Home > Household appliances > Glasswashers > Sammic Glasswashers > Sammic UX-120 Glasswasher

Manual Sammic UX-120 Glasswasher

Need a manual for your Sammic UX-120 Glasswasher? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Operation

User’s manual — 2900455/1 7

[Models with electric dispensers] Dispensing and hardness set -

tings

To enter this settings section, when turning on the machine, press

and hold the START button in the first few seconds while the

program is loading.

• DET DOSE g/l: dose of detergent in g/L.

• DET FILL: detergent priming: ON-OFF (LCD: "on-00 ").

a) Press PROG or OPTIONAL to activate ( on ) the detergent fill -

ing process.

> The detergent dispenser turns on for a few seconds and then returns to

OFF (00 ).

b) Press PROG or START again until the pipe is completely

filled.

• R AID DOSE g/L: rinse aid dose in g/L.

• RINSE AID FILL: rinse aid priming: ON-OFF ( on-00 ).

a) Press PROG or OPTIONAL to activate ( on ) the detergent fill -

ing process.

> The detergent dispenser turns on for a few seconds and then returns to

OFF (00 ).

b) Press PROG or START again until the pipe is completely

filled.

• [D models] WATER HARDNESS: enter the degree of water hard -

ness (unit: French degree °fH, display shows "°F"). With this data

the machine programs the regeneration frequency necessary to

inform by means of the icon

Other activations

• [B models]

WATER LEVEL

(qualified technicians only): activa -

tion of tank water level display: ON-OFF (LCD: "on-00 ").

– Cycle times and texts are not displayed.

• [C models]

B.PRES MANUAL

: manual activation of rinse pump:

ON-OFF (on-00) .

2.7.2 Other settings

To enter this settings section, when switching on the machine,

press and hold down the OPTIONALS button in the first few

seconds while the program is loading.

•

LANGUAGE

•

RINSE TIME

: modification of the time in time range between -2

and +2

seconds (s).

•

ENERGY SAVING

: ON-OFF (LCD: "on-00 ")

•

SOFT START

: ON-OFF (on-00 )

Progressive start of the wash

motor pump.

•

TEMP UNITS

: selection of temperature units °C/°F.

•

REGEN COUNTER

: displays the number of regeneration cycles

performed.

•

CYCLE COUNTER

: displays the number of wash cycles per -

formed.

•

INITIAL SETTINGS

: to restore the initial parameters of the

machine.

2.7.3 Screen test

To check that the LCD display segments are working:

1) When switching on the machine, press and hold down the

START and OPTIONAL buttons simultaneously in the

first few seconds while the program is loading.

⇒ All the screen icons light up.

2.7.4 Model settings

If the electronic board is changed or de-configured, the machine

requires the model to be adjusted by means of the following adjust -

ment section:

1) When switching on the machine, press and hold in the first

few seconds while the program is loading.

2) To choose the model number, press the buttons PROG and

OPTIONAL .

3) Confirm your selection by pressing the START button .

3 Operation

ℹ Information

The values shown are equivalent to two digits to one decimal

place. Examples:

– 3.5 g/L: " 35 " is displayed.

– 0.5 g/L: " o5 " is displayed.

Inlet water

hardness

Number of regeneration cycles

Manual cycles Automatic cycles

UX-40 D UX-50 D UX-50 CD UX-120 CD

0-20 °fH 93 112 10 20

21-30 °fH 57 72 7 15

31-40 °fH 33 49 5 10

41-50 °fH 25 29 4 6

Model

Number

Model Model

Number

Model

0 UX-40C 13 UX-50 BC

1 UX-40BC 14 UX-50 BCD

2 UX-40 22 UX-100, UX-120

3 UX-40 B 23 UX-100 B, UX-120 B

4 UX-40 D 24 UX-120 V

5 UX-40 BD 25 UX-120 BV

7 UX-50 26 UX-120 C

8 UX-50 B 27 UX-120 BC

9 UX-50 D 28 UX-120 BCD

10 UX-50 BD 32 UX-120 BCV

12 UX-50 C 33 UX-120 BCDV

Notice

Error with boiler and tank level probes

If the selected model is fitted with boiler and tank level probes

and the probes are not connected, an error

E10

message is dis -

played. Conversely, if a model is selected that is not fitted with

the probes but the machine has them, an error message is dis

played:

E15

– If this error occurs, reconfigure the machine model for the elec -

tronic board.

⚠ Warning

Risk of serious injury due to operation when the

machine is faulty

Using the machine when it is faulty or in poor condition can af -

fect personal safety and damage the machine.

– If you detect any fault or anomaly in the machine, contact an

authorised service agent immediately.

Rating

Let us know what you think about the Sammic UX-120 Glasswasher by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Sammic UX-120 Glasswasher?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Sammic UX-120 Glasswasher. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Sammic UX-120 Glasswasher. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sammic. They might be able to provide an original manual. Are you looking for the manual of your Sammic UX-120 Glasswasher in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.