Home > Camping & Outdoor > Tents > Skandika Tents > Skandika Frontier Tent

Manual Skandika Frontier Tent

Need a manual for your Skandika Frontier Tent? Below you can view and download the PDF manual for free in English. This product currently has 8 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Thank you for choosing your new tent from the Skandika range. It provides you with a lot of room and high level of comfort in the well-known superior quality of Skandika.

Before you go on holiday with the new tent, please built it once.

Assembly instructions

Please follow these instructions point by point in the given order.

•

Poles and components: Remove all contents from tent bag

•

Extent all tent poles carefully. Each fibreglass pole is colour coded to match the part of the tent that it belongs to.

•

Unfold inner tent and rain fly and lay on ground

Rain Fly

•

Insert each fibreglass pole through each pole sleeves along the outside of the rain fly

•

To assemble the main door entrance, assemble the 3 shortest fibreglass poles and insert through the poles sleeves around the door

•

Insert the top end of the vertical door pole into the black plastic elbow and the closest end of the horizontal door pole into the other end of the black plastic elbow – repeat for the door poles on

the other side of the door

•

At the bottom ends of each fibreglass pole, insert the corresponding pins (located at the bottom edges of the rain fly) into the ends of each fibreglass pole

•

Stake down the rain fly through the appropriate PP webbing loops to secure it

•

Stake down the guy ropes which are attached to the tabs on the outside of the rain fly – this will keep it more stable in strong winds

•

There is a removable tub style water proof floor for the rain fly – simply lay it out on the inside of the tent and stake it down at the corners

•

The rain fly is now assembled

Inner tent

•

Take each inner tent to the appropriate area on the inside of the rain fly

•

Hook the inner tents, 1 by 1, into the inside of the rain fly by staking down the bottom rear corners and working your way forward to the top using the plastic rings and toggles – do this for the

desired number of inner tents – by leaving inner tents out, you can increase the storage or living capacity of the tent as well as shed weight

Attention

Skandika tents are very easy to pitch. If one step of the assembly seems difficult, don‘t use force, but locate the error.

Care

•

When packing the tent make sure that it is completely dry, otherwise there is a danger of mildew and rotting.

•

Always pack poles and tent pegs separately from inner and outer tent.

•

Prior to folding, clean the basement of the inner tent.

•

Use a soft sponge and clear water only to clean the outer tent canvas. Don‘t use any cleaning agent, for they may be harmful to the impregnation.

•

Never pull tent pegs out by means of rings or tensioning ropes.

Nous nous réjouissons que vous ayez choisi une tente SKANDIKA. Ces tentes offrent beaucoup d’espace et de confort et ceci en qualité superieure marqué Skandika.

Pour ne pas courir de risque nous vous conseillons de faire un essai de montage de la tente avant de partir en vacances.

Montage

Veuillez procéder point par point, car l’ordre des differentes étapes est important.

•

Tiges et accessoires : éliminez le contenu complet du sac de tente

•

bouchez prudemment toutes les barres de tente. Chaque barre de tente est de couleur marquée conformément aux canaux de tige correspondants à la tente extérieure.

•

ètalez le tapis de sol de tente et le tapis de l’extérieur sur un sol lisse autant que possible propre.

Tentes extérieures

•

conduisez chaque barre de tente par les canaux de tige de la tente extérieure

•

Pour construire l'entrée , conduisez les 3 plus courtes barres de tente dans les canaux de tige se trouvant prés de la porte

•

conduisez la fin supérieure de la barre de porte verticale dans le coude de plastique noir et la fin de l’autre barre de porte horizontale dans l'autre fin du coude de plastique noir. - répéter cela la

pour les barres de la porte se trouvant dans l’autre sens de la porte

•

Introduisez Sur le côté inférieur des barres de tente, goupilles les correspondants (se trouvant en bordure de la tente extérieure).

•

Afin d’être rassuré placez la tente extérieure par les circuits fermés convenables

•

assurez la tente avec les lignes d'élimination qui sont attachées aux circuits fermés de la tente extérieure - cela donne une stabilité plus élevée si le vent souffle fort

•

Il y a un tapis de sol imperméable à l'eau assorti pour la tente extérieure - étalez le simplement à l'intérieur de la tente et l’ attacher sur les côtés

•

La tente extérieure est maintenant établie ou constuite

Tentes intérieures

•

apportez chaque partie de la tente à l’intérieur à la place convenable dans la tente extérieure

•

accrochez la tente à l'intérieur en dessous de la tente extérieure commençant du dos inférieur et travaillez de L’avant vers l’arriére sous l'utilisation des Clips se trouvant sur la paroi externe de

la tente à l'intérieur ce qui est l'équivalent avant au dessous de la tente extérieure – faites cela pour le nombre nécessaire de tentes à l'intérieur - si vous omettez ou annuler la tente à l'intérieur,

ceci vous permettra d’ augmenter la surface de logement ou de magasin et ainsi le poids sera moins élévé.

Attention

Les tentes Skandika sont très faciles à monter. En cas de difficulté ne forcez pas mais cherchez la raison possible et la solution à la difficulté avant de continuer.

Entretien

•

Lors du démontage et pliage, prendre le temps de sécher chaque élément afin d’éviter toute moisissure et décomposition.

•

Toujours ranger les pointes et sardines séparément des toiles intérieures et extérieures.

•

Nettoyer le fond de la tente intérieure avant de la plier.

•

Nettoyer d’éventuelles salissures sur la tente à l’aide d’un linge doux et de l’eau claire. Ne pas utiliser de détergent car ceci pourrait détériorer l’enduction protectrice.

•

Ne pas tirer sur les cordes d’ancrage pour extraire les sardines et pointes du sol.

Rating

Let us know what you think about the Skandika Frontier Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Skandika Frontier Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Skandika Frontier Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Skandika Frontier Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Skandika. They might be able to provide an original manual. Are you looking for the manual of your Skandika Frontier Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Skandika
Model	Frontier
Category	Tents
File type	PDF
File size	0.15 MB

All manuals for Skandika Tents
More manuals of Tents

Frequently Asked Questions about Skandika Frontier Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more