Home > Household appliances > Irons > Sunbeam Irons > Sunbeam SR5770 Ultura 70 Platinum Iron

Manual Sunbeam SR5770 Ultura 70 Platinum Iron

Need a manual for your Sunbeam SR5770 Ultura 70 Platinum Iron? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Before first use

Remove any adhesive stickers, plastic covers

or cardboard sleeves from the soleplate.

Ensure that all adhesive is removed by

rubbing the soleplate with a cloth

dampened with methylated spirits.

Fill the water tank and empty the water. This

will rinse out any foreign particles remaining

in the water tank from the manufacturing

process.

NOTE: When turned on for the first time,

your new iro

n may give off vapours for up

to 10 minutes. This is due to the initial

heating of the materials used. It is safe, not

detrimental to the performance of the iron,

and will not reoccur.

Filling the iron with water

Before filling the iron with water ensure the

power is turned off and the plug is removed

from the power outlet. The iron can be filled

with water while it is hot.

1. Turn the STEAM/DRY dial to DRY

2. Place the iron on its heel and open the

water inlet cover.

3. Slowly pour water into the water inlet until

the maximum water level is reached. Do not

exceed the maximum water level indicator.

Push the water inlet cover firmly to close.

NOTE: The special soleplate design allows you

to use tap water with your Ultura iron without

affecting the steam performance. However in

very hard water areas, Sunbeam r

ecommends

the use of distilled water, or water which has

been demineralised.

For best performance, we recommend the

use of Sunbeam Water Demineraliser, available

from Sunbeam Service Centres and selected

retailers. This will produce up to 30 litres of

demineralised water.

Do not fill the iron with fabric conditioner,

starches or any other solution as these will

damage the steam mechanism. Do not use

contami

nated water.

Using your iron

1.Insert the 3 pin plug into a 230/240 volt

power outlet and turn the power on. The

power ON light (positioned on top of the

handle) will illuminate to indicate that the

iron is switched on and heating.

2.Turn the temperature dial to the desired

setting by aligning the setting on the dial

with the temperature indicator light. The

boost light will illuminate to indicate

that the i

ron is heating to the selected

temperature. When the boost light goes

out the iron has reached the selected

temperature and is ready to use.

NOTE: When the temperature dial is changed

from a high setting to a lower temperature

setting during ironing, the boost light will go

out immediately. This indicates that the iron

is cooling to the selected temperature. To

ensure that the iron has reached the selecte

temperature and is not too hot, wait until the

boost light comes on again and then goes out

before ironing.

Dry ironing

Follow steps 1 and 2 above.

3.Select DRY on the STEAM/DRY dial.

This will cut off the steam flow if there

is water in the tank.

Steam ironing

Follow steps 1 and 2 above.

NOTE: When steam ironing, ensure that the

temperature dial is set to any temperature

within the steam band, and that th

e tank

is at least 1/4 full of water.

4.Turn the STEAM/DRY dial to the desired

steam setting.

For best results, select the steam setting

that corresponds to the selected temperature,

as indicated on the temperature dial.

Using your Sunbeam Ultura Iron

Download manual in English (PDF, 1.04 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Sunbeam SR5770 Ultura 70 Platinum Iron by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Sunbeam SR5770 Ultura 70 Platinum Iron?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Sunbeam SR5770 Ultura 70 Platinum Iron. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Sunbeam SR5770 Ultura 70 Platinum Iron. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sunbeam. They might be able to provide an original manual. Are you looking for the manual of your Sunbeam SR5770 Ultura 70 Platinum Iron in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Sunbeam
Model	SR5770 Ultura 70 Platinum
Category	Irons
File type	PDF
File size	1.04 MB

All manuals for Sunbeam Irons
More manuals of Irons

Frequently Asked Questions about Sunbeam SR5770 Ultura 70 Platinum Iron

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I clean the bottom of my iron with a scourer? Verified

No, this might damage the bottom. Use a moist cloth or a soft sponge to clean it.

This was helpful (424) Read more

What are the differences between a steam iron and a regular iron? Verified

The biggest advantage of a steam iron is that it removes wrinkles easier due to the use of steam. A regular iron on the contrary is much lighter and often cheaper.

This was helpful (346) Read more

The sole of my iron is discoloured, can I still iron with it? Verified

That is possible, but there is a chance it will rub off on light coloured clothing.

This was helpful (287) Read more

Can I iron over buttons? Verified

No, this will damage the sole of the iron and that will prevent the iron from working correctly. Never iron over buttons, zippers or other hard objects.

This was helpful (238) Read more