Home > Home & Decoration > Lamps > Qazqa Lamps > Qazqa 97679 Plater Lamp

Manual Qazqa 97679 Plater Lamp

Need a manual for your Qazqa 97679 Plater Lamp? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Please study the instruction manual and below information carefully before installing or using

1. The luminaires may only be installed by authorized and qualiﬁed technicians according the valid

regulations for electrical installation.

2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come

into contact with any areas of the terminal connections or voltage control parts.

3 The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution.

box, before any installation, maintenance or repair work is undertaken.

4. Exterior lighting must not be installed during rain.

6. Take account of the minimal separation distance from other objects and the room required around the ﬁtting.

7. If in any doubt, consult a professional, taking local installation requirements into account. Some countries

stipulate that lighting may be installed only by registered installers.

8. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V

low voltage conductors.

9. When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.

10. Clean with a clean, dry cloth or brush, use no solvent

s or abrasives. Avoid dampness on all electrical

components

11. Take account of all available technical information.

12. Take note of the symbols when connecting wires:

13. Meaning of symbols:

III

220-240V~

50Hz

Max. 50mmø

GU10

2Max.50W

IPXX

min.0,75mm²

8mm

Light Angle

35cm²

55º

SAFETY INSTRUCTION

0.5m

For indoor use only, where direct contact with water is impossible

Protection Class I: the ﬁtting must be earthed

Protection Class II: the ﬁtting is doubled insulated and does not require earthing

Protection Class III: the ﬁtting is low voltage

Minimum distance from lighted objects (meters)

Only the self-shielded halogen lamp should be used with the luminaire

Strip the wire to the indicated length (mm);different items require different length

Connect using the speciﬁed cable; different items require different cables

The type of lamp and maximum size and wattage indicated in each lighting unit must not

be exceed; different items require different kind of light sources with different bulb icons

The armature is designed to work only with the indicated voltage. Different items require

different working voltage.

The luminaire can be used in combination with a dimmer

The reference light angle and light space of the luminaire

This luminaire cannot be disposed together with normal domestic waste in standard rubbish

can, but you have to bring it to a staging area for electrical waste

This icon indicates the level of water-proof and dust-proof

N =Neutral L =Live =Earth

this product. Please keep this user manual for further reference

INSTRUCTION MANUALINSTRUCTION MANUAL

220-240V~

50Hz

IP65

1800 LM

18 W

2700 K

>80 Ra

30000 H

Plater CL

step4

Fix the expansion screws on the ceiling Fix the bracket with the screws

Connect the L、N wires

Clip the lamp to the bracket

step1 step2

step3

Plater CL White Round 18W LED

Item number: 96806

Overall size:

220x50mm

Plater CL White Round 18W LED PIR

Item number: 96807

Overall size:

280x50mm

1.To save the power,it would light on when the

environment is less than 100LUX.

Function:

2.When there is movement in the sensor area of

6-10m,it lights on automatically. And it lights off

after 30-40 seconds without movement.

Plater CL White Round 18W LED LUX

Item number: 96808

Overall size:

330x50mm

Function:

1.It would light on when the environment is less

than 100LUX,and light off when the environment

is more than 100LUX.

Plater CL White Square 18W LED Plater CL White Square 18W LED PIR Plater CL White Square 18W LED LUX

Item number: 96809 Item number: 96810 Item number: 96811

Overall size: Overall size: Overall size:220x220x50mm 280x280x50mm 330x330x50mm

Function:

1.To save the power,it would light on when the

environment is less than 100LUX.

2.When there is movement in the sensor area of

6-10m,it lights on automatically. And it lights off

after 30-40 seconds without movement.

1.It would light on when the environment is less

than 100LUX,and light off when the environment

is more than 100LUX.

Plater CL White Round LED

Plater CL White Square LED

step5

step6

Tighten the screws in the both sides of lamp

Take out the lamp from the bracket

Rating

Let us know what you think about the Qazqa 97679 Plater Lamp by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Qazqa 97679 Plater Lamp?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Qazqa 97679 Plater Lamp. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Qazqa 97679 Plater Lamp. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Qazqa. They might be able to provide an original manual. Are you looking for the manual of your Qazqa 97679 Plater Lamp in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Qazqa
Model	97679 Plater
Category	Lamps
File type	PDF
File size	13.18 MB

All manuals for Qazqa Lamps
More manuals of Lamps

Frequently Asked Questions about Qazqa 97679 Plater Lamp

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Is all LED lighting dimmable? Verified

No, not all LED lights are dimmable. This is indicated on the packaging or the light itself.

This was helpful (462) Read more

I put a new light in my lamp but it won't turn on, why is that? Verified

Some lamps are made for light sources of a specific wattage. When a light source is inserted that requires a higher wattage than the lamp can provide, the light may not turn on. If the lamp delivers a much higher wattage than what the light source is made for, the light source can burn out.

This was helpful (314) Read more

Why is the colour of light important? Verified

There generally are two kinds of light, warm light and cold light. Cold light keeps you sharp and awake. Warm light has a relaxing effect. The warmth of the light is measured in Kelvin and is indicated on the packaging of the lamp itself.

This was helpful (255) Read more

What is lumen? Verified

Lumen is a measuring unit for the total amount of visible light emitted by a source.

This was helpful (190) Read more

What screw bases exist? Verified

Worldwide there many types of sockets, but most used are those based on the Edison screw, indicated with the letter E. In most countries screw bases E27 and E14 are standard. In the United States E26, E17, E12 and E10 are standard.

This was helpful (142) Read more

What do watts say about my lamp? Verified

Watt is a measuring unit for electricity consumption. Lamps that produce more light, generally use more Watt, but for comparing light output you should always use lumen.

This was helpful (113) Read more