Home > Do-It-Yourself > Impact Wrenches > Milwaukee Impact Wrenches > Milwaukee 9070-20 Impact Wrench

Manual Milwaukee 9070-20 Impact Wrench

Need a manual for your Milwaukee 9070-20 Impact Wrench? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Attaching and Removing the Tool Hanger

(Cat. No. 9092-20, 9096-20, or as accessory)

1.To attach, remove the two

Gear

case

screws

top gear case screws.

2. Place the ring through

the tool hanger.

3. Position the tool hanger

on the tool over the two

gear case screw holes.

4. Replace the two gear

case screws. Hand tight-

en the screws.

5. To remove, reverse the

procedure.

Attaching and Removing Accessories

(Cat. No. 9071-20, 9075-20)

This impact wrench is intended only for use with

sockets designed for impact wrenches and that

have a 1/2" square drive (3/4" square drive for Cat.

No. 9075-20). Other sockets could shatter or break,

causing injury.

1. To attach a socket or other accessory, push the

accessory onto the drive shank until it snaps into

place.

2. To remove the accessory, pull it off the drive shank.

Attaching and Removing Accessories

(Cat. No. 9070-20, 9072-20, 9072-22)

These impact wrenches are intended only for use

with sockets designed for impact wrenches and that

have a 1/2" square drive. Other sockets could shatter

or break, causing injury.

1. To attach a socket or other acces-

Detent

sory, align the hole in the acces-

sory with the detent pin on the

drive shank. Hold the detent pin

in while pushing the socket onto

the drive shank. The detent pin

will snap into place in the hole

to secure the socket.

2. To remove the accessory, insert a nail or other thin

object into the hole in the accessory and press

the detent pin in. Pull the accessory off the drive

shank.

Attaching and Removing Accessories

(Cat. No. 9092-20, 9096-20, or other Impact

Wrenches using the Quick Change 1/2" Square

Drive to 7/16" Hex Adapter)

Cat. No. 9092-20 and accessory Cat. No. 48-66-0061

are intended for use with accessories with a 7/16"

Hex Quick Change shank. Cat. No. 9096-20 is in-

tended for use with accessories with a 5/8" Hex Quick

Change shank. Both Hex Quick Change shanks have

a ball-retainer groove. They are not intended for use

with Hex Shank Bit Extensions.

1. To attach an accessory, pull the chuck collar

forward and insert the accessory shank. Release

the collar. It may be necessary to pull the bit out

slightly to engage the holding mechanism.

2. To remove the accessory, pull the chuck collar

forward and remove the accessory. Release the

collar.

Open (Release)

Closed (Locked)

Ball-retainer

groove

OPERATION

WARNING

To reduce the risk of injury, always

unplug tool before attaching or

removing accessories or making adjustments.

Use only specically recommended accessories.

Others may be hazardous.

To reduce the risk of injury, always wear safety

goggles or glasses with side shields.

Using the Forward/Reverse Switch

(Cat. No. 9072-20, 9072-22, 9092-20, and 9096-20)

This impact wrench is equipped with a forward/re-

verse switch that may be set to forward or reverse

rotation.

1. For forward (clockwise) rotation, push the forward/

reverse switch in the direction shown. Check the

direction of rotation before use.

2. For reverse (counterclockwise) rotation, push

the forward/reverse switch in the direction shown.

Check the direction of rotation before use.

Forward

Forward/Reverse Switch

Reverse

WARNING

To reduce the risk of injury, keep

hands and cord away from the bit

and all moving parts.

To reduce the risk of explosion, electric shock

and property damage, always check the work

area for hidden pipes and wires

before drilling.

To reduce the risk of injury, only

grasp tool by handle and red

insulated surfaces. Do not hold

gray gear case when impacting

or drilling.

Rating

Let us know what you think about the Milwaukee 9070-20 Impact Wrench by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Milwaukee 9070-20 Impact Wrench?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Milwaukee 9070-20 Impact Wrench. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Milwaukee 9070-20 Impact Wrench. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Milwaukee. They might be able to provide an original manual. Are you looking for the manual of your Milwaukee 9070-20 Impact Wrench in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Milwaukee
Model	9070-20
Category	Impact Wrenches
File type	PDF
File size	2.35 MB

All manuals for Milwaukee Impact Wrenches
More manuals of Impact Wrenches

Frequently Asked Questions about Milwaukee 9070-20 Impact Wrench

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (6) Read more