnster Shrike 6 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Wynnster Shrike 6 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Wynnster. They might be able to provide an original manual. Are you looking for the manual of your Wynnster Shrike 6 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Wynnster
Model Shrike 6
Category Tents
File type PDF
File size 0.76 MB

All manuals for Wynnster Tents
More manuals of Tents

Frequently Asked Questions about Wynnster Shrike 6 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more
Manual Wynnster Shrike 6 Tent