Manual Techwall Electronics 1K-1 Baby Monitor

Manual

OPERATION

1. Set the transmitter Power ON-OFF switch 1 to ON position.

2. Set the channel selector 2 to either CH1 or CH2 position .

3. The Power On indicator 3 will light up green. If it becomes red or dim, the

batteries have run down and need to be replaced.

4. Place the transmitter nearby the cot with the microphone 5 facing towards the

baby, preferably 1m away.

5. Once the built-in condenser microphone 5 picks up any sound from the baby,

the transmitter will automatically switches into transmit mode and the transmit

indicator 4 lights up.

6. When the baby stops making sound, the transmitter will return to standby mode

and the transmit indicator 4 goes off.

7. Using the Channel Selector 9 on receiver, set to the same channel as the transmitter.

8. Turn the Volume Control 8 to switch on the receiver at a reasonable distance

away from the transmitter. (Too close a distance will create feedback which cause

a screeching sound at the speaker). The Power On indicator 10 will light up

green, if it becomes red or dim, the batteries have run down and need to be

replaced.

9. Whenever a signal is received, the receiver indicator 11 will light up. The louder

the voice, the brighter the indicator. This indicator is useful to monitor the baby

when volume of speaker is turned down.

10. In case you hear interference or static noises, change to another channel on both

the transmitter and receiver.

11. This baby monitor is incorporated with private tone feature, so static noises will

not be heard in the receiver under standby mode. However, it is necessary

that the transmitter and receiver have the same

private tone (as indicated by colour code in the

battery compartment) to communicate with

each other.

12. Both the transmitter and receiver can be carried

around using hand strap. To install hand strap

(purchased separately), follow diagram as shown.

i studio2008/Nov/17Techwall Electronics

1K-1 Baby Monitor Manual_ Page 2

i studio2008/Nov/17Techwall Electronics

1K-1 Baby Monitor Manual_ Page 3

2

3

2. Operation from AC manis

The unit can be operated on AC mains using 9V 100mA type AC adapter (purchased

separately). Connect the output plug (Ø 2.35mm) of the adapter to the DC jack on

the unit, make sure the polarity is correct.

Controls Layout

Power ON/OFF switch

Channel selector

Power On and Battery Low indicator

Transmit indicator

Microphone

Antenna

DC jack

1

Volume control with ON/OFF switch

Channel selector

Power On and Battery Low indicator

Receive indicator

Speaker

Antenna

DC jack

TRANSMITTER RECEIVER

2

3

4

5

6

7

8

9

10

11

12

13

14

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Techwall Electronics 1K-1 Baby Monitor. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Techwall Electronics. They might be able to provide an original manual. Are you looking for the manual of your Techwall Electronics 1K-1 Baby Monitor in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Techwall Electronics Baby Monitors
More manuals of Baby Monitors

Frequently Asked Questions about Techwall Electronics 1K-1 Baby Monitor

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Motorola VM85-3 CONNECT Baby Monitor

Manual

Alecto DBX-112 Baby Monitor

Manual

Vtech VM310 Baby Monitor

Manual

Q-See QSW8209 Baby Monitor

Manual

Motorola COMFORT85 CONNECT Baby Monitor

Manual

Babymoov A014303 Expert Care Baby Monitor

Manual

Motorola MBP843CONNECT-3 Baby Monitor

Manual

Vtech DM111 Baby Monitor

Related categories