Home > Household appliances > Wine Cabinets > Summit Wine Cabinets > Summit SCR1401XCSS Wine Cabinet

Manual Summit SCR1401XCSS Wine Cabinet

Need a manual for your Summit SCR1401XCSS Wine Cabinet? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

INSTALLATION INSTRUCTIONS

BEFORE USING YOUR APPLIANCE

Remove the exterior and interior packing.

CAUTION: After unpacking you MUST allow your appliance to stand upright for at least 2 hours to allow

the lubricant and refrigerant to drain back into the compressor and stabilize. Failure to do so may

adversely affect performance and the lifetime of the unit.

Clean the interior surface with lukewarm water using a soft cloth.

Install the handle on the door. (See page 9.)

INSTALLATION OF YOUR APPLIANCE

The appliances are designed for either built-in or free-standing installation.

WARNING: Do not store or install appliances beginning SCR1401, SCR1156, or SCR610 in the

outdoors. Model SCR611GLOS is rated for outdoor use.

CAUTION: This appliance is designed for storing and cooling beverages, including wines and

champagne. Do not store perishable food, medicine or other medical products.

Place your wine cellar on a floor that is strong enough to support it when it is fully loaded. To level the

unit, adjust the front leveling legs.

For freestanding installation, 5 inches (127 mm) of space between the back and sides of the unit are

suggested, which allows the proper air circulation to cool the compressor and condenser for energy

saving. Even for built-in installation, it is a must to keep 2 to 3 mm of space (about 1/10") on each side

and at the top, and 2 inches (51 mm) at the back, to ensure proper service access and ventilation. And

the air vent at the front of the appliance must never be covered or blocked in any way.

NOTE: It is recommended that you do not install the appliance near an oven, radiator or other heating

source. Direct sunlight may affect the acrylic coating and heat sources may increase electrical

consumption. Don’t install in a location where the temperature will fall below 60°F (16°C). For best

performance, do not install the appliance behind a cabinet door or block the base grille.

Avoid locating the unit in moist areas.

Plug the wine cellar into an exclusive, properly grounded wall outlet. Do not under any circumstances

cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or

grounding should be directed toward a certified electrician or an authorized service center.

ELECTRICAL CONNECTION

This appliance should be properly grounded for your safety. The power cord of this appliance is equipped

with a three-prong plug which mates with standard three-prong wall outlets to minimize the possibility of

electrical shock.

Do not under any circumstances cut or remove the third (ground) prong from the power cord supplied. For

personal safety, this appliance must be properly grounded.

This appliance requires a standard 115/120 Volt AC ~ 60Hz three-prong grounded electrical outlet. Have

the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it

replaced with a properly grounded 3-prong wall outlet.

WARNING

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is

damaged, have it replaced by a qualified electrician or an authorized service center.

Rating

Let us know what you think about the Summit SCR1401XCSS Wine Cabinet by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Summit SCR1401XCSS Wine Cabinet?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Summit SCR1401XCSS Wine Cabinet. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Summit SCR1401XCSS Wine Cabinet. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Summit. They might be able to provide an original manual. Are you looking for the manual of your Summit SCR1401XCSS Wine Cabinet in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Summit
Model	SCR1401XCSS
Category	Wine Cabinets
File type	PDF
File size	1.03 MB

All manuals for Summit Wine Cabinets
More manuals of Wine Cabinets

Frequently Asked Questions about Summit SCR1401XCSS Wine Cabinet

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store red and white wine in the same wine cabinet? Verified

Yes. Red and white wine are served at different temperatures, but the ideal storage temperature is the same, being 12°C.

This was helpful (288) Read more

If I want my fridge-freezer to be colder, should I choose for a higher or lower setting? Verified

With most fridge-freezers a higher setting means the machine will cool harder. With a lower setting, the machine will cool less hard and the temperature in the fridge-freezer will be higher.

This was helpful (206) Read more

I bought a new wine cabinet, can I turn it on immediately? Verified

No, the wine cabinet needs to stand in an upright position for at least 4 hours before it can be turned on. This is because the coolant liquid needs to settle.

This was helpful (167) Read more

How long does it take for my refrigerator to reach the set temperature after I turn it on? Verified

This depends on the size, age and model of the refrigerator. It may take several hours to 24 hours for the refrigerator to reach the set temperature. The process can be accelerated by placing non-perishable goods in the refrigerator. The temperature in the refrigerator cannot be measured properly by feeling the air inside. The best way to tell if the refrigerator has reached the set temperature is to place a glass of water in the refrigerator with a thermometer in it.

This was helpful (149) Read more