Home > Children & Babies > Baby Monitors > Techwall Electronics Baby Monitors > Techwall Electronics 1K-1 Baby Monitor

Manual Techwall Electronics 1K-1 Baby Monitor

Need a manual for your Techwall Electronics 1K-1 Baby Monitor? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

i studio2008/Nov/24Techwall Electronics

1K-1 Baby Monitor Manual_ Page 4

i studio2008/Nov/24Techwall Electronics

1K-1 Baby Monitor Manual_ Page 5

Precautions

- Use only 9V 100mA type AC adapters. Use of other AC adapter may cause damage

to the unit.

- When not using the unit for a long period of time, remove all battery from the

transmitter and receiver to avoid battery leakage.

- Disconnect the AC adapter from the wall outlet when the unit is not to be operated.

- The unit is best performed within a temperature range of 0 °C to 40°C (22 F to

104 F).

- Do not leave the unit expose to direct sunlight for a long time or near any heat

source, moisture and excessive dust environment.

- When the unit cabinet become dirty, use detergent and clean with a soft cloth.

Never use abrasive cleaner or chemical solvent.

- Do not open the cabinet, no serviceable parts inside.

Standard Accessor

a. Transmitter Unit ……………………………………………………………........ 1

b. Receiver Unit ………………………………………………………………….…. 1

c. User Manual ……………………………………………………………….…….. 1

The users manual or instruction manual for an intentional or unintentional radiator

shall caution the user that changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to operate the

equipment. In cases where the manual is provided only in a form other than paper,

such as on a computer disk or over the Internet, the information required by this

section may be included in the manual in that alternative form, provided the user

can reasonably be expected to have the capability to access information in that form.

FCC Information

This device complies with Part 15 of the FCC Results.

Operation is subject to the following two conditions :

(1) This device may not cause harmful interface, and

(2) This device must accept any interference received, including interference that

may cause undesired operation.

WARNING

Change or modification not expressly approved by the manufacturer could void the

user’s authority to operate the equipment.

Transmitter has no

transmission

Transmitter always on

Static noise sometimes

heard

Many static noises and

interference

Communication distance is

too short

Receiver cannot receive

signal from transmitter

- The input sound level is

too low

- Battery has run down or

AC adapter improperly

connected

- The input sound level is

too high

- Interference from other

devices operating on

same channel

- Transmitter is located

near other electrical

appliances

- Transmitter or receiver

battery has run down

- Too many metal shielding

structures between

transmitter and receiver

- Receiver and transmitter

are set with different

private tones

- Place transmitter

closer to baby

- Replace with new battery

or check connection

- Place the

transmitter further away

from the baby

- Switch to another channel

- Remove the electrical

appliance or re-locate the

transmitter far away from

the source of interference.

- Replace with new battery

or use AC adapters as power

supply

- Re-locate the transmitter

or receiver

- Consult your dealer and

change another set with

properly matched private

tone.

TROUBLE SHOOTING GUIDE

Problem Possible Causes Solution

Rating

Let us know what you think about the Techwall Electronics 1K-1 Baby Monitor by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Techwall Electronics 1K-1 Baby Monitor?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Techwall Electronics 1K-1 Baby Monitor. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Techwall Electronics 1K-1 Baby Monitor. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Techwall Electronics. They might be able to provide an original manual. Are you looking for the manual of your Techwall Electronics 1K-1 Baby Monitor in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Techwall Electronics
Model	1K-1
Category	Baby Monitors
File type	PDF
File size	0.33 MB

All manuals for Techwall Electronics Baby Monitors
More manuals of Baby Monitors

Frequently Asked Questions about Techwall Electronics 1K-1 Baby Monitor

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Why is the range of my baby monitor less than the brochure/manual describes? Verified

Brands tend to state a range that is based on use without obstacles like walls or a distance that covers multiple floors. If the range is insufficient, try to place the baby monitor so that it has minimum obstacles.

This was helpful (661) Read more