Home > Kitchenware > Ice Cube Makers > Summit Ice Cube Makers > Summit BIM18SS/ADA Ice Cube Maker

Manual Summit BIM18SS/ADA Ice Cube Maker

Need a manual for your Summit BIM18SS/ADA Ice Cube Maker? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

appliance is stated on the data plate on the appliance. It is hazardous for anyone other than an Authorized

Service Person to carry out servicing or repairs to this appliance.

• Take serious care when handling, moving, and using the appliance to avoid either damaging the refrigerant

tubing or increasing the risk of a leak.

• Replacing component parts and servicing shall be done by factory authorized service personnel so as to

minimize the risk of possible ignition due to incorrect parts or improper service.

•

All installations must be in accordance with local plumbing code requirements.

•

Make certain that the pipes are not pinched, kinked, or damaged during installation.

•

Check for leaks after connection.

•

Never allow children to operate, play with, or crawl inside the appliance.

•

Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or

discolor the interior.

•

Use this appliance only for its intended purpose as described in this Owner’s Manual.

•

Keep fingers out of the “pinch point” areas. Clearances between the door and cabinet are necessarily small.

Be careful closing the door when children are in the area.

•

Technical specifications are subject to change without notice.

– SAVE THESE INSTRUCTIONS –

TECHNICAL INFORMATION

Models

BIM18SS/ADA*,

BIM18IF**/ADA

Type

Icemaker

Door

Stainless Steel/Panel Ready

Cabinet

Black

Door Swing

RHD

Reversible

Yes

Level Legs

Interior Light

Yes

Ice Storage Capacity

8.0 lbs.

Ice Shape

Crescent

Rated Voltage

115V AC / 60Hz

Rated Current

1.1A

Power Input

130W

Power of Heater

160W

High Side PSI

270.0

Low Side PSI

103.0

Refrigerant

R600a

Refrigerant Amount

1.06 oz

Defrost Type

Frost-free

Net Weight

82.0 lbs.

Interior Dimensions

12.75” W x 16.75” D x 23.5” H

Compressor Step

Dimensions

12.75” W x 4.5” D x 4.5” H

Temperature Range

-22 to 14°F

Testing Agency

ETL/ETL-C

*Models with the suffix “ADA” are sized for installation under lower, ADA compliant counters.

**Models with a suffix of “IF” are designed to accept custom panels on the door. To reverse the swing of

these doors, contact the Parts and Service team for a replacement door hinge.

Rating

Let us know what you think about the Summit BIM18SS/ADA Ice Cube Maker by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Summit BIM18SS/ADA Ice Cube Maker?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Summit BIM18SS/ADA Ice Cube Maker. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Summit BIM18SS/ADA Ice Cube Maker. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Summit. They might be able to provide an original manual. Are you looking for the manual of your Summit BIM18SS/ADA Ice Cube Maker in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.