Home > Household appliances > Cooker Hoods > Pelgrim Cooker Hoods > Pelgrim SKE905ALU Cooker Hood

Manual Pelgrim SKE905ALU Cooker Hood

Need a manual for your Pelgrim SKE905ALU Cooker Hood? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

MAINTENANCE

Fitting the carbon filter

Place the frame of the start set once. Place

the carbon filter (C, see fig. 5) in the frame in

the way that is shown and fit the filter panels

in the hood.

Changing the light bulbs

Halogen lighting

See fig. 6.

Slide the cath (1) in the direction indicated

and fold the cover (2) downwards. Pull the

bulb (3) in the direction of the arrow and out of

the holder, then fit the new bulb. Take care

not to touch the bulb with your hands when

you replace it, since direct contact with the

skin can result in the bulb burning out.

Cleaning

Cooker hood

Clean the cooker hood with soapy water and a

soft cloth, then wipe with clean water to rinse.

Do not use aggressive cleaning agents such

as soda.

Do not use any sort of scourer. Treat with

Stahlfix (supermarket) and polish with the

structure of the stainless steel.

Filters

■ Wash aluminium filters, every week in

soapy water. The cleaning agents will

make the aluminium filter turn dull, this is

normal.

■ The carbon filters cannot be cleaned to use

again.

Use

See fig. 1 and 2.

After installation

When the hood is switched on for the first

time, it runs through a phase of reset and self-

checking. At the end of this phase a stand-by

phase will be reached: motor and lamps will

be switched off.

Switching on

The hood is switched on by pressing switch

(1).

Change the speed by pressing speed switch

(2). The speed is decreased or increased by

one step. You activate the continued-running

phase by pressing button T (only for LSK).

The extractor hood switches off after about

5 minutes.

Switching off

Pressing switch (1) turns the motor off and the

hood will return to its stand-by mode. When

the hood is switched on again, the motor

resumes operation at the previously selected

speed.

Replacing carbon filters

The carbon filter must be used if the cooker

hood is not connected to a duct (see

extraction systems on page 7).

Note:

■ The carbon filter must be replaced at least

twice a year, depending on how much the

cooker hood is used.

■ Carbon filters cannot be cleaned to use

again.

■ Saturated carbon is harmful to the

environment, replace the filter regularly.

Removing the filter panel

Switch off the electricity! Remove the plug

from the socket or switch the electricity off at

the mains. Pull the grille towards you and tilt

it downwards at the front (see fig. 4).

Display and functioning of the filter

saturation indicator (only for LSK)

The degree of saturation of the grease filter is

indicated by means of a luminous display (fig.

1). If button T is pressed when the extractor

hood is switched off, the display lights up; the

colours displayed have the following

meanings:

■ green light: in use for less than 6 working

hours

■ yellow light: in use for 6 to 12 working

hours

■ red light: in use for more than 12 working

hours (the grease filter should be cleaned

or, if necessary, replaced)

USE/FILTERS

Ordering carbon filters

Type LSK 945 LSK 975 LSK 986 SKE905

Startset*

SKF 950

SKF 980 ~~

Carbon filter: KF 90

* The start set is once only

Rating

Let us know what you think about the Pelgrim SKE905ALU Cooker Hood by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Pelgrim SKE905ALU Cooker Hood?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Pelgrim SKE905ALU Cooker Hood. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Pelgrim SKE905ALU Cooker Hood. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Pelgrim. They might be able to provide an original manual. Are you looking for the manual of your Pelgrim SKE905ALU Cooker Hood in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Pelgrim
Model	SKE905ALU
Category	Cooker Hoods
File type	PDF
File size	0.1 MB

All manuals for Pelgrim Cooker Hoods
More manuals of Cooker Hoods

Frequently Asked Questions about Pelgrim SKE905ALU Cooker Hood

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How much distance should there be between my cooker hood and my hob? Verified

This can very a bit depending on the brand, but in general a cooker hood should be placed at least 65 centimeter above a gas hob and at least 50 centimeter above an electric or induction hob. This is to improve fire safety

This was helpful (1229) Read more

Do I need a cooker hood with or without motor? Verified

Cooker Hoods with motor are meant for when the air is moved directly outside. A cooker hood without motor is meant for when there is a central ventilation system. Never connect a cooker hood with motor to a central ventilation system!

This was helpful (657) Read more