Home > Do-It-Yourself > Heat Guns > Weldy Heat Guns > Weldy HG 330-B Heat Gun

Manual Weldy HG 330-B Heat Gun

Need a manual for your Weldy HG 330-B Heat Gun? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Original Operating Manual

DANGER! Danger when opening up the tool, as live parts are exposed. Before opening, unplug the tool to ensure disconnection

from the mains.

Before

putting into operation, check power supply cord and connector as well as extension cable for electrical and

mechanical damage.

Incorrect use of the Hot Air Tool (eg. overheating of the material) can cause a ﬁre and explosion hazard, especially near

combus t ible materials and explosive gases. Do not apply to the same place for a long time. Heat can ignite ﬂammable materials

which are not in view.

Fire and burn hazard! Do not touch the heating element housing and air nozzle

when they are hot as they can cause burns.

Let the tool cool down. Do not point the hot air ﬂow in the direction of people or animals

Before replacing a nozzle or storage after use, place the tool vertical down on its standing surface and allow it to cool down completely.

If the Hot Air Tool switches o autonomously in operation (thermal relay), switch tool o or disconnect the power supply from mains.

Before reusing, let the tool cool down.

The voltage rating stated on the tool must correspond to the mains voltage. EN 61000-3-11; Z

max

= 0.215 Ω + j 0.134 Ω.

If necessary, consult supply authority.

For personal protection on building sites we strongly recommend the tool be connected to a

RCCB (Residual Current Circuit Breaker).

The tool must be operated under supervision.

This tool may be used by children aged 8 or above and by persons with reduced physical, sensory or mental capabilities or

lack of experience and knowledge if they are supervised or have been given instructions on how to use the tool safely and

understand the hazards involved. Do not allow children to play with the tool. Children are not allowed to clean or carry out

maintenance work on the tool without supervision.

Protect tool from damp and wet.

Repairs should only be carried out by authorized service points. Restricted to use with original accessories and spare

parts.

Warning

Caution

Rating

Let us know what you think about the Weldy HG 330-B Heat Gun by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Weldy HG 330-B Heat Gun?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Weldy HG 330-B Heat Gun. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Weldy HG 330-B Heat Gun. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Weldy. They might be able to provide an original manual. Are you looking for the manual of your Weldy HG 330-B Heat Gun in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Weldy
Model	HG 330-B
Category	Heat Guns
File type	PDF
File size	3.03 MB

All manuals for Weldy Heat Guns
More manuals of Heat Guns

Frequently Asked Questions about Weldy HG 330-B Heat Gun

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What are the signs of a heat gun malfunction? Verified

Signs of a heat gun malfunction include a lack of heat, a decrease in heat output, an unusual smell, or sparks coming from the heat gun. If you notice any of these signs, unplug the heat gun and stop using it.

This was helpful (51) Read more

How can I prevent damage to the surface I am using the heat gun on? Verified

To prevent damage to the surface, it is important to keep the heat gun moving and to hold it at the proper distance from the surface. Also, It is advisable to use a lower temperature setting when working with delicate materials and to use a heat-resistant shield.

This was helpful (42) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (8) Read more