4
OTHER INFORMATION
If you need to cut a pouch do so after laminating. Cut pouches can leak glue into your machine.
Pouches are also easier to cut accurately when laminated.
When the film exits after being laminated, it may be very hot and soft .Handle the newly laminated
item with care. Pressing the item with a book or other heavy objects may help make it flat and
smooth.
• We do not recommend laminating any type of self-developing photo.
• Any photo to be laminated must be dry before processing.
• Do not laminate any documents that appear thick or heavy, as they may get stuck in the
laminator.
• This product bonds the laminator sleeve to the item being processed. It is a permanent
seal and cannot be removed.
• We do not recommend laminating any collector’s item of value or any item you wish to
remove at a later date.
• Do not attempt to laminate coins or thicker items.
• Unfortunately we can not accept responsibility for any items damaged as a result of the
laminating process.
Machine Maintenance
For machine health we recommend that a page of plain paper (preferably blotting or similar paper) is
passed on its own through the machine on a regular basis. This will help to remove excess adhesive
that may have leaked from the lamination pouches. This is best done when the machine is hot.
Excess adhesive on rollers can cause spotting and may eventually cause your machine to jam.
TROUBLESHOOTING
A. If your pouch is not sealed, temperature is either too cold or there is not a big enough
margin.
B. If your pouch is cloudy the temperature is too low or the pouch to full.
C. If your pouch is wavy the temperature is too hot.
D. If there are spots on the pouch. Glue has seeped from pouches on to rollers. Run a sheet of
paper through, continue until clear.
E. Jammed Pouch – If for some reason your pouch jams, press and hold the front anti-jam
button, this separates the rollers allowing the pouch to be pulled freely.
WARRANTY
The machine has a warranty of 2 years (the warranty is not applicable if the pouches has been
inserted in the wrong position/direction, or the machines has been used for an inappropriate
purpose).
TECHNICAL DATA
Voltage....................................................................................................................220-240V
Power consumption (A4 version) ...........................................................................max 330W
Power consumption (A3 version) ...........................................................................max 350W
Max width laminating (A4 version)........................................................................230mm/9”
Max width laminating (A3 version)........................................................................330mm/13”
Max thickness laminating.......................................................................................2x125mic
Warm up time .........................................................................................................3-4min
Laminating speed....................................................................................................Approx.25cm/min
Max. Document thickness.......................................................................................0.5mm
Join the conversation about this product
Here you can share what you think about the Pavo Pixmaster Laminator. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.