Manual Siemens WT44E107DN Dryer

Manual

7

Programme overview also see Page 5

Sort the laundry according to type of textile and fabric. Fabrics must be suitable for tumble drying.

After drying...

ciron laundry  lightly iron laundry @cdo not iron laundry cmangle laundry

PROGRAMMES TEXTILE TYPE AND INFORMATION

*Ê Cottons

max. 7 kg

Hard-wearing fabrics, boil-resistant fabrics made of cotton or linen.

*Ï Easy-Care

max. 3.5 kg

Non-iron laundry made of synthetic fibres and blended fabric, easy-care cotton.

Ô Iron Dry c÷@c

Fabrics suitable for ironing (iron fabrics in order to avoid creasing).

· Cupboard Dry @

Single-layer fabrics.

 Cupboard Dry Plus @

Fabrics made of thick, multilayered items of clothing.

 Time programme

warm 20min

max. 3 kg

Pre-dried, multi-layered, sensitive fabrics made of acrylic fibres, or separate small items of laundry. Also for subsequent

drying.

A Super 40’

max. 2 kg

Laundry made of synthetic fibres, cotton or blended fabrics (for example) that needs to be dried quickly. The values

may differ from the those specified depending on the type of fabric, mixture of laundry to be dried, residual moisture in

the fabric and loading capacity.

üOutdoor

max. 1.5 kg

Fabrics with membrane coating, water-repellent fabrics, functional clothing, fleece fabrics (dry jackets/trousers with

removable internal lining separately).

*Dryness levels can be selected individually a÷Cupboard Dry Plus, ·üCupboard Dry and Ô Iron Dry (depending on the model). Degree of dryness can be finely adjusted;

multi-layered textiles require a longer drying time than single-layered items of clothing. Recommendation: Dry separately.

9510 / 9001096712

*1096712*

BSH Hausgeräte GmbH

Carl-Wery-Straße 34

81739 München-GERMANY

WT44E107DN

Manufactured by BSH Hausgeräte GmbH under Trademark License of Siemens AG

8

Installation

– Delivery specification: dryer, instructions for installation and use, woollens basket

(depending on model).

– Check dryer for transport damage.

– The dryer is very heavy. Do not attempt to lift it on your own.

– Be careful to avoid sharp edges.

– Do not lift the dryer by any of the protruding parts (e.g. the door) as they may break off.

– Do not set up in a room that is susceptible to frost. Freezing water may cause damage.

– If in doubt, have the appliance connected by an expert.

Setting up the dryer

– The appliance plug must always be accessible.

– Ensure that the appliance is installed on a clean, level

and solid surface.

– Keep the cooling grille at the front of the dryer

unobstructed.

– Keep the area around the dryer clean.

– Make the dryer level using the threaded feet

and a spirit level.

Do not remove the threaded feet under any

circumstances.

Mains connection see safety instructions a Page 11.

– Connect to an AC earthed socket. If in doubt have the socket checked by an expert.

– The mains voltage and the voltage shown on the rating plate (a Page 9) must correspond.

– The connected load and necessary fuse protection are specified on the rating plate.

Converting the installed load Note the fuse protection of the socket.

10/16 Amps

Frost protection / Transport

Preparation

1. Empty the condensate container a page 4.

2. Select any programme using the programme selector.

3. Press the  start button a condensation is pumped into the container.

4. Wait 5 min. and then empty the condensate container again.

5. Turn the programme selector to Off.

1.

Take all accessory parts

out of the drum.

The drum must be empty.

Make sure that the air

inlet remains unobstructed

Clean and level

2.

3.

turn to

Off

press and hold selection

then turn 3 x to the right

turn to

Off

set

amperage

1 x to the

right

Feedback (depending on model):

off

flashes

10 A

16 A

Do not operate the dryer if

there is a danger of frost.

Do not set up the dryer behind a door or sliding

door as this may obstruct or prevent the dryer door

from opening. This will prevent a potentially fatal

danger to children from locking themselves in.

9

Technical data

ʠ

Dimensions (DxWxH) 60 x 60 x 85 cm (height adjustable)

Weight approximately 45 kg

Max. capacity 7 kg

Condensate container 4.2 l

Connection voltage

Connected load

Fuse protection see appliance rating plate

Ambient temperature

Product number/

Production number

You can find the rating plate on the back of the dryer.

Power consumption when switched off 0.10 W

Power consumption when ready for use (left-on mode) 1.00 W

Consumption values table (The value on the label is achieved at the maximum heat setting.)

Programme

Spin speed which is

used for spinning

the laundry

Duration** Energy consumption**

ÊüCottons

7 kg 3.5 kg 7 kg 3.5 kg

10 A 16 A 10 A 16 A 10 A 16 A 10 A 16 A

·üCupboard Dry* 1400 rpm 112 min 98 min 93 min 63 min 3.54 kWh 3.54 kWh 1.95 kWh 1.95 kWh

1000 rpm 131 min 115 min 100 min 70 min 4.13 kWh 4.13 kWh 2.27 kWh 2.27 kWh

800 rpm 150 min 133 min 116 min 86 min 4.72 kWh 4.72 kWh 2.79 kWh 2.79 kWh

ÔüIron Dry* 1400 rpm 93 min 69 min 78 min 48 min 2.55 kWh 2.55 kWh 1.78 kWh 1.78 kWh

1000 rpm 111 min 82 min 87 min 57 min 3.22 kWh 3.22 kWh 2.23 kwh 2.23 kwh

800 rpm 130 min 94 min 98 min 68 min 3.90 kWh 3.90 kWh 2.81 kwh 2.81 kwh

ÏüEasy-Care 3.5 kg 3.5 kg

·üCupboard Dry* 800 rpm 48 min 42 min 1.35 kWh 1.35 kWh

600 rpm 60 min 51 min 1.65 kWh 1.65 kWh

* Programme setting for testing in accordance with the applicable EN61121 standard.

** The values may differ from those specified, depending on the type of fabric, composition of laundry to be dried, residual moisture in the fabric, the degree

of dryness that has been set and the amount of laundry being loaded.

Most efficient programme for cotton fabrics

The following "standard cottons programme" (identified with ) is suitable for drying normal, wet cotton laundry and is most efficient in terms of

its combined energy consumption for drying wet cotton laundry.

Standard programme for cottons in accordance with current EU regulation 932/2012

Programme Load Energy consumption Programme duration

Cottons Cupboard Dry 7 kg/3.5 kg

10 A 16 A 10 A 16 A

4.13 kWh/2.37 kWh 4.13 kWh/2.37 kWh 131 min/100 min 115 min/70 min

Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU.

Optional accessories (from after-sales service using order number, depending on model)

Platform

For easier loading and unloading. The basket contained in the drawer can be used to carry the laundry.

Washer-dryer stack connection set

The dryer can be placed on top of a suitable washing machine with the same width and depth to save space. The dryer must be fastened

to the washing machine using this connection set. With pull-out worktop: WZ 20300

Connection fittings for condensation outlet

The condensation is conveyed directly via a hose.

Installation underneath the worktop

Instead of the appliance covering plate, you must have a metal cover fitted by a specialist.

WZ

20500

WZ

20310

WZ

20160

WZ

20290

10

What to do if ...

If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales service. We

will always find an appropriate solution and will avoid unnecessary visits by engineers. Trust the

expertise of the manufacturer and rest assured that the repair will be carried out by trained service

technicians using original spare parts. The contact details of your local after-sales service can be

found in the enclosed after-sales service directory, or by calling one of these numbers:

– GB 0344 892 8999 (Calls charged at local or mobile rate.)

– IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)

When contacting the after-sales service, please quote the appliance's product number (E no.) and

production number (FD) (see the inside of the door).

Set the programme selector to Off and remove the appliance plug from the socket.

ʠ

The  start indicator lamp

does not light up.

Mains plug plugged in?

Programme selected?

Check the socket fuse.

ʠ

The display panel light and

indicator lights (depending on

model) go out and the

 start indicator light flashes.

Energy-saving mode is activated a see the separate Energy-saving

mode instructions.

ʠ

The Í(Empty water) and

start indicator lamp flash.

Empty the condensate container.

If featured, check hose for condensation outlet.

ʠ

Thex (Clean filter) and

 start indicator lamp flash.

Clean the fluff filter and/or air cooler under running water aPage 4/

6.

ʠ

Dryer does not start.  start button selected?

Door closed?

Programme set?

Ambient temperature greater than 5°C?

ʠ

Water is running out. Align dryer horizontally.

Clean air cooler seal.

ʠ

The door opens by itself. Push the door closed until you hear it engage.

ʠ

Creasing. Laundry load exceeded?

Remove articles of clothing immediately after the end of the

programme, hang up and pull into shape.

Unsuitable programme selected a Page 7.

ʠ

Laundry is not dried correctly

or is still too damp.

After the end of the programme, warm laundry feels damper than it

actually is. Spread the laundry out and allow the heat to disperse.

Finely adjust the dryness level – this extends the drying time but

does not increase the temperature. Your laundry will become drier.

Select a programme with a longer drying time or increase the drying

level. This does not increase the temperature.

Select a time programme for extended drying of laundry that is still

damp.

If you have exceeded the maximum load for the programme, the

laundry may not be dried correctly.

Clean the moisture sensor in the drum. A fine layer of limescale may

adversely affect the performance of the sensors and your washing

will not dry properly.

Drying has been interrupted as a result of a power cut, because the

condensate container is full or because the maximum drying time has

been exceeded.

ʠ

Drying time too long. Rinse the fluff filters under running water a Page 4.

Insufficient supply of air a ensure that air can circulate.

Air inlet possibly blocked a Clear inlet a Page 8.

Ambient temperature higher than 35 °C a ventilate the room.

ʠ

The humidity in the room

increases significantly.

Make sure the room is sufficiently ventilated.

ʠ

Power failure. Remove laundry from the dryer immediately and spread out.

This allows the heat to dissipate. Be careful as the door, the drum

and the laundry may be hot.

ʠ

One or more indicator lights

for programme status are

flashing.

Clean filter and air cooler a Page 4/6.

Check installation conditions a Page 8.

Switch off, leave to cool down, switch on again, restart programme.

11

Safety instructions

Emergency

– Pull the appliance plug out of the socket immediately or disconnect the fuse.

ONLY use

the dryer...

– in rooms inside the house.

– to dry fabrics.

The dryer

must NEVER...

– be used for other purposes than those described above.

– be modified in terms of its technology or attributes.

Dangers

– The dryer must not be used by children or persons who have not been instructed

in its use.

– Do not leave children unsupervised near the dryer.

– Keep pets away from the dryer.

– Remove all objects from pockets. Make especially sure that cigarette lighters are

removed as they constitute an a explosion hazard.

– Do not lean or sit on the door a risk of tipping.

Installation

– Secure loose cables a tripping hazard.

– Do not operate the dryer if there is a risk of frost.

Mains

connection

– Connect the dryer according to specifications to an AC earthed socket, as

otherwise it cannot be guaranteed that the appliance is completely safe.

– The cable cross-section must be sufficient.

– Only use earth-leakage circuit breakers with the following symbol:

– The appliance plug and socket must be compatible.

– Do not use multiple plugs/couplings and/or extension cables.

– Do not hold the appliance plug with wet hands a risk of electric shock.

– Never pull the appliance plug out of the socket by its cable.

– Do not damage the mains lead a risk of electric shock.

Operation

– Only load the drum with laundry. Check the contents before you switch the dryer

on.

– Do not use the dryer if the laundry has been in contact with solvents, oil, wax,

grease or paint (e.g. hair setting spray, nail polish remover, stain remover,

cleaning solvent, etc.) a fire/explosion hazard.

– The tumble dryer is not to be used if industrial chemicals have been used for

cleaning.

– Dust (e.g. coal dust, flour) poses a danger: do not use the dryeraexplosion

hazard.

– Do not turn off the dryer until the drying process ends, unless the laundry will be

removed quickly and spread out, so that the heat can dissipate.

– Do not put laundry containing foamed material/rubber in the dryer

a elastic material may be destroyed and the dryer may be damaged due to

possible deformation of the foamed material.

– Light things, such as long hair, may be sucked into the air inlet of the dryer

a risk of injury.

– Final part of a tumble dryer cycle occurs without heat (cool down cycle), to

ensure that the items are left at a temperature that ensures that the items will not

be damaged.

– Switch off the dryer once the programme has ended.

– The exterior of the appliance's rear panel becomes very hot during

operation. Never touch the hot surface of the appliance's rear panel.

Keep children away from the appliance a risk of burns.

– Condensation is not drinking water and may be contaminated with fluff.

Defect

– Do not use the dryer if it is defective or if you suspect it is.

Repairs must only be carried out by the after-sales service.

– Do not use the dryer if the mains cable is defective. To avoid danger, only have

the defective mains cable replaced by the after-sales service.

– Always pull the mains plug out of the socket before changing the bulb for the

interior light a risk of electric shock.

Spare parts

– Only use genuine spare parts and accessories for safety reasons.

Disposal

– Dryer: pull out the appliance plug, then cut off the mains cable from the

appliance. Dispose of at municipal waste disposal facility.

– Packaging: do not leave children alone with packing partsa risk

of suffocation.

– All materials are environmentally sound and can be reused.

Dispose of in an environmentally-responsible manner.

siemens-home.com/welcome

Register

your

product

online

Tumble dryer

WT44E107DN

en Operating and installation instructions

Observe the safety instructions on page 11!

Read these instructions and the separate Energy-saving

mode instructions before switching on the dryer.

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Siemens WT44E107DN Dryer. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Siemens. They might be able to provide an original manual. Are you looking for the manual of your Siemens WT44E107DN Dryer in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Siemens Dryers
More manuals of Dryers

Frequently Asked Questions about Siemens WT44E107DN Dryer

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Siemens WT46B268DN Dryer

Manual

Siemens WP30A2X0HK Dryer

Manual

Siemens WT45HVB6DN Dryer

Manual

Siemens WQ32G2ALDN Dryer

Manual

Siemens WQ45G2ABDN Dryer

Manual

Siemens WT44E104DN Dryer

Manual

Siemens WQ45G209GR Dryer

Manual

Siemens WT43HVP6DN Dryer

Related categories