Home > Camping & Outdoor > Tents > Vango Tents > Vango Alpha 400 CLR Tent

Manual Vango Alpha 400 CLR Tent

Need a manual for your Vango Alpha 400 CLR Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

TENT PITCHING INSTRUCTIONS – ALPHA (UK)

Inner First Pitching

Assemble poles and lay them parallel on the ground (3 poles - 2 longer poles and

1 shorter porch pole).

Open out inner and position in required direction.

Insert the two longer poles diagonally through pole sleeves on inner tent.

Locate one end of each diagonal pole onto pin system at groundsheet corners.

Push each diagonal pole into an arch from opposite end and locate pole ends onto corresponding pin system.

Attach all clips that connect inner tent to poles.

Peg each of the 4 corners of the inner tent through the ring of the ring and pin system.

Flysheet

Open out flysheet and position so that the inner doorway and the flysheet doorway correspond.

Pull flysheet over the inner tent and position seams to correspond with poles on inner.

A number of velcro strips are located on the underside of the flysheet. These must be secured around the poles of the inner tent.

Peg down each side of flysheet through the shock-cord pegging points, adjacent to the metal rings of the inner tent. Use the pin-pegs

supplied.

Insert remaining porch pole into the pole sleeve on the outside of flysheet.

Locate one end of the porch pole onto second pin at front pole of tent.

Push the opposite end of the pole into an arch and locate pole end onto the corresponding pin system.

Pull porch taut, away from main body of tent and peg down the corners of the porch through the shock-cord pegging points using pin-

pegs.

Peg out all remaining shock-cord pegging points on the base of the flysheet using pin-pegs.

Peg out ALL guy lines using pin-pegs ensuring that guy line fabric attachment points are evenly tensioned.

Open flysheet door and peg front corners of porch groundsheet

……………………………………………………………………………………………………………………………………………………………………………………………………………

AUFBAUANLEITUNG – ALPHA (DE)

Innenzelt-zuerst-Aufbau

Stecken Sie die Stangen zusammen und legen Sie sie parallel zueinander auf den Boden (3 Stangen - 2 längere und 1 kürzere

Vorbaustange).

Innenzelt auslegen und korrekt ausrichten.

Stecken Sie die beiden längeren Stangen diagonal durch die Gestängekanäle des Innenzelts ein.

Befestigen Sie ein Ende jeder diagonalen Stange mit dem Stift-System an der Ecke der Bodenplane (Abbildung 1).

Drücken Sie jede diagonale Stange gewölbeförmig von der gegenüberliegenden Seite aus hoch und fixieren Sie die Stangenenden mit

dem passenden Stift-System.

Befestigen alle Halterungsklemmen, mit denen das Innenzelt am Gestänge befestigt wird.

Stecken Sie jede der 4 Ecken des Innenzelts durch die Ringe des Ring-und-Stift-Systems (Abbildung 2).

Außenzelt

Außenzelt ausfalten und so ausrichten, dass Inneneingang und Außenzelteingang übereinstimmen.

Ziehen Sie das Außenzelt über das Innenzelt und richten Sie die Nähte so aus, dass sie an den Stangen des Innenzelts verlaufen.

An den Unterseite des Außenzelts befinden sich eine Reihe von Klettverschlussstreifen. Diese müssen um die Stangen des Innenzelts

befestigt werden.

Befestigen Sie jede Seite des Außenzelts durch die mit Gummizug versehenen Befestigungspunkte, die sich neben den Metallringen

des Innenzelts befinden. Verwenden Sie die mitgelieferten Stiftheringe.

Stecken Sie die übrige Vorbaustange in den Gestängekanal auf der Außenseite des Außenzelts ein.

Stecken Sie ein Ende der Vorbaustange auf den zweiten Stift an der Vorderstange des Zeltes auf.

Schieben Sie das gegenüberliegende Ende der Stange in eine gewölbte Form und stecken Sie das Stangenende auf das zugehörige

Stiftsystem auf.

Ziehen Sie den Vorbau straff und vom Hauptzelt weg und fixieren Sie die Ecken des Vorbaus durch die mit Gummizug ausgestatteten

Befestigungspunkte mit Stiftheringen.

Befestigen Sie alle übrigen mit Gummizug versehenen Befestigungspunkte mithilfe der Stiftheringe an der Basis des Außenzelts.

Stecken Sie alle Spannschnüre mit den mitgelieferten Arretierstiften aus und stellen Sie sicher, dass die Befestigungspunkte der

Spannschnüre gleichmäßig unter Spannung sind.

Richten Sie die Bodenplane des Vorbaus aus und klippen/stecken Sie sie an Ihren Platz.

Rating

Let us know what you think about the Vango Alpha 400 CLR Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Vango Alpha 400 CLR Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Vango Alpha 400 CLR Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Vango Alpha 400 CLR Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Vango. They might be able to provide an original manual. Are you looking for the manual of your Vango Alpha 400 CLR Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Vango
Model	Alpha 400 CLR
Category	Tents
File type	PDF
File size	0.3 MB

All manuals for Vango Tents
More manuals of Tents

Frequently Asked Questions about Vango Alpha 400 CLR Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more