Home > Do-It-Yourself > Heat Guns > Weldy Heat Guns > Weldy HG 330-B Heat Gun

Manual Weldy HG 330-B Heat Gun

Need a manual for your Weldy HG 330-B Heat Gun? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Original Operating Manual

Important safety instructions

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk

of electric shock, this plug is intended to ﬁt in a polarized outlet only one way. If the plug

does not ﬁt fully in the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed

electrician. Do not modify the plug in any way.

Hidden areas such as behind walls, ceilings, ﬂoors, sot boards and other panels may

con-tain ﬂammable materials that could be ignited by the heat gun when working in these

loca-tions. The ignition of these materials may not be readily apparent and could result in

property damage and injury to persons.

When working in these locations, keep the gun moving in a back-and-forth motion. Lingering

or pausing in one spot could ignite the panel or the material behind it.

Read these instructions

Warning: Extreme care should be taken when stripping paint. The peelings, residue and

vapors of paint may contain lead, which is poisonous. Any pre-1977 paint may contain

lead and paint applied to homes prior to 1950 is likely to contain lead. Once deposited on

surfaces, hand to mouth contact can result in the ingestion of lead. Exposure to even low

levels of lead can cause irreversible brain and nervous system damage; young and unborn

children are particularly vulnerable.

Before beginning any paint removal process you should determine whether the paint you

are removing contains lead. This can be done by your local health department or by a

professional who uses a paint analyzer to check the lead content of the paint to be removed.

LEAD-BASED PAINT SHOULD ONLY BE REMOVED BY A PROFESSIONAL AND SHOULD

NOT BE REMOVED USING A HEAT GUN.

Persons removing paint should follow these guidelines:

1. Move the work piece outdoors. If this is not possible, keep the work area well ventilated.

Open the windows and put an exhaust fan in one of them. Be sure the fan is moving

the air from inside to outside.

2. Remove or cover any carpets, rugs, furniture, clothing, cooking utensils and air ducts.

3. Place drop cloths in the work area to catch any paint chips or peelings. Wear protective

clothing such as extra work shirts, overalls and hats.

4. Work in one room at a time. Furnishings should be removed or placed in the center of

the room and covered. Work areas should be sealed o from the rest of the dwelling

by sealing doorways with drop cloths.

5. Children, pregnant or potentially pregnant women and nursing mothers should not be

present in the work area until the work is done and all clean up is complete.

6. Wear dust respirator mask or a dual ﬁlter (dust and fume) respirator mask which has

been approved by the Occupational Safety and Health Administration (OSHA), the

National Institute of Safety and Health (NIOSH), or the United States Bureau of Mines.

These masks and replaceable ﬁlters are readily available at major hardware stores.

Be sure the mask ﬁts. Beards and facial hair may keep masks from sealing properly.

Change ﬁlters often. DISPOSABLE PAPER MASKS ARE NOT ADEQUATE.

7. Use caution when operating the hot air tool. Keep the heat gun moving as excessive

heat will generate fumes which can be inhaled by the operator.

8. Keep food and drink out of the work area. Wash hands, arms and face and rinse mouth

before eating or drinking. Do not smoke or chew gum or tobacco in the work area.

9. Clean up all removed paint and dust by wet mopping the ﬂoors. Use a wet cloth to clean

all walls, sills and any other surface where paint or dust is clinging. DO NOT SWEEP,

DRY DUST OR VACUUM. Use a high phosphate detergent or trisodium phosphate (TSP)

to wash and mop areas.

10. At the end of each work session put the paint chips and debris in a double plastic bag,

close it with tape or twist ties and dispose of properly.

11. Remove protective clothing and work shoes in the work area to avoid carrying dust

into the rest to the dwelling. Wash work clothes separately. Wipe shoes o with a wet

rag that is then washed with the work clothes. Wash hair and body thoroughly with

soap and water.

SAVE THESE INSTRUCTIONS

Rating

Let us know what you think about the Weldy HG 330-B Heat Gun by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Weldy HG 330-B Heat Gun?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Weldy HG 330-B Heat Gun. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Weldy HG 330-B Heat Gun. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Weldy. They might be able to provide an original manual. Are you looking for the manual of your Weldy HG 330-B Heat Gun in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Weldy
Model	HG 330-B
Category	Heat Guns
File type	PDF
File size	3.03 MB

All manuals for Weldy Heat Guns
More manuals of Heat Guns

Frequently Asked Questions about Weldy HG 330-B Heat Gun

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What are the signs of a heat gun malfunction? Verified

Signs of a heat gun malfunction include a lack of heat, a decrease in heat output, an unusual smell, or sparks coming from the heat gun. If you notice any of these signs, unplug the heat gun and stop using it.

This was helpful (51) Read more

How can I prevent damage to the surface I am using the heat gun on? Verified

To prevent damage to the surface, it is important to keep the heat gun moving and to hold it at the proper distance from the surface. Also, It is advisable to use a lower temperature setting when working with delicate materials and to use a heat-resistant shield.

This was helpful (42) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (8) Read more