©2020 Koninklijke Philips N.V.
All rights reserved.
4239 001 14183
EN Note: Clean the appliance and wipe any deposits o the steamer head with a
damp cloth and non-abrasive liquid cleaning agent.
Always empty the water tank after usage, to prevent calc build-up and maintain
good steam performance.
SC
注意：用湿布和非腐蚀性液体清洁剂清洁本产品，并擦去
蒸汽喷头中的沉积物。
使用后务必将水箱倒空，以防止水垢的形成并保持良好的
蒸汽性能。
EN Problem Possible cause Solution
The appliance
produces no steam or
irregular steam.
The steamer has not
heated up suciently.
Let the appliance heat up
for approximately 1 minute.
Steam has condensed in
the hose.
Lift the steamer head
to straighten the hose
vertically. This allows any
condensation to ow
back.
Low water level in the
tank or the tank is not
inserted properly.
Rell the water tank and
insert it properly.
Too much scale has built
up in the appliance.
Perform calc-clean
process. Refer to
section.
Water droplets drip
from the steamer
head or the appliance
produces a croaking
sound.
You have left the steamer
head and/or the steam
supply hose in horizontal
position for a long time.
Lift the steamer head
to straighten the hose
vertically. This allows any
condensation to ow
back.
When the hose forms a
U-shape, condensation in
the hose cannot ow back
into the water tank.
Lift the steamer head
to straighten the hose
vertically. This allows any
condensation to ow
back.
An excessive amount of
water drips out of the
steamer head when the
appliance is heating up.
The water in the
appliance is dirty or
has been left inside the
appliance for a long
time.
Perform calc-clean
process. Refer to
section.
Water leaks out from
the steamer base.
You have not closed the
water tank cap or de-
calc knob securely.
The water tank is not
inserted properly.
Close the water tank cap
or de-calc knob securely.
Insert the tank properly.
EN To maintain optimal steam performance and prolong the lifetime of the
appliance, it is important to remove scales and impurities inside the appliance
regularly. Therefore, it is recommended to perform the de-calc process at least
once a month.
Before you start de-calc process, make sure there is some water in the water
tank.
SC
为了保持良好的蒸汽熨烫性能并延长产品的使用寿命，
定期去除产品内部的水垢和杂质是很有必要的。因此，
建议您至少每月执行一次除垢流程。
开始执行除垢流程之前，请确保水箱中留有一些水。
EN Caution: Do not attach or detach the brush/pleat maker while the steam is on
or the steamer head is hot.
SC 小心：蒸汽已打开或蒸汽喷头很烫时，不要安装或拆卸
毛刷
/
衣裤褶线夹。
EN Put the glove on the hand you are using to hold a garment. The glove protects
your hand against the steam from the steamer head.
SC
将防烫手套戴在拿着衣物的手上。防烫手套可保护您的手
不被蒸汽喷头所喷出的蒸汽烫伤。
SC 问题 可能的原因 解决方法
产品无法产生
蒸汽或产生的
蒸汽不连贯。
蒸汽挂烫机未充
分加热。
让产品加热约
1
分钟。
有蒸汽凝结在输
送管内。
提起蒸汽喷头以垂
直拉直蒸汽输送
管。这样做可使冷
凝水流回水箱中。
水箱中的水位低或
水箱未正确插入。
为水箱加水并正确
装入。
产品内积聚的
水垢太多。
执行除垢过程。
请参阅
部分。
水滴从蒸汽
喷头上滴下
或产品发出
咕噜声。
蒸汽喷头和
/
或蒸
汽输送管水平摆
放了较长时间。
提起蒸汽喷头以
垂直拉直蒸汽输送
管。这样做可使冷
凝水流回水箱中。
当蒸汽输送管处
于
U
形状态时，
输送管内的冷
凝水不能流回
水箱中。
提起蒸汽喷头以垂
直拉直蒸汽输送
管。这样做可使冷
凝水流回水箱中。
产品加热时
有过多的水
从蒸汽喷头
中滴出。
产品中的水变脏
或留在产品很长
时间。
执行除垢过程。
请参阅
部分。
蒸汽挂烫机底
座漏水。
水箱盖未盖好
或除垢旋钮未
拧紧。
水箱未正确插入。
盖好水箱盖或拧紧
除垢旋钮。
请正确插入水箱。
产品： 飞利浦蒸汽挂烫机
型号： GC528, GC529
额定电压： 220 V～
额定频率： 50 Hz
额定输入功率： 1600 W
生产日期： 请见产品本体
产地： 中国浙江慈溪
飞利浦（中国）投资有限公司
上海市静安区灵石路 718 号 A1 栋
全国顾客服务热线: 4008 800 008
本产品根据国标 GB4706.1-2005,
GB4706.84-2007 制造
1 2
3 4
GC529
_ 10 min.
_ 10 ܳ䧌
2
5
3 4
76
1
4
3
21
GC528
GC529
保留备用
发行日期：
2020-12-23
4 5
> 1 hour
> 1 ᄼᬣ
2 31
EN Note: Ensure that pole is closely collapsed without any gap in between pole
lock clips to remove the pole from its base.
SC
注意：将衣架杆从底座上取下时，请确保衣架杆紧密折
叠，衣架杆锁夹间没有任何空隙。
EN User manual SC 用户手册
Join the conversation about this product
Here you can share what you think about the Philips GC528 Garment Steamer. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.