Home > Audio, TV & Photo > Projectors > Panasonic Projectors > Panasonic PT-LC56E Projector

Manual Panasonic PT-LC56E Projector

Need a manual for your Panasonic PT-LC56E Projector? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

2-ENGLISH ENGLISH-3

Preparation

IMPORTANT: THE MOULDED PLUG (U.K. only)

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT

CAREFULLY.

This appliance is supplied with a moulded three pin mains plug for your

safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse

need to be replaced, please ensure that the replacement fuse has a rating of

13 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is refitted

when the fuse is replaced. If you lose the fuse cover, the plug must not be

used until a replacement cover is obtained. A replacement fuse cover can be

purchased from an Authorised Service Centre.

If the fitted moulded plug is unsuitable for the socket outlet in your

home, then the fuse should be removed and the plug cut off and

disposed of safely. There is a danger of severe electrical shock if the

cut off plug is inserted into any 13 amp socket.

If a new plug is to be fitted, please observe the wiring code as shown below.

If in any doubt, please consult a qualified electrician.

WARNING: — THIS APPLIANCE MUST BE EARTHED.

IMPORTANT: — The wires in this mains lead are coloured in accordance

with the following code: —

Green-and-Yellow: Earth

Blue: Neutral

Brown: Live

As the colours of the wire in the mains lead of this appliance may not

correspond with the coloured markings identifying the terminals in your plug,

proceed as follows.

The wire which is coloured GREEN-AND-YELLOW must be connected

to the terminal in the plug which is marked with the letter E or by the

Earth symbol or coloured GREEN or GREEN-AND-YELLOW.

The wire which is coloured BLUE must be connected to the terminal in

the plug which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal

in the plug which is marked with the letter L or coloured RED.

How to replace the fuse.

Open the fuse

compartment with a screwdriver and replace the

fuse.

ASA

13A250V

BS1363/A

HE-8

ASA

FUSE

IMPORTANT SAFETY NOTICE

WARNING:

To prevent damage which may result in fire or shock

hazard, do not expose this appliance to rain or moisture.

Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The

sound pressure level at the operator position is equal or less than 70 dB

(A) according to ISO 7779.

WARNING:

1) Remove the plug from the wall outlet when this unit is not in use for a

prolonged period of time.

2) To prevent electric shock, do not remove cover. No user serviceable

parts inside. Refer servicing to qualified service personnel.

Dear Panasonic Customer:

This instruction booklet provides all the necessary operating information that

you might require. We hope it will help you to get the most performance out

of your new product, and that you will be pleased with your Panasonic LCD

projector.

The serial number of your product may be found on its bottom. You should

note it in the space provided below and retain this booklet in case service is

required.

Model number: PT-LC80E / PT-LC76E / PT-LC56E

Serial number:

Caution:

To assure continued compliance, follow the attached installation

instructions, which includes using the provided power cord and shielded

interface cables when connecting to computer or peripheral device.

If you use serial port to connect PC for external control of projector, you

must use optional RS-232C serial interface cable with ferrite core. Any

unauthorized changes or modifications to this equipment will void the user

’

authority to operate.

Rating

Let us know what you think about the Panasonic PT-LC56E Projector by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Panasonic PT-LC56E Projector?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Panasonic PT-LC56E Projector. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Panasonic PT-LC56E Projector. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Panasonic. They might be able to provide an original manual. Are you looking for the manual of your Panasonic PT-LC56E Projector in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Panasonic
Model	PT-LC56E
Category	Projectors
File type	PDF
File size	1.82 MB

All manuals for Panasonic Projectors
More manuals of Projectors

Frequently Asked Questions about Panasonic PT-LC56E Projector

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I power off my projector immediately after use? Verified

After using the projector the lamp is still very hot. It is best to leave the projector on after use, giving the internal fan time to do it's work and cool the lamp. This will extend the lifetime of the lamp.

This was helpful (175) Read more

What is keystone correction? Verified

A projector can often not be placed straight in front of a screen or wall. The projected image can become distorted because of this. This is the keystone effect. Keystone correction is a feature that addresses this distortion. Not all projectors offer keystone correction.

This was helpful (120) Read more

What is the contrast ratio? Verified

The contrast ratio tells how far the whitest white is from the blackest black. A contrast ratio of for example 400:1 means that the blackest black on screen is 400 times darker than the whitest white. A high contrast ratio contributes to the sharpness of the image.

This was helpful (68) Read more

The menu won't appear in screen with my Panasonic projector, what should I do? Verified

Some Panasonic projectors have a function on the remote control that can hide the menu from the screen. Press the "On screen" button to restore the menu.

This was helpful (4) Read more