GB
7
GB
6
The CD disc changer can contain up to three 12 cm or 8 cm
compact discs without using an adapter.
Never force the compact disc carrousel when opening and clos-
ing the compartment.
Never press down or place objects on the carrousel.
Always treat your compact discs with care; refer, if necessary, to
the section entitled “Precautions When Using Compact Discs” on
page 19.
Switch the system on by pressing POWER.
Press the OPEN/CLOSE button on the front panel (or on the
remote control).
Result:
The compartment opens.
Place one or two discs in the front slots of the carrousel, with the
label on the discs facing upwards.
Check that the compact disc has been correctly inserted in
the holder before closing the compartment.
If you wish to load a third compact disc, press the DISC CHANGE
button on the front panel (or DISC SKIP on the remote control).
Result:
The carrousel rotates by 120°.
Close the compartment by pressing the OPEN/CLOSE button again.
If you wish to start playing a disc directly, you can also
proceed as follows.
To play... Press...
Disc 1 CD ( ) or DISC SELECTOR 1
Disc 2 DISC SELECTOR 2
Disc 3 DISC SELECTOR 3
Result: The compartment closes automatically and the disc selected
starts playing.
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using it,
to prevent dust from entering.
You can load or unload compact discs when the radio,
tape or auxiliary source function is selected.
When you have loaded at least one compact disc into the
player, you can start listening to it.
Always treat your compact discs with care; refer, if necessary, to the
section entitled “Precautions When Using Compact Discs” on page 19.
Switch the system on by pressing POWER.
Select the CD function by pressing CD on the front panel or
FUNCTION one or more times on the remote control.
Load one or more discs.
Press CD ( ) on the front panel or on the remote control.
If you have loaded more than one compact disc, they will
be played in turn.
Adjust the volume as required by:
Pressing the VOLUME or on the front panel
or
Pressing the VOL. + or - buttons on the remote control
To pause temporarily during playback, press CD ( ).
Press CD ( ) again to continue disc playback.
Press when you have finished.
When playing a disc, you can load new discs without
stopping the current one. To do so, open the compartment
by pressing DISC CHANGE and load new discs in the other
two vacant slots (not the one containing the disc that you
are playing). You cannot rotate the carrousel during
playback.
When no discs are loaded, the “NO DISC” indication is
displayed.
The CD player stops automatically after playing the three
discs, if the CD REPEAT function has not been selected.
Listening to a Compact Disc
1
2
3
4
5
6
7
Loading and Changing Compact
Discs
1
2
3
4
5
6
To select the basic functions on your mini-component system
(radio, compact disc, cassette or auxiliary source), press the
corresponding buttons on the front panel or FUNCTION on the
remote control.
Depending on the feature that you select, the multi-function
buttons illuminate.
Switch the system on by pressing Power.
Result: The function selected just before the system was last
switched off is reactivated.
Press FUNCTION the appropriate number of times to select one of
the 4 functions available:
TUNER (radio)
CD (compact disc)
AUX (auxiliary source)
Result:
The various sub-options available are indicated by the symbols
displayed on the multi-function buttons; these symbols change
according to the function that you select.
You can view the various functions available on your system.
Press the DEMO button.
Result:
The various functions available are listed in turn on the display.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate
sections.
To cancel this function, press DEMO again.
Your system is equipped with a clock which allows you to
turn your system on and aff automatically. You should set the
clock:
When you purchase the mini-compact system
After a power failure
After unplugging the unit
Remember to reset the time when the clock changes from
winter to summer time and vice versa.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing POWER.
Press TIMER/CLOCK twice.
Result:
CLOCK is displayed.
Press PROGRAM/SET.
Result:
The hour flashes.
To... Press...
Increase the hours
PRESET/MANUAL UP
Decrease the hours
PRESET/MANUAL DOWN
When the correct hour is displayed, press PROGRAM/SET.
Result:
The minutes flash.
To... Press...
Increase the minutes
PRESET/MANUAL UP
Decrease the minutes
PRESET/MANUAL DOWN
When the correct time is displayed, press PROGRAM/SET.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another function,
by pressing TIMER/CLOCK once.
Setting the ClockMenu System
Viewing the Various Functions on
Your System
2
1
2
1
1
2
3
4
5
6
7
Join the conversation about this product
Here you can share what you think about the Samsung MAX-900 CD Player. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.