Home > Kitchenware > Ice Cube Makers > Summit Ice Cube Makers > Summit BIM18SS/ADA Ice Cube Maker

Manual Summit BIM18SS/ADA Ice Cube Maker

Need a manual for your Summit BIM18SS/ADA Ice Cube Maker? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

INSTALLATION INSTRUCTIONS

Before Using Your Icemaker

1. Remove the exterior and interior packing.

CAUTION: After unpacking you MUST allow this appliance to stand upright for at least 2 hours

to allow the lubricant and refrigerant to drain back into the compressor and stabilize.

Failure to do so may adversely affect performance and the lifetime of this appliance.

2. Clean the interior surface with lukewarm water using a soft cloth.

3. Install the handle on the left side of the door.

Installation of Your Icemaker

● This appliance is designed for free standing or built-in (fully recessed) installation.

● Place your icemaker on a floor that is strong enough to support it when it is fully loaded. To level your

icemaker, adjust the front leveling legs.

● For free-standing installation, 5” (127mm) of space between the back and sides of the appliance, and

4” (102mm) at the top, are suggested, which allows the proper air circulation to cool the compressor

and condenser. Even for built-in installation, keep ¼” (6.35mm) space on each side and at the top and

2” (51mm) at the rear. If the appliance has an air vent at the front, take care that it is never covered or

blocked in any way.

● Locate the icemaker away from direct sunlight and sources of heat (stove, heater, radiator, etc.).

Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.

Extremely cold ambient temperatures may also cause the appliance not to perform properly.

● Avoid locating the appliance in moist areas.

● Plug the icemaker into an exclusive, properly installed, grounded wall outlet. Do not under any

circumstances cut or remove the third (ground) prong from the power cord. Any questions

concerning power and/or grounding should be directed toward a certified or authorized product

service center.

Connecting Your Water Line

The in-cabinet icemaker produces and stores up to eight pounds of crescent ice cubes in a removable

bin. Producing ice requires purchasing a ¼” OD copper tubing kit, which can be found at most hardware

or plumbing supply stores. The kit contains all the hardware necessary to connect your in-cabinet

icemaker to the water supply.

Forming the copper tubing

Loop the tubing coming from the water valve, as shown. Position the coiled copper tubing near the

center of the appliance so that it forms an “accordion fold” (see diagram below) for when the icemaker is

moved to and from the wall.

Rating

Let us know what you think about the Summit BIM18SS/ADA Ice Cube Maker by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Summit BIM18SS/ADA Ice Cube Maker?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Summit BIM18SS/ADA Ice Cube Maker. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Summit BIM18SS/ADA Ice Cube Maker. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Summit. They might be able to provide an original manual. Are you looking for the manual of your Summit BIM18SS/ADA Ice Cube Maker in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.