Home > Camping & Outdoor > Tents > Vango Tents > Vango Valetta II 300 Tent

Manual Vango Valetta II 300 Tent

Need a manual for your Vango Valetta II 300 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 1 comment and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

INSTRUCTIONS DE MONTAGE – VALETTA II (FR)

Montage en commençant par le double toit

1. Réunir les arceaux et les poser parallèlement au sol (3 arceaux – 2 plus longs et 1 arceau plus court, pour le porche) Les mâts et les

entrées de manche qui leur correspondent sont codifiés par couleurs

2. Déferler le double toit et orienter dans le sens requis

3. Placer les fourreaux d'arceau sur le double toit et insérer les arceaux, un à la fois. Placer une extrémité de chaque arceau à l'intérieur

de son système de verrouillage correspondant, sur le double toit.

4. Pousser chaque arceau diagonal à l'intérieur d'une arche, depuis l'extrémité opposée et placer les extrémités des arceaux dans leurs

systèmes de verrouillage respectifs.

5. Attacher les points de fixation aux deux coins d'une seule extrémité de la tente, à l'aide des piquets fournis.

6. Tirer sur le double toit pour le tendre, dans le sens opposé aux points de fixation, jusqu'à ce que la tente prenne sa forme. Attacher

les deux points de fixation élastiques, à l'opposé, à l'aide des piquets. S'assurer que la tente forme une ligne droite.

7. Fixer au sol les arceaux, en les insérant dans les anneaux de métal et les points de fixation du double toit, restant libres.

8. Attacher TOUTES les cordes de tension.

Attacher la tente antérieure

1. Déferler la tente intérieure sous le double toit et orienter les portes selon le compartiment

2. Commençant par les coins arrière, attacher les crochets élastiques du tapis de sol

3. Faire pendre la tente intérieure en attachant les crochets de celle-ci aux anneaux intérieurs du double toit. Commencer par derrière et

travailler vers l'avant

4. Attacher les crochets placés sur le sol du porche aux anneaux correspondants, sur la base du double toit.

5. Attacher le sol du porche à l'aide des crochets, à attacher aux anneaux, à la base des arceaux et à l'avant de la tente.

L'intérieur et le double toit peuvent rester attachés pendant le montage et le repliage. Cependant, dans des conditions humides ou mouillées, le

dessous du double toit peut être recouvert de condensation. Si c'est le cas, il peut être conseillé de détacher l'intérieur et de l'emballer

séparément, pour l'empêcher de devenir humide

……………………………………………………………………………………………………………………………………………………………………………………………………………

ISTRUZIONI PER IL MONTAGGIO – VALETTA II (IT)

Primo montaggio del telo esterno

1. Montare i paletti e stenderli paralleli al suolo (3 paletti - 2 lunghi e 1 corto per la veranda) I palette sono codificati a seconda

del colore in modo da far combaciare i corrispondenti punti d'entrata dei manicotti del paletto

2. Aprire il telo esterno e posizionarlo nella direzione richiesta

3. Individuare i manicotti dei paletti sul telo esterno e inserirvi i paletti, uno alla volta. Collocare un'estremità di ogni paletto nel sistema

anello-perno corrispondente del telo esterno.

4. Arcuare ognuno dei paletti diagonali spingendo dall'estremità opposta e collocare le estremità del paletto nel sistema anello-perno

corrispondente.

5. Fissare i punti di ancoraggio a entrambi gli angoli di uno dei lati della tenda usando i picchetti forniti.

6. Tendere bene il telo esterno, allontanandolo dai punti di ancoraggio, fino a che la tenda prende forma. Fissare i due punti di ancoraggio

elastici opposti usando i picchetti. Controllare che la tenda sia ben allineata.

7. Fissare i paletti a terra attraverso gli anelli metallici e i restanti punti di ancoraggio del telo esterno.

8. Fissare TUTTI i tiranti.

Fissaggio interno

1. Aprire le tende interne all'interno del telo esterno e posizionare le entrate in modo da farle corrispondere con la zona giorno

2. Cominciando con gli angoli posteriori della tenda, fissare i ganci elasticizzati sul telone impermeabile

3. Appendere l'interno fissando le olivette della tenda interna mediante gli anelli all'interno del telo esterno. Iniziare con la parte posteriore

e poi procedere verso quella anteriore

4. Attaccare i ganci del telo impermeabile della veranda ai corrispondenti anelli alla base del telo esterno

5. Collegare il telo impermeabile della veranda attaccando i ganci agli anelli alla base dei paletti e sul davanti della tenda

Il telo interno e quello esterno possono restare attaccati quando si monta la tenda o la si imballa. Tuttavia, con elevata umidità o pioggia, il lato

inferiore del telo esterno può essere bagnato dalla condensa. In questo caso è consigliabile staccare l'interno e imballarlo separatamente, per

evitare che si bagni

Rating

Let us know what you think about the Vango Valetta II 300 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Vango Valetta II 300 Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Vango Valetta II 300 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

John Stevens 07-06-2021
As a first time camper I’m finding the instructions near impossible to follow? Even a quick diagram or short video would help a LOT HELP

reply | This was helpful (0)

More about this manual

We understand that it’s nice to have a paper manual for your Vango Valetta II 300 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Vango. They might be able to provide an original manual. Are you looking for the manual of your Vango Valetta II 300 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Vango
Model	Valetta II 300
Category	Tents
File type	PDF
File size	0.14 MB

All manuals for Vango Tents
More manuals of Tents

Frequently Asked Questions about Vango Valetta II 300 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more