Home > Camping & Outdoor > Tents > Vango Tents > Vango Scafell 200+ Tent

Manual Vango Scafell 200+ Tent

Name: Vango Scafell 200+ Tent
Brand: Vango
SKU: Scafell 200+
Rating: 100 (1 reviews)

Need a manual for your Vango Scafell 200+ Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 1 vote with an average product rating of 100/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

TENT PITCHING INSTRUCTIONS – SCAFELL PLUS (EN)

Flysheet First Pitching

1. Assemble the three poles and lay them parallel on the ground.

2. Open flysheet on ground and position tent in desired direction

3. Locate black pole sleeves on outside of flysheet and insert poles. The pole sleeve ends are colour matched to the poles.

4. Locate one end of each pole into corresponding eyelets on pole anchor straps

5. Push poles into an arch from the opposite side and locate pole ends into corresponding eyelets

6. Tighten the flysheet by adjusting the tension straps at the base of the poles.

7. Peg out adjustable anchor straps at both corners of the rear of the tent, using alloy pin pegs.

8. Pull the tent forwards, away from pegging points, until tent takes shape, Peg the two anchor straps at the front of the tent.

9. Peg down pole anchor straps and remaining flysheet pegging points

10. Peg out ALL guy lines.

11. Lay out the porch groundsheet in correct direction. Connect the plastic hooks at rear corners to the rings at pole base; then loop the

front elastics around the front pegging points.

The inner and flysheet can remain attached when pitching and packing. However, in humid or wet conditions the underside of the flysheet

may be coated with condensation. If this is the case it may be advisable to detach the inner and pack it separately to prevent it from

becoming wet

Inner Attachment

1. Open out inner tent inside flysheet and position doorway to correspond with the porch entrance of the flysheet.

2. Starting from the rear corners of the tent, attach the elasticated hooks on the groundsheet to corresponding rings on the flysheet

anchor straps. Suspend the inner by attaching the elastic loops of the inner tent with clips on inside of flysheet.

Tension Band System

1. Insert tension bands through corresponding access points in the inner tent (ceiling and sidewall). Connect the straps into the side-

release buckles.

2. Adjust the tension of the TBS straps until the slack is taken out

3. Tension band pockets are provided for storage when not in use.

………………………………………………………………………………………………………………………………………………………………………………………

AUFBAUANLEITUNG – SCAFELL PLUS (DE)

Mit Außenzeltaufbau zuerst

1. Stecken Sie die drei Stangen zusammen und legen Sie sie parallel zueinander auf den Boden.

2. Breiten Sie das Überdach auf dem Boden aus und positionieren Sie das Zelt in der gewünschten Richtung.

3. Fixieren Sie die schwarzen Stangenhüllen an der Außenseite des Überdachs und führen Sie die Stangen ein. Die Enden der

Stangenhüllen sind passend zu den Stangen farblich markiert.

4. Fixieren Sie ein Ende jeder Stange in den dazu passenden Ösen in den Verankerungsschnüren der Stangen.

5. Drücken Sie die Stangen gewölbeförmig von der gegenüberliegenden Seite aus hoch und fixieren Sie die Stangenenden in den dazu

passenden Ösen.

6. Spannen Sie das Vordach, indem Sie die Spannschnüre am Ende der Stangen festziehen.

7. Stecken Sie die flexiblen Verankerungsschnüre an beiden Ecken der hinteren Seite des Zelts aus, indem Sie die Metallarretierstifte

verwenden.

8. Ziehen Sie das Zelt nach vorne, von den Befestigungspunkten weg, bis das Zelt Form annimmt. Befestigen Sie die zwei

Verankerungsschnüre vorne am Zelt.

9. Befestigen Sie die Verankerungsschnüre der Stangen und die verbleibenden Befestigungspunkte des Überdachs.

10. Spannen Sie ALLE Spannseile.

11. Legen Sie die Bodenplane des Vorbaus in der richtigen Richtung aus. Verbinden Sie die Plastikhaken an den hinteren Ecken mit den

Ringen am Ende der Stange, legen Sie dann die vorderen Gummiringe um die vorderen Befestigungspunkte.

Innenzelt und Überdach können während Aufbau und Abdichtung befestigt bleiben. Jedoch kann die Unterseite des Vordachs bei feuchten

oder nassen Wetterbedingungen mit Kondenswasser bedeckt sein. Falls dies der Fall sein sollte, ist es ratsam, das Innenzelt zu lösen und

es separat einzupacken, um es vor Nässe zu schützen.

Innenbefestigung

1. Breiten Sie das Innenzelt im Inneren des Überdachs aus und positionieren Sie die Türöffnung so, dass sie mit dem Eingang des Vorbaus

am Überdach übereinstimmt.

2. Von den hinteren Ecken des Zeltes ausgehend, befestigen Sie die elastischen Haken an der Bodenplane mit den passenden Ringen an

den Verankerungsschnüren des Überdachs. Hängen Sie das Innenzelt ein, indem Sie die Gummibänder des Innenzelts mit Clips an der

Innenseite des Überdachs befestigen.

Spanngurtvorrichtung

1. Ziehen Sie die Spannschnüre durch die zugehörigen Zugangspunkte im Innenzelt (Decke und Seitenwand). Verbinden Sie die Schnüre

mit den seitlichen Freigabespangen.

2. Passen Sie die Spannung der TBS-Schnüre an, bis das Zelt gespannt ist.

3. Taschen für die Spannschnüre werden zum Verstauen der nicht gebrauchten Bänder mitgeliefert.

Rating

Let us know what you think about the Vango Scafell 200+ Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Vango Scafell 200+ Tent?
Yes No

100%

1 vote

Join the conversation about this product

Here you can share what you think about the Vango Scafell 200+ Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Vango Scafell 200+ Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Vango. They might be able to provide an original manual. Are you looking for the manual of your Vango Scafell 200+ Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Vango
Model	Scafell 200+
Category	Tents
File type	PDF
File size	0.14 MB

All manuals for Vango Tents
More manuals of Tents

Frequently Asked Questions about Vango Scafell 200+ Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more