Manual Sencor SSI 6100GR Iron

Manual

- 5 -

04/2021

Copyright © 2021, Fast ČR, a.s.

EN

Steam iron

User'smanual

■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user’smanual.

Keep this user'smanual in asafe place where it can be easily retrieved for future use.

In the event that you hand this appliance over to somebody else, make sure to also

include this user'smanual.

■ Carefully unpack the appliance and take care not to throw away any part of

the packaging before you find all its parts. We recommend saving the original

cardboard box, packaging material, purchase receipt and responsibility statement

of the vendor or warranty card for at least the duration of the legal liability

for unsatisfactory performance or quality. In the event of transportation, we

recommend that you pack the appliance in the original box from the manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 Handle

A2

– Water spraying button

A3

– Steam impulse button

A4 Steam release regulator

– steam release off

– Steam release on full

A5 Water tank cap

A6 Water spraying nozzle

A7 Ironing soleplate

A8 Swivel power cord end

Limits twisting and tangling of the

power cord.

A9 Heating indicator

A10 Stand

A11 Temperature control knob

A12 SelfClean button for self cleaning to

remove limescale deposits

A13 Transparent water tank

A14 Water tank filling container

BEFORE FIRST USE

■ Before first use, remove all packaging materials including promotion stickers and

labels from the iron. Wipe the soleplate with alightly dampened cloth before first

use and then wipe dry.

■ Using adry or lightly dampened cloth, also clean the outer parts of the iron and

then wipe it dry.

Attention:

Never submerge the iron in water or any other liquid!

OPERATION

FILLING THE WATER TANK

■ The iron is intended to be filled with tap water. Limescale deposits may quickly form,

if you live in an area with hard or very hard water. To extend the lifetime of the iron, it

is recommended to mix the tap water with distilled water. The ratio of distilled water

to tap water is as follows:

– 1:1 for medium hard water

– 2:1 for hard water

– 3:1 for very hard water

Note:

Your local water utility will provide information about the water hardness

in your area.

Attention:

Never add water softeners, vinegar, starch, descaling agents,

perfumes or other additives to the water.

■ Before filling the water tank, the iron must be disconnected from the power socket

and the steam release regulator must be set to position

(steam output off).

■ Fill the included container with water. Flip open the cap of the filling opening and

slightly tilt the iron. Slowly pour the water from the container through the filling

opening into the water tank. Make sure that the water level does not rise above the

maximum water level mark on the water tank. To correctly assess the water level, it

is necessary to stand the iron in the upright position.

■ After filling the water tank, close the filling opening lid and put the iron in the

upright position. In the event that you spilled any water while filling, thoroughly

dry the iron.

SETTING TEMPERATURE ACCORDING TO TEXTILE

■ When setting the temperature, pay attention to the material composition of

the textile. It is recommended to sort the laundry according to the international

symbols shown on the textile, according to the type of textile or according to the

recommendations of the manufacturer on the label. The number of dots inside the

international symbol corresponds to the number of dots on the temperature control

knob.

INTERNATIONAL

SYMBOL

FABRIC TYPE

SUITABLE FOR

CONTINUOUS

STEAMING

STEAM

BOOST

SPRAYING

Synthetic fabric

(acrylic, acetate,

polyester, viscose, etc.)

No No Yes

Cotton with addition

of other types of

fibres, silk, wool, wool

with addition of other

types of fibres, etc.

No No Yes

Corduroy, cotton,

denim and linen

Yes Yes No

Fabric, that should not be ironed

TURNING ON

■ Connect the power cord to apower socket. Turn the temperature control knob to

the required temperature setting. The indicator will be lit, which means that the

iron is heating up. When the iron'sthermostat reaches the correct temperature, the

heating indicator will turn off. The iron is now ready for use.

Note:

The heating indicator will spontaneously turn on and off during use. This

is completely normal.

In the event that the temperature control knob was not set to the MIN

position the after previous use of the iron, and was left at one of the

temperatures, the heating indicator will be lit immediately when the

power cord is plugged into the power socket.

IRONING WITHOUT STEAMING

■ This function enables the use of the iron with or without water in the water tank,

however, the steam release regulator must be set to position

.

Note:

When used for the first time, the iron may emit smoke, which is non-toxic.

You may also hear noises created by expanding plastics. This is normal.

After ashort time, the iron will stop emitting smoke and making noises.

IRONING WITH STEAM

Attention:

In order to iron with steam, the water tank must be filled with

water.

CONTINUOUS STEAMING FUNCTION

■ For iron with steam, slide the steam release regulator from position

towards

position

. Set the position of the regulator based on the required steam intensity.

The more the steam regulator is moved to the right, the stronger the steam intensity.

■ Wait until the heating indicator turns off.

■ The steam release regulator can be moved at any time while ironing.

■ For all standard ironing, it is recommended to use the middle settings of the steam

release regulator. Only when ironing linen fabrics, strong silk or similar fabrics is it

recommended to set the steam release regulator to maximum.

Note:

The iron continuously emits steam only when you keep moving it. When

you put it aside, the emission of steam will stop.

■ Setting the steam release regulator to position

, deactivates the steam function.

STEAM IMPULSE FUNCTION

■ Use this function when ironing with continuous steam is insufficient. Press the

steam impulse button

to generate astrong flow of steam, which can straighten

out even very crumpled up textiles.

■ Wait at least 3 seconds before pressing the button again. If the heating indicator

starts flashing, wait until it turns off and only then press the button.

■ The steam impulse function can also be used when ironing hanging textiles (e.g.

curtains, garments hanging on coat hangers, etc.). Use one hand to gently tension

the fabric and vertically move the iron from bottom up. Press the steam impulse

button to achieve vertical bursts of steam. Do not hold the steam impulse button

continuously and do not consecutively use it more than 10 times.

Attention:

Do not use the steam function for silk and synthetics so as not to

damage the fabric.

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Sencor SSI 6100GR Iron. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sencor. They might be able to provide an original manual. Are you looking for the manual of your Sencor SSI 6100GR Iron in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Sencor Irons
More manuals of Irons

Frequently Asked Questions about Sencor SSI 6100GR Iron

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Sencor SSI 5421TQ Iron

Manual

Sencor SSI 5420RD Iron

Manual

Sencor SSI 2800BL Iron

Manual

Sencor SSI 0710VT Iron

Manual

Tefal FV5781E1 Iron

Manual

Continental Edison CECV2400BB Iron

Manual

Mistral MIR068 Iron

Manual

Boss B319 Topaz Iron

Related categories