Manual Sony MDR-RF895RK Headphone

Manual

Wireless Stereo

Headphone System

©2017 Sony Corporation Printed in Vietnam

4-691-894-14(1)

MDR-RF895RK

Operating Instructions

Mode d’emploi

How to use

Tips for charging

Charge supplied battery first

The supplied rechargeable nickel-metal hydride battery is

not charged from the first time you use it. Be sure to

charge them before use.

About auto charge function

Placing the headphones on the transmitter automatically

turns them off, then charging starts. This eliminates the

need for turning on/off every time you wear and take off

the headphones.

If CHARGE/RED indicator does not

light up red

– Check if the right and left headphones are rested on the

transmitter correctly. Take off the headphones and place

them on the transmitter again so that the headphones’

contact points meet the transmitter’s contact pins.

– Charging may not be completed if the transmitter’s

contact pin and headphones’ contact point are dusty.

Wipe them with a cotton bud, etc.

Charging and usage time

Approx. charging time Maximum usage time

1)

7 hours

2)

20 hours

3)

1) at 1 kHz, 0.1 mW + 0.1 mW output

2) hours required to fully charge an empty battery

3) Time may vary, depending on the temperature or

conditions of use.

To recharge supplied battery after

use

Place the headphones on the transmitter after use. The

CHARGE/RED indicator lights up red, then charging starts.

When charging is complete, there is no need to remove

the headphones from the transmitter.

Remaining battery

To check the remaining battery charge of the headphones,

turn on the POWER switch and check the POWER indicator.

The battery is still serviceable when the indicator lights up

green.

Charge the headphones if the POWER indicator turns off,

dims, flashes, or the sound becomes distorted or noisy.

Notes

– Insert the AC adaptor plug firmly.

– Be sure to use the supplied AC adaptor. Using AC

adaptors with different plug polarity or other

characteristics can cause product failure.

Unified

polarity plug

– The battery capacity may decrease if the headphones

are turned on and placed on the transmitter with the AC

adaptor disconnected.

– The transmitter automatically turns off while charging

the headphones.

– This system is designed to charge only the supplied

rechargeable battery BP-HP800-11 for safety. Note that

other types of rechargeable battery cannot be charged

with this system.

– If dry batteries are installed, they cannot be charged.

– Do not attempt to use the supplied rechargeable battery

BP-HP800-11 for other components. It is for use with this

system only.

– Charge in an environmental temperature of between

5 °C and 35 °C.

– When the battery life reduces to half, this may be the

end of battery lifetime. The supplied rechargeable

battery BP-HP800-11 is not commercially available. You

can order the battery from the store where you

purchased this system, or at your nearest Sony dealer.

– Do not touch the contact pins of the transmitter. If the

contact pins become dirty, charging may not be

possible.

– Charging may not be completed if the transmitter’s

contact pins and headphones’ contact points are dusty.

Wipe them with a cotton bud, etc.

Using the headphones

with separately-sold dry

batteries

Commercially available (LR03 (size AAA)) dry batteries can

also be used to power the headphones. Install two

batteries in the same manner as described in step 1 of

“How to use.”

If you attempt to charge the headphones with dry

batteries installed, the CHARGE/RED indicator lights up

red for 15 seconds, then turns off. The battery charge

function is not activated.

Battery life

Battery Approx. usage time

1)

Sony alkaline battery LR03

(size AAA)

24 hours

2)

1) at 1 kHz, 0.1 mW + 0.1 mW output

2) Time may vary, depending on the temperature or

conditions of use.

Note

Do not carry a dry battery together with coins or other

metallic objects. It can generate heat if the positive and

negative terminals of the battery are accidentally come

into contact with metallic objects.

Tips for connection

– When you connect the stereo mini cable (stereo mini

jack) directly to an earphone jack (monaural mini jack),

the audio signal may not be output through the right

channel.

Tips for volume setting

– If you connect the transmitter to the headphone jack of

the A/V component, set the volume of the A/V

component as high as possible but not so high that the

audio signal becomes distorted.

– When watching videos, be careful not to raise the

volume too high in quiet scenes. You may hurt your ears

when a loud scene is played.

Tips for sound effect

Slide the switch to select the desired sound effect, OFF or

VOICE.

Position of

switch

Sound effect and suitable sound

source

OFF

Normal playback of the

headphones.

VOICE

Produces a clearer announcer’s

voice.

Notes

– The volume of the headphones may vary, depending on

the input signal and the setting of the EFFECT switch.

– The sound effect may not be obtained depending on

the input sound sources.

Tips for better reception

Receiving performance

This system utilizes very high frequency signals in the 800

MHz band so the receiving performance may deteriorate

due to the surroundings. The following examples illustrate

conditions that may reduce the reception range or cause

interference.

– Inside a building with walls containing steel beams

– An area with many steel file cabinets, etc.

– An area with many electrical appliances capable of

generating electromagnetic fields

– The transmitter is placed on a metal instrument.

– An area facing a roadway

– Noise or interfering signals exist in the surroundings due

to radio transceivers in trucks, etc.

– Noise or interfering signals exist in the surroundings

owing to wireless communication systems installed

along roadways.

Effective area of the transmitter

The optimum distance is up to approximately 100 m

without the system picking up some interference.

However, the distance may vary depending on the

surroundings and environment.

– If the system picks up some noise within the above

mentioned distance, reduce the distance between the

transmitter and the headphones, or select another

channel.

– When you use the headphones inside the effective area

of the transmitter, the transmitter can be placed in any

direction from the listener.

– Even within the signal reception area, there are some

spots (dead spots) where the RF signal cannot be

received. This characteristic is inherent to RF signals, and

does not indicate malfunction. By slightly moving the

transmitter, location of the dead spot can be changed.

Replacing the earpads

The earpads are replaceable. If the earpads become dirty

or worn out, replace them as illustrated below. The

earpads are not commercially available. You can order

replacements from the store where you purchased this

system, or at your nearest Sony dealer.

1 Remove the old earpad by pulling it out of the groove

on the housing.

2 Fit the new earpad in the groove of the housing.

Make sure the earpad is set to the vertical position.

Precautions

– When this system is not to be used for a long period of

time, disconnect the AC adaptor from the AC outlet

holding the plug, and remove the battery from the

headphones to avoid damage caused by battery

leakage and subsequent corrosion.

– Do not leave this system in a location subject to direct

sunlight, heat or moisture.

– You may hear some noise when you disconnect the AC

adaptor from the transmitter before taking off the

headphones.

– Avoid exposure to temperature extremes, direct sunlight,

moisture, sand, dust or mechanical shock.

– Please note that water does not splash, this product is

not waterproof specification.

Notes on headphones

To reduce the risk of hearing damage

Avoid using headphones at high volume. Hearing experts

advise against continuous, loud and extended play. If you

experience a ringing in your ears, lower the volume or

discontinue use.

Caring for others

Keep the volume at a moderate level. This will allow you

to hear outside sounds and to be considerate to the

people around you.

If you have any questions or problems concerning the

system that are not covered in this manual, please consult

your nearest Sony dealer.

Be sure to bring the headphones and the transmitter to

the Sony dealer when requiring repair work.

Troubleshooting

If you run into any problems using this system, use the

following checklist. Should any problem persist, consult

your nearest Sony dealer.

No sound/Low sound

– Check the connection of the A/V component or the AC

adaptor.

– Check that the A/V component is turned on.

– If you connect the transmitter to an A/V component

using the headphone jack, raise the volume level on the

connected A/V component within the range where the

sound is not distorted.

– Change the radio frequency with the CHANNEL selector

on the transmitter, then change the radio frequency to

that of the transmitter with the AUTO TUNING button on

the headphones.

– Use the headphones near the transmitter, or change the

position of the transmitter.

– Charge the supplied rechargeable battery, or replace dry

batteries with new ones. If the POWER indicator is still

off after charging, take the headphones to a Sony dealer.

– Raise the headphone volume.

The sound cuts off

– The transmitter turns off if no signal or low signal is

input for 4 minutes. If you connect the transmitter to an

A/V component using the headphone jack, raise the

volume level on the connected A/V component within

the range where the sound is not distorted.

Distorted or intermittent sound

(sometimes with noise)

– Use the headphones near the transmitter, or change the

position of the transmitter.

– Do not place the transmitter on a metallic table.

– If you connect the transmitter to an A/V component

using the headphone jack, lower the volume level on the

connected A/V component within the range where the

sound is not distorted.

– Change the radio frequency with the CHANNEL selector

on the transmitter, then change the radio frequency to

that of the transmitter with the AUTO TUNING button on

the headphones.

– Charge the supplied rechargeable battery, or replace dry

batteries with new ones. If the POWER indicator is still

off after charging, take the headphones to a Sony dealer.

Loud background noise

– If you connect the transmitter to an A/V component

using the headphone jack, raise the volume level on the

connected A/V component within the range where the

sound is not distorted.

– Charge the supplied rechargeable battery, or replace dry

batteries with new ones. If the POWER indicator is still

off after charging, take the headphones to a Sony dealer.

– Do not place the transmitter on a metallic table.

– Use the headphones near the transmitter.

The POWER/GREEN indicator flashes

green

– No signal or low signal is input. Start playback of the A/V

component, or raise the volume of the connected A/V

component within the range where the sound is not

distorted, otherwise the transmitter will turn off. If no

signal or low signal is input for about 4 minutes, the

transmitter turns off automatically.

Battery cannot be charged/

CHARGE/RED indicator flashes red,

or does not light up red

– Check that the right/left of the headphones and

transmitter correspond, and put the headphones on the

transmitter correctly.

– Install the supplied rechargeable nickel-metal hydride

battery. Dry batteries and rechargeable batteries other

than the supplied cannot be charged.

– If the CHARGE/RED indicator does not light up red even

though you put the headphones on the transmitter and

wait for a while, it may be the end of battery lifetime.

You can order the supplied rechargeable battery

BP-HP800-11 from the store where you purchased this

system, or at your nearest Sony dealer.

– Charging may not be completed if the transmitter’s

contact pin and headphones’ contact point are dusty.

Wipe them with a cotton bud, etc.

Short usage time (the supplied

rechargeable battery)

– Clean the + and − terminal of the supplied rechargeable

battery and the charging terminal of transmitter/

headphone with a dry cloth.

– Recharge the supplied rechargeable battery after the

fully discharged.

Specifications

RF stereo transmitter (TMR-RF895R)

Modulation FM stereo

Operating frequency

863.0 MHz – 865.0 MHz

Maximum output power

< 2.5 mW

Channel Ch1, Ch2, Ch3

Transmission distance

Approx. 100 m of longest

Audio inputs Stereo mini jack

Power requirements

DC 12 V (from the supplied AC adaptor)

Dimensions Approx. 130 mm × 273 mm × 160 mm

(w/h/d)

Mass Approx. 265 g

Rated power consumption

2.0 W

Operating temperature

5°C to 35°C

Wireless stereo headphones (MDR-

RF895R)

Frequency response

10 Hz – 22,000 Hz

Power source Supplied rechargeable nickel-metal

hydride battery BP-HP800-11, or

commercially available (LR03 (size AAA))

dry batteries

Mass Approx. 275 g

Operating temperature

5°C to 35°C

Included items

RF stereo transmitter TMR-RF895R

Wireless stereo headphones MDR-RF895R

AC adaptor (12 V) (1)

Rechargeable nickel-metal hydride battery

BP-HP800-11 (1)

Stereo mini cable (stereo mini plug), 1.5 m (1)

Card warranty (1)

Operating Instructions (this manual) (1)

Design and specifications are subject to change without

notice.

Svenska

Härmed försäkrar Sony Corporation att denna utrustning

överensstämmer med direktiv 2014/53/EU.

Den fullständiga texten till EU-försäkran om

överensstämmelse finns på följande webbadress:

http://www.compliance.sony.de/

Dansk

Herved erklærer Sony Corporation, at dette udstyr er i

overensstemmelse med direktiv 2014/53/EU.

Den fulde ordlyd af EU-overensstemmelseserklæringen er

tilgængelig på følgende internetadresse:

http://www.compliance.sony.de/

Suomi

Sony Corporation vakuuttaa, että tämä laite on direktiivin

2014/53/EU mukainen.

EU-vaatimustenmukaisuusvakuutuksen täysimittainen

teksti on saatavilla seuraavassa internetosoitteessa:

http://www.compliance.sony.de/

Norsk

Herved erklærer Sony Corporation at utstyrstypen er i

samsvar med direktiv 2014/53/EU.

EU-erklæring fulltekst finner du på Internett under:

http://www.compliance.sony.de/

Français

Le soussigné, Sony Corporation, déclare que cet

équipement est conforme à la Directive 2014/53/UE.

Le texte complet de la déclaration UE de conformité est

disponible à l’adresse internet suivante :

http://www.compliance.sony.de/

Deutsch

Hiermit erklärt Sony Corporation, dass diese Funkanlage

der Richtlinie 2014/53/EU entspricht.

Der vollständige Text der EU-Konformitätserklärung ist

unter der folgenden Internetadresse verfügbar:

http://www.compliance.sony.de/

Español

Por la presente, Sony Corporation declara que este equipo

es conforme con la Directiva 2014/53/UE.

El texto completo de la declaración UE de conformidad

está disponible en la dirección Internet siguiente:

http://www.compliance.sony.de/

Nederlands

Hierbij verklaart Sony Corporation dat deze

radioapparatuur conform is met Richtlijn 2014/53/EU.

De volledige tekst van de EU-conformiteitsverklaring kan

worden geraadpleegd op het volgende internetadres:

http://www.compliance.sony.de/

Italiano

Con la presente, Sony Corporation dichiara che questo

apparecchio è conforme alla Direttiva 2014/53/UE.

Il testo completo della dichiarazione di conformità UE è

disponibile al seguente indirizzo Internet:

http://www.compliance.sony.de/

Português

O(a) abaixo assinado(a) Sony Corporation declara que o

presente equipamento está em conformidade com a

Diretiva 2014/53/UE.

O texto integral da declaração de conformidade está

disponível no seguinte endereço de Internet:

http://www.compliance.sony.de/

Slovensky

Sony Corporation týmto vyhlasuje, že zariadenie je v

súlade so smernicou 2014/53/EÚ.

Úplné vyhlásenie EÚ o zhode je k dispozícii na tejto

internetovej adrese:

http://www.compliance.sony.de/

Slovenščina

Sony Corporation potrjuje, da je ta oprema skladna z

Direktivo 2014/53/EU.

Celotno besedilo izjave EU o skladnosti je na voljo na

naslednjem spletnem naslovu:

http://www.compliance.sony.de/

Česky

Sony Corporation tímto prohlašuje, že toto zařízení je v

souladu se směrnicí 2014/53/EU.

Úplné znění EU prohlášení o shodě je k dispozici na této

internetové adrese:

http://www.compliance.sony.de/

Magyar

A Sony Corporation igazolja, hogy ez a készülék megfelel a

2014/53/EU irányelvnek.

Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a

következő internetes címen:

http://www.compliance.sony.de/

Български

С настоящото, Sony Corporation декларира, че това

оборудване е в съответствие с Директива 2014/53/EU.

Цялостният текст на ЕС декларацията за съответствие

може да се намери на следния интернет адрес:

http://www.compliance.sony.de/

Polski

Sony Corporation niniejszym oświadcza, że to urządzenie

jest zgodne z dyrektywą 2014/53/UE.

Pełny tekst deklaracji zgodności UE jest dostępny pod

następującym adresem internetowym:

http://www.compliance.sony.de/

Română

Prin prezenta, Sony Corporation declară că acest

echipament este în conformitate cu Directiva 2014/53/UE.

Textul integral al declarației UE de conformitate este

disponibil la următoarea adresă internet:

http://www.compliance.sony.de/

Ελληνικά

Με την παρούσα Sony Corporation δηλώνει ότι, αυτή η

συσκευή πληροί τους όρους της οδηγίας 2014/53/EU.

Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ

διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο:

http://www.compliance.sony.de/

Connect the AC adaptor. Charge the headphones.

To AC

outlet

Connect the A/V component, following hookup  or  below.

 Using the headphone jack of the A/V component

Stereo mini plug

Headphone jack

(Stereo mini jack)

TV, Digital music player, etc.

L (white)

R (red)

Stereo mini plug

Audio out

(L/R) jacks

Stereo system, Blu-ray Disc player, DVD player, TV*, etc.

* In case of no headphone jack.

If you cannot receive a clear audio signal

First change the radio frequency with the CHANNEL selector switch on the

transmitter, then briefly press the AUTO TUNING button on the headphones.

Noise Reduction process

The transmitter compresses the audio signal and converts it to RF signal. The headphones convert the received RF

signal to an audio signal and decompresses it. This process reduces noise picked up during transmission.

input signal

output signal

decompression

compression

dynamic range

Transmitter unit Headphones unit

RF transmission

noise level (low)

1

2 34

5

The transmitter compresses the audio signals dynamic range, then converts it to RF signal.

Noise may occur due to long distance transmission, etc.

The headphones convert the RF signal to an audio signal.

Noise may occur during conversion.

Decompression of the audio signals dynamic range reduces the noise level and improves the S/N (signal-to-noise)

ratio.

Adjust the volume.

Start playback of the A/V component.Wear the headphones.

Before listening

To reduce the risk of hearing damage, first lower the volume.

Tactile dot

Up Down

Tactile dot

 Using the audio out (L/R) jacks of the A/V component

Use a connection cable (not supplied) between the transmitter and the A/V component.

If the sound is distorted by connecting the transmitter to the A/V component’s audio out (L/R) jacks, reconnect the transmitter to the headphone jack.

If the transmitter detects no signal or no sound, check the connection of the connected A/V components, then check the audio setting of the connected A/V components.

Insert the supplied rechargeable battery BP-HP800-11 into the left housing of the headphones.

Observe the correct polarity when installing battery.

Rechargeable nickel-metal hydride

battery BP-HP800-11 (supplied)

Insert the 

end first.

(Green)

English Wireless Stereo Headphone System

WARNING

To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

To reduce the risk of fire or electric shock, do not expose

this apparatus to dripping or splashing, and do not place

objects filled with liquids, such as vases, on the apparatus.

Do not install the appliance in a confined space, such as a

bookcase or built-in cabinet.

As the main plug of AC power adaptor is used to

disconnect the AC power adaptor from the mains, connect

it to an easily accessible AC outlet. Should you notice an

abnormality in it, disconnect it from the AC outlet

immediately.

CAUTION

Risk of explosion if the battery is replaced by an incorrect

type.

Do not expose the batteries (battery pack or batteries

installed) to excessive heat such as sunshine, fire or the

like for a long time.

Do not subject the batteries to extreme low temperature

conditions that may result in overheating and thermal

runaway.

Do not dismantle, open or shred secondary cells or

batteries.

Do not expose cells or batteries to heat or fire. Avoid

storage in direct sunlight.

In the event of a cell leaking, do not allow the liquid to

come in contact with the skin or eyes. If contact has been

made, wash the affected area with copious amounts of

water and seek medical advice.

Do not use any charger other than that specifically

provided for use with the equipment.

Secondary cells and batteries need to be charged before

use. Always use the correct charger and refer to the

manufacturer’s instructions or equipment manual for

proper charging instructions.

After extended periods of storage, it may be necessary to

charge and discharge the cells or batteries several times

to obtain maximum performance.

Dispose of properly.

To avoid electrical shock, do not open the cabinet. Refer

servicing to qualified personnel only.

The AC Adaptor is not disconnected from the mains as

long as it is connected to the AC outlet, even if the unit

itself has been turned off.

High volume may affect your hearing.

The nameplate of transmitter is located on the bottom

exterior.

The nameplate of the headphones is located on the back

side of the slider.

The validity of the CE marking is restricted to only those

countries where it is legally enforced, mainly in the

countries EEA (European Economic Area) and Switzerland.

Hereby, Sony Corporation declares that this equipment is

in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is

available at the following internet address:

http://www.compliance.sony.de/

Hereby, Sony Corporation declares that this equipment is

in compliance with the UK relevant statutory

requirements. The full text of the declaration of conformity

is available at the following internet address:

https://compliance.sony.co.uk

Disposal of waste batteries and electrical

and electronic equipment (applicable in

the European Union and other countries

with separate collection systems)

This symbol on the product, the battery or

on the packaging indicates that the

product and the battery shall not be treated as household

waste. On certain batteries this symbol might be used in

combination with a chemical symbol. The chemical

symbol for lead (Pb) is added if the battery contains more

than 0.004% lead. By ensuring that these products and

batteries are disposed of correctly, you will help to prevent

potentially negative consequences for the environment

and human health which could be caused by

inappropriate waste handling. The recycling of the

materials will help to conserve natural resources. In case

of products that for safety, performance or data integrity

reasons require a permanent connection with an

incorporated battery, this battery should be replaced by

qualified service staff only. To ensure that the battery and

the electrical and electronic equipment will be treated

properly, hand over these products at end-of-life to the

appropriate collection point for the recycling of electrical

and electronic equipment. For all other batteries, please

view the section on how to remove the battery from the

product safely. Hand the battery over to the appropriate

collection point for the recycling of waste batteries. For

more detailed information about recycling of this product

or battery, please contact your local Civic Office, your

household waste disposal service or the shop where you

purchased the product or battery.

Notice for customers: the following information is only

applicable to equipment sold in countries applying EU

directives and/or UK applying relevant statutory

requirements

This product has been manufactured by or on behalf of

Sony Corporation.

EU and UK Importer: Sony Europe B.V.

Inquiries to the EU Importer or related to product

compliance in Europe should be sent to the

manufacturer’s authorized representative, Sony Belgium,

bijkantoor van Sony Europe B.V., Da Vincilaan 7-D1, 1930

Zaventem, Belgium.

Inquiries to the UK Importer or related to product

compliance in the UK should be sent to the manufacturer’s

authorized representative, Sony Europe B.V., The Heights,

Brooklands, Weybridge, Surrey KT13 0XW, United Kingdom.

This equipment has been tested and found to comply with

the limits set out in the EMC regulation using a connection

cable shorter than 3 meters.

The unit is not waterproof. If water or foreign objects enter

the unit, it may result in fire or electric shock. If water or a

foreign object enters the unit, stop use immediately and

consult your nearest Sony dealer. In particular, be careful

in the following cases.

– When using the unit around a sink, etc.

Be careful that the unit does not fall into a sink or

container filled with water.

– When using the unit in the rain or snow, or in humid

locations

– When using the unit while you are sweaty

If you touch the unit with wet hands, or put the unit in

the pocket of a damp article of clothing, the unit may

get wet.

Note on static electricity

Static electricity accumulated in the body may cause mild

tingling in your ears. To reduce the effect, wear clothes

made from natural materials, which suppress the

generation of static electricity.

For details on the effect of contact to the human body

from the mobile phone or other wireless devices

connected to the unit, refer to the instruction manual of

the wireless device.

This product (including accessories) has magnet(s) which

may interfere with pacemakers, programmable shunt

valves for hydrocephalus treatment, or other medical

devices. Do not place this product close to persons who

use such medical devices. Consult your doctor before

using this product if you use any such medical device.

Checking the included

items

RF stereo transmitter

TMR-RF895R (1)

AC adaptor (1)

Wireless stereo

headphones MDR-RF895R

(1)

Stereo mini cable (stereo

mini plug), 1.5 m (1)

Rechargeable nickel-metal

hydride battery BP-

HP800-11 (1)

Features

Thank you for purchasing the Sony MDR-RF895RK

Wireless Stereo Headphone System. Before operating the

unit, please read this manual thoroughly and retain it for

future reference.

Some features are:

– Wireless system that allows you to listen to a

programme free the restriction of a cable

– Up to 100 meters reception range*

– High fidelity sound reproduction

– New mode “VOICE” for clear hearing of personal voice

range

– Noise reduction system to reproduce a clear sound with

minimum transmission noise

– Comfortable fit

– Smooth and Comfortable Earpads

– Long playback time (maximum 20 hours)

– Easy recharging function with secure charging

mechanism

– Rechargeable Battery

– Automatic tuning on headphones for optimum signal

reception

– 3 transmission channels available

– Volume control function and sound effect function on

the headphones

* Transmission distance varies depending on conditions of

use

(Red)

(Off)

Complete when indicator

turns off.

Check the CHARGE/

RED indicator lights

up red.

4

2

3

After use

Turn off the power of the headphones.

About sending RF signals

The transmitter starts sending RF signals automatically

when it detects an audio signal from the connected

component. Note that;

– Noise may occur depending on the transmitter position

and room conditions. It is recommended to place the

transmitter in a location that produces the clearest

sound.

– If the transmitter is placed on a metallic table, you may

hear noise, or the reception range may decrease. Do

not place on a metallic table.

If no signal or low signal is input

for about 4 minutes

When no signal is input for about 4 minutes, the

transmitter turns off automatically*. The POWER indicator

of the transmitter blinks for 4 minutes, then turns off. The

transmitter restarts after receiving an audio signal again.

The transmitter may also turn off if low signal is input for

about 4 minutes. In this case, raise the volume of the

connected A/V component within the range where the

sound is not distorted, then lower the volume of the

headphones.

* If signal noise is output from the connected A/V

component, the transmitter may not turn off, even

when no audio signal is input.

7

5 6

1

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Sony MDR-RF895RK Headphone. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sony. They might be able to provide an original manual. Are you looking for the manual of your Sony MDR-RF895RK Headphone in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Sony Headphones
More manuals of Headphones

Frequently Asked Questions about Sony MDR-RF895RK Headphone

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Sony MDR-J12G Headphone

Manual

Sony DR-EX61iP Headphone

Manual

Sony MDR-RF815RK Headphone

Manual

Sony MDR-AS30G Headphone

Manual

Sony MDR-NWBT10 Headphone

Manual

Sony MDR-RF950RK Headphone

Manual

Sony MDR-EX255AP Headphone

Manual

Sony WI-C600N Headphone

Related categories